|
Title: Edf motors Post by: Shyam Hembram on January 23, 2013, 11:08:40 PM Which motor is good for edf units, a low kv or a high kv motor.? :headscratch:
Title: Re: Edf motors Post by: santhosh-r on January 24, 2013, 05:04:52 AM For EDF high KV is suited best....correct me if I am wrong...
Title: Re: Edf motors Post by: arun.sreelakam on January 24, 2013, 07:21:45 AM It depends upon the power needed and motor specs..
Some are using 1500kv motors with 4s-6s lipo some are using 3500-4000kv motor with 3s lipo.. All with respect to the power weight ratio... :):) Title: Re: Edf motors Post by: 1firefly2 on January 24, 2013, 05:54:37 PM For bigger dia fans, go for lower KV motor. For smaller dia fans, go for higher KV motor.
Title: Re: Edf motors Post by: samant mishra on October 14, 2022, 10:20:04 PM The import part is motor wattage & higher voltage motors (6S or more) give you good results.
|