RC India

RC Equipments => Electric Power => Topic started by: Nehutech on January 11, 2010, 03:52:33 PM



Title: ESC resetting
Post by: Nehutech on January 11, 2010, 03:52:33 PM
hi to all  :salute:

is anybody aware of ESC programming and how to set all default value to ESC  :headscratch: :headscratch: :headscratch:

i m not able to program ESC  :banghead:

can any body help me  :help:

thanks  :)
nehutech


Title: Re: ESC resetting
Post by: sushil_anand on January 11, 2010, 03:57:02 PM
Check the operating manual of your ESC. Instructions are given and seem pretty clear - at least for the Castle Creation products I have used.


Title: Re: ESC resetting
Post by: anwar on January 11, 2010, 04:01:04 PM
To expand on what Sushil bhai has already said... most ESCs have no reset button/switch that puts it back in factory settings.  The manual does list what are the "default"s for each of the parameters/settings that can be changed via programming; so you have to individually set each of them to the suggested defaults one by one.

BTW, you normally do not have to do any programming on the ESC, they work right out of the box for basic flying.  It is good to know about though, and be aware of the options/possibilities  :)


Title: Re: ESC resetting
Post by: Nehutech on January 11, 2010, 04:08:48 PM
thanks for reply "sushil_anand" and "anwarbhai"

i have DYS esc and i don't have manual for it
i m searching it on net






Title: Re: ESC resetting
Post by: Hellyflyer on January 11, 2010, 07:48:27 PM
You can also try searching the manual for a programing card it can also give you a lot answers about the different options here is a pic of a turnigy programing card from Hobby king