|
Title: Help choosing the right esc.... Post by: veloci on December 20, 2012, 11:29:13 PM Hi,
I am planning to use the Hextronik DT750 for my new quad. http://www.hobbyking.com/hobbyking/store/__6247__hexTronik_DT750_Brushless_Outrunner_750kv.html Could anybody pls help me to choose the right esc for it? I am unable to decide between the following 3 options: Option 1 - http://www.hobbyking.com/hobbyking/store/__25365__Turnigy_Multistar_30_Amp_Multi_rotor_Brushless_ESC_2_4S.html Option 2 - http://www.hobbyking.com/hobbyking/store/__13429__HobbyKing_30A_BlueSeries_Brushless_Speed_Controller.html Option 3 - http://www.hobbyking.com/hobbyking/store/__2164__TURNIGY_Plush_30amp_Speed_Controller.html :help: It would also be really helpful if u can explain the reason for ur choice or/and provide a better option. Thanks in advance. :) Title: Re: Help choosing the right esc.... Post by: kartikmadhira on December 21, 2012, 12:45:01 PM Go for option 3.i have never used it but people say it is best.
Title: Re: Help choosing the right esc.... Post by: arun.sreelakam on December 21, 2012, 12:48:54 PM go for opt 3
Title: Re: Help choosing the right esc.... Post by: jaspreet.guitar on December 21, 2012, 12:57:03 PM Turnigy Multistar has a lot of mixed reviews on RC Groups, and a lot of them are negative.
Turnigy Plush is a safe bet. If you check out some of the great configs at http://rcexplorer.se/category/projects/ you would notice that they've used Plush for their tri/quads. If not Plush, then you can go for F-30A ESCs, but you would need to change the firmware to Simon K's for better performance. The link for the same is: http://www.hobbyking.com/hobbyking/store/__15205__Hobby_King_30A_ESC_3A_UBEC.html Title: Re: Help choosing the right esc.... Post by: veloci on December 21, 2012, 04:07:17 PM @kartikmadhira, @arun.sreelakam and @jaspreet.guitar, thanks for the help. BTW, Do the plush escs have high refresh rates to suit the kk2 fc? :-/
Title: Re: Help choosing the right esc.... Post by: Smirza_98 on December 21, 2012, 10:26:13 PM Open this url for choosing right and best esc for your rc plane log on to http://www.rctoys.com/pr/2006/12/11/choosing-the-right-electronic-speed-control-esc-for-your-electric-rc-airplane/
and check out some cool esc on Rcbazaar http://www.rcbazaar.com/category/47-escs-becs.aspx and on Rcbharat http://www.rcbharat.com/22-esc it is best store in india Title: Re: Help choosing the right esc.... Post by: KALYANPRODHAN on December 21, 2012, 10:41:21 PM I have checked bad plush 30A. It's BEC portion gives 4.7 volt and servo jitter occur.
I will bet for Red Brick30A, if you need no programming in ESC. All the programming will go to quad control board.I Think it is the name of reliability. Also check the other feedback. You can even go for the SS series cheap materials (But not cheap in performance, at least to me). Thanks Title: Re: Help choosing the right esc.... Post by: Smirza_98 on December 21, 2012, 10:50:18 PM You check Rcbazaar and Rcbharat. I think it is cheap and best because i am use this store items and its good performs you check it now
Title: Re: Help choosing the right esc.... Post by: veloci on December 21, 2012, 10:53:44 PM How about the red brick's refresh rates? Good enough for the kk2 fc?
|