|
Title: Help needed with electrical setup Post by: manojswizera on December 16, 2011, 10:57:12 AM Friends is it possible that my motor is making no signal sound , due to a problem in ESC . can it be possible that the esc is not providing correct power to the receiver, so it is not working or unable to catch the signals from the transmitter.
But doubt is that if the esc got damaged then it cannot make the motor sound ? i am totally confused because i didnot have spare ESC to check . Title: Re: Help needed with electrical setup Post by: manojswizera on December 22, 2011, 08:01:30 AM Help.... Senior members help needed plz.
Title: Re: Help needed with electrical setup Post by: AEROVISHWA on December 22, 2011, 11:34:59 AM please post the electronics u are using. motor, esc, bat, reciever, tx etc...!
Title: Re: Help needed with electrical setup Post by: manojswizera on December 22, 2011, 05:29:50 PM The motor is CF22 from rcd. lipo is also from rcd 1350mah, Esc is 25A hobbywing, Rx and rx Esky.
|