RC India

RC Equipments => Electric Power => Topic started by: shekharsuman on November 30, 2014, 09:11:11 AM



Title: How do I use Anti Vibration Mount
Post by: shekharsuman on November 30, 2014, 09:11:11 AM
I bought these (http://www.quadkopters.com/product/flight-controllers/glass-fiber-flight-controller-anti-vibration-mount/) for mounting my KK2.1 board to my F450 frame. But it came with no instructions. How do I use these?


Title: Re: How do I use Anti Vibration Mount
Post by: SK1701 on November 30, 2014, 09:33:54 AM
I am not sure which way is up on this mount. There appear to be adhesive pads on it as well as holes for nylon bolts. You will need to use the pads along with M3 size nylon nuts, bolts and standoffs for mounting though I am not sure whether the nylon bolts are for attaching the kk to the mount or the mount to the frame.
Maybe you could send an email to webmaster@quadkopters.com to confirm.


Title: Re: How do I use Anti Vibration Mount
Post by: phanivyas on November 30, 2014, 09:36:28 AM
Just use double sided sticky tape to mount your KK board to the mount.


Title: Re: How do I use Anti Vibration Mount
Post by: sooraj.palakkad on November 30, 2014, 09:40:48 AM
double side tape is the best Idea


Title: Re: How do I use Anti Vibration Mount
Post by: shekharsuman on November 30, 2014, 09:49:53 AM
Ok. Thanks all. I will mount it on my Frame and then upload a pic.