RC India
Welcome Guest, please login or register.
 
Pages: [1]   Go Down
0 Members and 1 Guest are viewing this topic. Topic Tools Topic Tools 
Read
« on: June 30, 2018, 11:24:26 AM »
pravalika
Plane Lover
Active Member
**

Reputation Power: 1 
pravalika has no influence.
Offline Offline

City: HYDERABAD
State: Telangana
RC Skills: Intermediate
Posts: 2
Join Date: Jun, 2018




hi, iam doing a small project(rc plane) for which iam using an AVIONIC 380KV motor with 80Amp ESC(inbuilt UBEC) along with 6S Li-Po battery(22.2V 8000mah 25C).. But when i connect all these for testing..the motor is not working properly..its glitching or just vibrating. when we check for faults and we tested with a 4 cell 35C battery, it worked..i want to run it on 6S battery..Please do help me how to adjust it...Does adding a capacitor(25V) solves the problem. Please help me....
Logged
 

Read
« Reply #1 on: June 30, 2018, 11:32:20 AM »
prabal276
In the Air
Plane Lover
Forum Hero

*****

Reputation Power: 15 
prabal276 has no influence.
Offline Offline

City: Delhi
State: Delhi
RC Skills: Intermediate
Posts: 1417
Join Date: Mar, 2013

One step at a time :)



According to me, the motor would vibrate only when there is a lose connection/ short circuit between the motor and esc. But since you say that the motor works fine with the  4S, we can rule that possibility out.
There can be two problems according to me:
1) The 6S connector is faulty or There may be some place where the wires may be loose. Maybe inside the battery. Have you tested it elsewhere?
2) The specific ESC/Motor is not designed to take on a 6S. Are they both certified for 6S Operation?
Regards
Logged
 

Read
« Reply #2 on: June 30, 2018, 11:35:19 AM »
pravalika
Plane Lover
Active Member
**

Reputation Power: 1 
pravalika has no influence.
Offline Offline

City: HYDERABAD
State: Telangana
RC Skills: Intermediate
Posts: 2
Join Date: Jun, 2018



Thanks for your concern, Ive got the motor from RCBAZAAR IN BANGLORE 
 http://rcbazaar.com/product.aspx?productid=8315
It says tht we can use a 6cell battery
Logged
 

Read
« Reply #3 on: June 30, 2018, 11:40:32 AM »
prabal276
In the Air
Plane Lover
Forum Hero

*****

Reputation Power: 15 
prabal276 has no influence.
Offline Offline

City: Delhi
State: Delhi
RC Skills: Intermediate
Posts: 1417
Join Date: Mar, 2013

One step at a time :)



What about the ESC? Is it 6S compatible?
Have you used the 6S elsewhere? Can you confirm using a multimeter if the voltage is 22.2? Move the plug around while checking with a multi. If there is a loose joint somewhere, it may show up.
Logged
 

Read
« Reply #4 on: June 30, 2018, 12:30:14 PM »
Balakrishna Reddy
Plane Lover
Forum Hero
*****

Reputation Power: 8 
Balakrishna Reddy has no influence.
Offline Offline

City: Hyderabad
State: Telangana
RC Skills: Intermediate
Posts: 698
Join Date: Feb, 2015



Do you have any other ESC or motor which supports 6S configuration so that you can conclude the reason for problem. What ESC are you using? Can you provide the specs and also you can try searching if someone else face the same problem with that particular ESC.
Logged
 

Read
« Reply #5 on: July 02, 2018, 06:52:30 PM »
girishsarwal
Plane Lover
Forum Hero

*****

Reputation Power: 17 
girishsarwal has no influence.
Offline Offline

City: Gurgaon
State: Haryana
RC Skills: Beginner
Posts: 1420
Join Date: May, 2012

DIYer



Dont forget to check you motor connection A-B-C wires... it is symptomatic of a loose connection. maybe a couple.
Logged

gs
 

Pages: [1]   Go Up
Jump to:  

Related Topics
Subject Started by Replies Views Last post
Gyro output, digital mode and ESCs
Radios and Receivers
anwar 10 7345 Last post May 28, 2010, 07:40:25 PM
by anwar
ESC AND BATTERY POWER
Electric Power
JKKASTA 12 7421 Last post July 23, 2010, 02:33:01 PM
by xxkrishxx
How much of a thrust is sufficient to takeoff a plane and fly it normally?
RC General Topics
ashutoshn 12 7185 Last post May 17, 2011, 09:59:38 PM
by ashutoshn
B6AC 80W Dual Power Battery Charger w/ Power Supply
For Sale
buzz_rc 5 2994 Last post December 04, 2015, 11:44:42 AM
by Insatiable
Difference between Channel 3 throttle output and pwn output ?
Chatter Zone
riteshbrd 11 2365 Last post August 16, 2020, 07:20:55 PM
by riteshbrd