guys,

in my never-ending urge to fly...............crossing various tech hurdles and so much support from you all..............i suddenly realised today that i may have put all my props likewise irrespective CW/CCW motors.

hurried home corrected the props(as per my satisfaction)................and tried to fly.....................as usual it didnt fly and this is what happenned......................3 out of 4 motors have the problem shown in the image.

the only motor going great is intact and the prop works awesome...............the other 3 are what you see in the image....................

first - are the motors gone
second - what might have gone wrong
third - i am using avionic hexa quad fc and the arrangement of esc on the fc is 1-1 / 2-3 / 3-2 / 4-4 (fc-esc)

have i messed it up...................i am planning to throw in the towel................guide and help

you cannot do hit and trial with Prop and motor direction, they have to be perfect.

remove props check each motor for correct rotation.

identify the props which are clock and anticlock, write on them with marker.

then try.

usually motors do not get faulty so easily.