|
Title: Multiplex Fox : E Conversion Post by: rcforall on August 10, 2009, 02:47:00 PM Hi Guys ,
Converted the Multiplex FOX to electric using the following set up : Motor : 2204/14 ESC : 10 amp Battery : 2S 7.4V 300 - 500 and 850 Mah Servo Aileron : DY0204 6 gms Servo Elevator : DY0203 4.4 gms Prop Pylon Racer : APCE 7 x 5 Battery : 7.4V 300 mah OR 500 Mah OR 850 Mah Receiver : X8 R6M 6 channel 2.4 G Assan receiver This has been one of my best conversions yet very satisfying. The plane is super strong and took a direct hit to the nose in dive from around 50-60 ft and was repaired in around 10 mins .Its a kind of cross between EPP and Elapor that makes it so strong. The plane is very reponsive and fast and with throttle at zero glides very well which is its original characteristics in any case. Here are some photos ;D ;D Sai Title: Re: Multiplex Fox : E Conversion Post by: rcforall on August 10, 2009, 02:49:24 PM Some more Photos
Title: Re: Multiplex Fox : E Conversion Post by: rcforall on August 10, 2009, 02:51:46 PM Just one more .
Saju is going to make it a Baby easy star dosn't it look similar :D :D Title: Re: Multiplex Fox : E Conversion Post by: rcforall on August 10, 2009, 03:31:46 PM Sahil ,
cord of Fox is 92 mm Sai Title: Re: Multiplex Fox : E Conversion Post by: sahilkit on August 10, 2009, 09:12:54 PM thanks sai
|