RC India

here is my incomplete cessna 182 made from dblums plans...
please help me choose a motor for it  :help:
diameter of motor should not be greater(strictly) than 21 mm
(some details length = 30cm wingspan = 48cm approx.)

you can use avionics micro brushless motors what is the weight of your model

please provide a link
and i am going to use a 3x2 or a 3.75x3 prop...
please suggest which prop to use..

8x3.8 on a 2s you will get 650 to 700gms thrust http://rcbazaar.com/products/1944-avionic-m223015-kv1780-micro-brushless-motor.aspx (http://rcbazaar.com/products/1944-avionic-m223015-kv1780-micro-brushless-motor.aspx)

why can't you go further

what is the weight please tell according to it we can suggest you what motor to use

well you can see its a small model and there is a room for max 3.75x3 prop.
and i haven't weighed it yet..
but will tell you as soon as possible
anyways thanks for your quick reply

Help plz !!! :help:

if it is so you would need a heli motor cuz they have extreme high kvs and if you use 4" prop it will be enough for you

i'll search and suggest you a motor

are you serious can you use a 4" prop please tell

what battery are you going to use

how much are you willing to spend i will recommend these two motors
for 3shttp://www.hobbyking.com/hobbyking/store/__8140__Turnigy_2211_Brushless_Indoor_Motor_2300kv.html?strSearch=2211 (http://www.hobbyking.com/hobbyking/store/__8140__Turnigy_2211_Brushless_Indoor_Motor_2300kv.html?strSearch=2211)
for 2shttp://www.hobbyking.com/hobbyking/store/__8479__Turnigy_1811_Brushless_Indoor_Motor_3800kv.html?strSearch=1811 (http://www.hobbyking.com/hobbyking/store/__8479__Turnigy_1811_Brushless_Indoor_Motor_3800kv.html?strSearch=1811)
both produce around 300gms of thrust

Rcnitesh - One advice,please dont double post,just click on modify and TA-DA !

sorry priyum bhaiya i find you everytime to correct me thanks for that
edit: changed sir to bhaiya

Don't call me sir,i'm just 17 :P your'e welcome.

only 4 years difference :giggle:
i've got your trick see the above post

by the way your model is pretty good i liked the landing gears especially
is it a scratchbuild or a arf

again thank you rcnitesh sir for your valuable time and advice :bow: :salute: :hatsoff:
its a complete scratch build
sir i'm going to use a 2s system so plz suggest best motor from above two that you mentioned
sorry to bother you again  :-\
here is another picture that will give you nice idea of the dimensions of this plane !!!
as you can see i can't go beyond 3.75 inch prop

you can use the second motor I asked the hobbyking people they said the second one is better for 2s go for it enjoy flying
don't call me sir iam 13 years old