Hey,
Even though i called sanjay sir last evening and he gave me great advice,
i want more suggestions.
I have soldered my xt 60 to my esc and at the same time i connected the xt60 battery counterpart to it so as to reduce the heat.
Then i soldered the positive connector of the battery to the + side of the xt60. When i touched the - connection of the battery to the - of the xt60, sparks were observed!
Refer to the dig. below. all the connectors exept the neg. battery connector were soldered and heat shrinked. sparks are observed when it is touched to the xt60.
Is my NEW 40amp esc faulty?
or there may be a solder somewhere between the xt60?