RC India
Welcome Guest, please login or register.
 
Pages: [1]   Go Down
0 Members and 1 Guest are viewing this topic. Topic Tools Topic Tools 
Read
« on: April 18, 2015, 08:54:15 AM »
SK1701
Heli Lover
Forum Hero

*****

Reputation Power: 11 
SK1701 has no influence.
Offline Offline

City: Montreal/ Bangalore
State: OUTSIDE INDIA
RC Skills: Intermediate
Posts: 888
Join Date: Oct, 2014

set acc_hardware = 1




My quadcopter came with a set of 4 SunnySky x2212 980kv motors. The prop adapters on 2 of them got worn and so I have bought replacements from 2 sources: BangGood and Ebay. When they arrived, I noticed that they are longer than the stock prop adapters that I had received. I have also noticed that the bolt holes are very slightly misaligned. The holes on the motor are further towards the motor edge than on the prop adapter. I can bolt the prop adapter on most of the way but when I try to put a prop on a gap opens up between the adapter and the motor housing.
Could it be that the motors are fake? I assumed that here was a problem with the first set of adapters but it can't be now that the second set also do not fit. What can I do about this? Has anyone else faced this issue.
Logged

 

Read
« Reply #1 on: April 18, 2015, 09:25:50 AM »
ashimda
Plane Lover
Forum Hero
*****

Reputation Power: 8 
ashimda has no influence.
Offline Offline

City: kolkata
State: West Bengal
RC Skills: Beginner
Posts: 590
Join Date: Nov, 2013



Banggood and some ebay sellers are selling Fakes, so it would be safe to assume there adapters are fake as well.
Logged
 

Read
« Reply #2 on: April 18, 2015, 09:36:36 AM »
SK1701
Heli Lover
Forum Hero

*****

Reputation Power: 11 
SK1701 has no influence.
Offline Offline

City: Montreal/ Bangalore
State: OUTSIDE INDIA
RC Skills: Intermediate
Posts: 888
Join Date: Oct, 2014

set acc_hardware = 1



Do you know of a place where I can purchase the original prop adapters then? I thought that it is more likely that it is a motor issue.
Logged

 

Read
« Reply #3 on: April 18, 2015, 09:40:28 AM »
ashimda
Plane Lover
Forum Hero
*****

Reputation Power: 8 
ashimda has no influence.
Offline Offline

City: kolkata
State: West Bengal
RC Skills: Beginner
Posts: 590
Join Date: Nov, 2013



Goodluckbuy sells the Original motors and parts. How many adapters do you need?
Logged
 

Read
« Reply #4 on: April 18, 2015, 09:41:39 AM »
SK1701
Heli Lover
Forum Hero

*****

Reputation Power: 11 
SK1701 has no influence.
Offline Offline

City: Montreal/ Bangalore
State: OUTSIDE INDIA
RC Skills: Intermediate
Posts: 888
Join Date: Oct, 2014

set acc_hardware = 1



I need 2 adapters for now and 2 more for later as the other prop adapters seem to be wearing out too. I will also check the bearing on my motors to see if they are the originals.
Logged

 

Read
« Reply #5 on: April 18, 2015, 09:45:43 AM »
ashimda
Plane Lover
Forum Hero
*****

Reputation Power: 8 
ashimda has no influence.
Offline Offline

City: kolkata
State: West Bengal
RC Skills: Beginner
Posts: 590
Join Date: Nov, 2013



Could you explain the wearing out situation? How are the adapters wearing out?
Logged
 

Read
« Reply #6 on: April 18, 2015, 09:47:49 AM »
SK1701
Heli Lover
Forum Hero

*****

Reputation Power: 11 
SK1701 has no influence.
Offline Offline

City: Montreal/ Bangalore
State: OUTSIDE INDIA
RC Skills: Intermediate
Posts: 888
Join Date: Oct, 2014

set acc_hardware = 1



I think I must have over tightened the nylock nuts after I had a prop fly off. The threads on the adapter are coming off and it is turning silver. One odd thing I noticed was the the thread came off like a wire as though it had been stuck on the adapter.
Logged

 

Read
« Reply #7 on: April 18, 2015, 09:51:36 AM »
ashimda
Plane Lover
Forum Hero
*****

Reputation Power: 8 
ashimda has no influence.
Offline Offline

City: kolkata
State: West Bengal
RC Skills: Beginner
Posts: 590
Join Date: Nov, 2013



Wow you have some brute strength my friend. You should use Loctite on the threads and the props will be safe, better option than going Hulk on the nuts Smiley
Logged
 

Read
« Reply #8 on: April 18, 2015, 10:09:10 AM »
SK1701
Heli Lover
Forum Hero

*****

Reputation Power: 11 
SK1701 has no influence.
Offline Offline

City: Montreal/ Bangalore
State: OUTSIDE INDIA
RC Skills: Intermediate
Posts: 888
Join Date: Oct, 2014

set acc_hardware = 1



 Giggle I did not use Loctite because I take the props off pretty often and also it is supposed to be bad for the propellor plastic. I thought that Nylock nuts would make it unnecessary anyway.
Logged

 

Read
« Reply #9 on: April 18, 2015, 10:49:20 AM »
ashimda
Plane Lover
Forum Hero
*****

Reputation Power: 8 
ashimda has no influence.
Offline Offline

City: kolkata
State: West Bengal
RC Skills: Beginner
Posts: 590
Join Date: Nov, 2013



If you have to remove props often, then you could remove the c-clip and remove the prop with the bell housing. From what I have read, during flight the bell will not fly off. but if you do its at your own risk.
Logged
 

Read
« Reply #10 on: April 18, 2015, 11:20:41 AM »
sharlock
Plane Lover
Forum Veteran
****

Reputation Power: 4 
sharlock has no influence.
Offline Offline

City: Mumbai
State: Maharashtra
RC Skills: Expert
Posts: 306
Join Date: Oct, 2010



Remember buying from Bangood they are selling fake SunnySky motors please people I would request you not to buy from this website..  may be other motors that they sell can also be fake LOL who knows...
Logged
 

Read
« Reply #11 on: April 19, 2015, 02:28:32 PM »
SK1701
Heli Lover
Forum Hero

*****

Reputation Power: 11 
SK1701 has no influence.
Offline Offline

City: Montreal/ Bangalore
State: OUTSIDE INDIA
RC Skills: Intermediate
Posts: 888
Join Date: Oct, 2014

set acc_hardware = 1



These are the photos of the bottom bearing with the circlip on. Does the motor seem original? I don't want to take the circlip off because I will probably damage it but I will if I have to. I want to decide whether to buy 2 more adapters and wait a month or just give up and order new motors depending on this.
http://i284.photobucket.com/albums/ll36/siddharth_kumanduri1/IMG_1389_zpslvuzkbqq.jpg
Sunnysky prop adapters don't fit. Fakes?

http://i284.photobucket.com/albums/ll36/siddharth_kumanduri1/IMG_1388_zpsjulzjkph.jpg
Sunnysky prop adapters don't fit. Fakes?

EDIT: Image size and BTW the motors came in a Zip-lock pouch
Logged

 

Read
« Reply #12 on: April 19, 2015, 02:49:23 PM »
ashimda
Plane Lover
Forum Hero
*****

Reputation Power: 8 
ashimda has no influence.
Offline Offline

City: kolkata
State: West Bengal
RC Skills: Beginner
Posts: 590
Join Date: Nov, 2013



Not a great resolution pic but from what I can tell it looks ok.
Does the outer ring have slits? Compare with photo I uploaded earlier.
Logged
 

Read
« Reply #13 on: April 19, 2015, 03:05:32 PM »
SK1701
Heli Lover
Forum Hero

*****

Reputation Power: 11 
SK1701 has no influence.
Offline Offline

City: Montreal/ Bangalore
State: OUTSIDE INDIA
RC Skills: Intermediate
Posts: 888
Join Date: Oct, 2014

set acc_hardware = 1



That would be my poor phone camera. The bearings do not appear to have any slits. Here is another photo:
http://i284.photobucket.com/albums/ll36/siddharth_kumanduri1/13b18ad4-1ca4-4b75-85e9-fcd8ac2c0004_zpslhsyfvwh.jpg
Sunnysky prop adapters don't fit. Fakes?


I also noticed some of my windings seem crossed and somewhat shabby. I found some more identification criteria for these fakes here. These fakes may actually just be SunnySky QC rejects.
Logged

 

Read
« Reply #14 on: April 19, 2015, 04:14:50 PM »
SK1701
Heli Lover
Forum Hero

*****

Reputation Power: 11 
SK1701 has no influence.
Offline Offline

City: Montreal/ Bangalore
State: OUTSIDE INDIA
RC Skills: Intermediate
Posts: 888
Join Date: Oct, 2014

set acc_hardware = 1



Something doesn't seem right. As per the spec diagram on the SunnySky website (attached) the length of the complete prop adapter should be 22.5mm. I do not own callipers but with a ruler the new prop adapters I bought (From BG as well as EBay) appear to be around that length. However the stock prop adapters measure barely 2cm.
The motors came in a zip-lock type pouch with all accessories in another small pouch inside. However the SunnySky website says that they do not use such packaging and that the motors should come in a heat sealed thick plastic pouch. I have sent an email to SS asking how I can make sure that is fake.
The Spec Sheet:
http://i284.photobucket.com/albums/ll36/siddharth_kumanduri1/Screen%20Shot%202015-04-19%20at%204.01.02%20pm_zpsw598d2eb.png
Sunnysky prop adapters don't fit. Fakes?

The correct packaging:
http://i284.photobucket.com/albums/ll36/siddharth_kumanduri1/Screen%20Shot%202015-04-19%20at%204.07.13%20pm_zpskedfl7ui.png
Sunnysky prop adapters don't fit. Fakes?

Inadvertently funny warning from SunnySky. I received this sort of packaging. Oh No!:
http://i284.photobucket.com/albums/ll36/siddharth_kumanduri1/Screen%20Shot%202015-04-19%20at%204.09.11%20pm_zpsfjx0rzp9.png
Sunnysky prop adapters don't fit. Fakes?

http://i284.photobucket.com/albums/ll36/siddharth_kumanduri1/Screen%20Shot%202015-04-19%20at%204.09.32%20pm_zpst3rww5le.png
Sunnysky prop adapters don't fit. Fakes?

EDIT: I thought I ought to mention. My motors had been running oddly warm on 10x4.5 with 3S. Especially considering the fact the people have reported them running cool on 4S!
Logged

 

Read
« Reply #15 on: April 21, 2015, 12:05:44 PM »
ujjwaana
Plane Lover
Forum Hero

*****

Reputation Power: 28 
ujjwaana barely matters.ujjwaana barely matters.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Intermediate
Posts: 2384
Join Date: Oct, 2009



GoodLuckybuy, FoxTech, HiModel, FPvModel etc are few places who sell Genuine SunnySky Motors. You cannot be sure about ANY Ebay shop unless it is a front shop for existing hobbyshop, like that of GoodLuckyBuy
Logged

Futaba 8FG Super | HK-450v2 | FA-22 Raptor |AXN Floater-Jet | FunJet | Black Horse Edge 540 | Amp Master 015 | 2.3M Big Brother
 

Read
« Reply #16 on: April 27, 2015, 07:43:05 PM »
SK1701
Heli Lover
Forum Hero

*****

Reputation Power: 11 
SK1701 has no influence.
Offline Offline

City: Montreal/ Bangalore
State: OUTSIDE INDIA
RC Skills: Intermediate
Posts: 888
Join Date: Oct, 2014

set acc_hardware = 1



UPDATE: I have come to a more than satisfactory resolution with the LHS. I bought 4 new motors at a discount 6 months after buying the original motors. I received them today and they appear original in all regards. Thanks to Satya Sir and his great support.  Hats Off Here are the main differences I have noticed between the originals and fakes:
  • The original motors come in a box with heat sealed plastic pouches inside. The adapters are in a separate pouch. Apparently the original boxes have a blue wire visible in  the picture of the motor.
  • The original bearing and its retainer is very different. The slots are clearly visible on the bearing. I will put up a pic soon.
  • The shaft extends further downwards in the original.
  • The original prop adapter is longer and fits more snugly
  • The original screws are different. The original adapter screws (6pcs) have flatter heads as compared to the rounded ones of the fake. The original mounting plate screws are silver rather than black and the plate itself is thicker
Logged

 

Read
« Reply #17 on: April 28, 2015, 10:53:25 AM »
satyagupta
Heli Lover
Forum Hero

*****

Reputation Power: 29 
satyagupta barely matters.satyagupta barely matters.
Offline Offline

City: Navi Mumbai
State: Maharashtra
RC Skills: Beginner
Posts: 2565
Join Date: Mar, 2012



Hey Siddharth,

You are welcome but when you are stating this i would also like you to please state when was this motor bought and was this motor bought alone or it came along some kits. Also i discussion that happened between us. The problem you faced and the cause that i stated.

Please dont mind but customers would start judging the quality and issues with the motors that we sale.

Thumbs Up
Logged

 

Read
« Reply #18 on: April 28, 2015, 11:15:52 AM »
SK1701
Heli Lover
Forum Hero

*****

Reputation Power: 11 
SK1701 has no influence.
Offline Offline

City: Montreal/ Bangalore
State: OUTSIDE INDIA
RC Skills: Intermediate
Posts: 888
Join Date: Oct, 2014

set acc_hardware = 1



Of course sir.
I got these motors as part of the Reptile ARF kit back in October. Satya Sir was notified that there was an issue with prop adapters by another customer and he has now switched to another supplier. That is why the kit was out of stock for some months.  The motors being sold now on QuadKopters are genuine. Once again, hats off to Satya Sir for helping me resolve this issue 6 months after the date of purchase. I feel very happy to have such LHS.  Hats Off

I have flown with the motors for the first time today and I have noticed that they run cooler than the other ones.
Logged

 

Read
« Reply #19 on: May 05, 2015, 12:54:01 PM »
SK1701
Heli Lover
Forum Hero

*****

Reputation Power: 11 
SK1701 has no influence.
Offline Offline

City: Montreal/ Bangalore
State: OUTSIDE INDIA
RC Skills: Intermediate
Posts: 888
Join Date: Oct, 2014

set acc_hardware = 1



Does anybody know where I can get the FAKE adapters? I want to put the 4 fake motors I have to some use.
Thanks
Logged

 

Pages: [1]   Go Up
Jump to:  

Related Topics
Subject Started by Replies Views Last post
Prop Adapters required URGENTLY
Wanted
VC 0 1871 Last post February 04, 2011, 07:21:05 PM
by VC
WANTED:prop adapters
Wanted
rohan123 2 1775 Last post November 19, 2014, 02:20:37 PM
by rohan123
Sunnysky 2212 prop adapters
Wanted
SK1701 1 1615 Last post February 21, 2015, 12:15:24 AM
by shreeyak
Beware of Sunnysky fakes.
Electric Power
ashimda 8 6229 Last post April 13, 2015, 11:16:43 AM
by ashimda
sunnysky 2212-13 kv980 ccw and cw prop adapters
Wanted
kenistan 5 1186 Last post July 29, 2021, 09:48:55 PM
by Mohammed Naveed