QUADCOPTER PARTS FOR SALE: LASERCUT IN CLEAR BULLETPROOF ACRYLIC  [ BREAK IT IF YOU CAN ]

Firstly a like to thank DIY DRONES for designing the primary drawings of the plates, but to start with it has the following major improvements: -

1: Material used is bullet proof 5 mm clear acrylic, but the DIY DRONES uses 2.5 regular brittle nylon – breaks easily

2: Battery mount only holds the battery but does not protect it from crashes in the DIY DRONES design , the battery mounts holds and protects that's why it's made of 5 mm plates

3: Motors mount are of 5mm with convertible motor holes, you can use any bolts to mount them.

4: Landing gear design is remarkable improvement, the clearance from ground is high so that you can mount both battery and your camera pan and tilt in the belly of the QUAD itself [ approx. 17cms ]

5: Center dome arms can be engraved with your own text itself [ This requires minimum 3 days ].

6: Iam not providing arms because you can easily cut them with ½ inch by ½ inch aluminum rod which is easily available anywhere in the country, only 4 holes to be made and you are ready to go. This makes replacing the frequently breaking arms a easy task and affordable [ less than 25/- per arm ].

The cad designs for the arms of 30 cm profile can be made easily, just print the PDF document on any sticker sheet and stick on either ends, and drill it with 3mm drill bit.

ONE TIME INVESTMENT FOR ALL YOUR FUTURE QUAD UPGRADES

1.   CENTER PLATE – [ 5 mm PLATES ]  150 /-    [ 2 NEEDED ]

2.   CARRIER BOARD FOR ELECTRONICS – [ 5 mm PLATES ] 100 /- [2 OR 3 DEPENDES ON YOUR ELECTRONICS ]

3.   BATTERY HOLDER [ 5 mm PLATES ] 110 /- [1 NEEDED ]

4.   LANDING GEAR [ 3 mm PLATES ] 35 /-   [ 4 NEEDED , BUT ARRANGEMENT SHOWN IS WITH 8 (PERFERED) ]

5.   CENTER DOME ARC [ 5 mm PLATES ]  20 /- [ 4 NEED WITH CENTER CIRCULAR ]

6.   CENTER PLATES OF DOME ARC [ 5 mm PLATES ]  30 /-  [ COMES IN BACK OF 2 ]

7.   BLDC MOTORS MOUNT [ 5 mm PLATES ] 30/- [ INCULDES UPPER MOUNT AND LOWER GRIP ]

Apart from the above plates, you will need 3mm 8cms M3 bolts and matching nuts. Not included in the package but will be provided on request if you need. And please use nylon spacers for mount electronics and battery plates to maintain a perfect level so the your gyros with be on a level.

Please note:PDF FOR ARM HOLES WILL GIVEN TO THE BUYER, IT TAKES LESS THE 5 mins TO COMPLETE A ARM, WITH ONLY 6 HOLES TO DRILL ON 1/2 AN 1/2 ALUMINUM RODS.
CAN FOUND EASILY,,,, 

SOME MORE PICS

I WILL SOON MOUNTING THE CENTER DOME ASSEMBLY AND THE CENTER FOR THE DOME ASSEMBLY, AFTER WHICH I WILL UPLOAD THE PICS AGAIN 

sir
want QUAD FRAME.
Available?

-sathish

yes call me on 9902222294

Quote from: hemanthtguru on July 15, 2011, 10:11:49 PM
HI GUYS,

WHEN ASSEMBLED CORRECTLY, WITH WIRES THROUGH THE ARMS YOU CAN GET THE RESULTS AS IN THE PIC BELOW

[Moderator Edit]Please avoid the unnecessary usage of uppercase letters.

This would be better.

QuoteWhen assembled correctly,with wires through the arms you can get the results as shown in the pic below.

Sir, What will the price for whole quad frame (with everything)? thx

420 for the frame and 70 rs for the aluminum rod 

and it needs landing gear 25 rs each u need 4 but i prefer to use 8 for extreme tough frame 

Hai,
I want quad frame but you not resive phone. call on 9845952185

Quote from: hemanthtguru on July 15, 2011, 11:28:42 PM
420 for the frame and 70 rs for the aluminum rod 

and it needs landing gear 25 rs each u need 4 but i prefer to use 8 for extreme tough frame 

Could u please tell the complete product price in one piece like the one in photograph?

do u want even the motor and the controller for ur quad...

no only the cost of complete frame w/o motors, escs and CB.

500 rs for the frame with one landing gear on each arm....

ok Sir, book one for me with two landing gear on each arm. let me know the full amount with shipping included to NOIDA & provide ur bank details also. Thx

Hi guys news stocks just arrived the total frame cost the 650 + shipping, please order the landing according to your requirements........

5 in stock please contact me on my email.

Hemanth, Please list exactly what is included. The assumption is all the parts mentioned in the first post in the quantities mentioned are included. If it is the complete list, put me down for one too.

Based on my experience, you need to be clearer on what all exactly you are selling and their condition.

ok sir i will editing the post in meanwhile 

why contact on email when we can deal here? please provide ur bank details. Thx

I would also need couple, if it comes with everything shown in the picture with the APM on it.

thanks for the asking anwar sir, the frame is there with APM and also the sonar and the GPS but the APM + upgrades cost around 16,500 only for the control system.

if ur ready to pay the price i can build and produce the frames with APM on it.


Thanks

Hemanth

to CrazyPilot

I have no problem dealing here, but the only reason i asked u to contact me on my email is that i can keep a track of our conversation easily. 

Quote from: hemanthtguru on July 18, 2011, 08:32:50 PM
thanks for the asking anwar sir, the frame is there with APM and also the sonar and the GPS but the APM + upgrades cost around 16,500 only for the control system.

This thread is about the frame.  We all are talking ONLY about the frame.  Please do let me know the price of the frame AS SHOWN on the picture with the APM on it.

And that does mean including all the screws and nuts.

the frame with one carrier plate for electronics cost 640 - landing rs 35 each

Quote from: hemanthtguru on July 18, 2011, 08:34:26 PM
to CrazyPilot

I have no problem dealing here, but the only reason i asked u to contact me on my email is that i can keep a track of our conversation easily. 

Sir, If u r the seller then customer preference comes first. i am not comfortable with email communication. i find it easy to type here. hope u get my drift

Quote from: hemanthtguru on July 18, 2011, 08:43:06 PM
the frame with one carrier plate for electronics cost 640 - landing rs 35 each

I guess English is a tricky language... so let me try again.  What is the cost of a frame that has EVERYTHING in that picture (except the APM circuit boards) ?  I have no clue what you are calling the "carrier plate" etc mumbo jumbo is... so I am trying to make the requirement as black and white as I can.

Guru give your bank details , i want one quad frame,8 landing gear,bolt nut and nylon spacer.

Quote from: CrazyPilot on July 15, 2011, 11:22:40 PM
Sir, What will the price for whole quad frame (with everything)? thx

Anwar Sir, I am trying to get that since the reply quoted above.   

do mean that i have to include the motors and the esc also....or just the frame with the arms....

anwar sir please contact me on my number 9902222294 or pls give me urs ........

I did not see any motor etc on that picture...  so just the frame please.

PS: Not sure how I can make this any more obvious

700 rs with stock type low landing gears.........shipping extra

Thank you for your input.  Now it seems there are multiple types of landing gears... but only one is shown in the pictures ?

So the price of the frame alone, as shown in those pictures is Rs700 plus Rs35 shipping ?

there are 2 type, one which is the picture with the APM and all the electronics mount on it [this pic is made is cad]..........

and the other with all only the frame the apm on it [the actual pic] ----> 35 each

Ah, you are referring to the one in reply #4. That would be fine.  And I guess that includes the mounts for the motors too ?

yes sir it comes with package.....

Hemanth, you really need to learn to communicate clearly. If you have to, list out items and price explicitly. In addition to the first post you have posted various prices in this thread. What do you get with each ?

Quote from: hemanthtguru on July 15, 2011, 11:28:42 PM
420 for the frame and 70 rs for the aluminum rod 

and it needs landing gear 25 rs each u need 4 but i prefer to use 8 for extreme tough frame 

Quote from: hemanthtguru on July 17, 2011, 09:34:57 AM
500 rs for the frame with one landing gear on each arm....

Quote from: hemanthtguru on July 18, 2011, 11:07:16 AM
Hi guys news stocks just arrived the total frame cost the 650 + shipping

Quote from: hemanthtguru on July 18, 2011, 08:43:06 PM
the frame with one carrier plate for electronics cost 640 - landing rs 35 each

Quote from: hemanthtguru on July 18, 2011, 09:00:30 PM
700 rs with stock type low landing gears.........shipping extra

PS: I'm still waiting for the missing items. Reply to my PM. I can post pics in the other thread for everybody to see the difference in advertisement and actual stuff.

+ 1 rotor zone ...i feel the same.......

Can you provide the longer landing gears (I guess 8 of them) as an option to the frame in reply #4 ?  If YES, please post the price for the same.

Just to confirm, my understanding is that the frame ALONE in Reply #4 is Rs700 with Rs35 shipping... if this is incorrect, please confirm now.  On top of this, if you can provide the longer landing gears, then clearly mention the price for 8 of those (just like in the pictures in the first two posts of this thread).

no sir the shipping is not rs 35 i said each long landing gear is rupees 35

TO RotorZone

the price was for different variants of the frame like

--> one with only center plates and mounts
--> one with only center plates, mounts and the electronics carrier plate and also on...

Hemanth, for God's sake, stop replying in riddles. Just tell us how much it (all parts included - center plates, mounts and the electronics carrier plate etc. etc. etc.  ) costs inclusive of shipping to any part of India. I've sent you a PM to this effect.

Moderators, I request you to lock this thread once and for all if this gentleman still does not clarify things. this deal is now getting really complicated.

sir please do get confuse

iam clearly mentioned the prices in the first post itself and i would to say two things correctly

first
there are variants of the frame....
1: No landing gear -- 650 rs
2: low rise landing gear --- 70 rs
3: high rise landing gear --- 35 rs each [can be used with any of the above variants of the frame] u may use 4 or 8 depending on the ur design

second
i will assembling all that types of the frame and posting pics soon

please bear with sorry for the confusion

 

Sorry Boss. I would rather go with the others like Anam who are offering a similar Quad frame at around the same price with no confusion whatsoever. There are just too many options in this deal, and perhaps I lack the patience to negotiate through your complicated sales pitch.

All the best.

sir the whole frame cost 650 without the landing gears ,

high rise landing gear @ 35rs each

shipping at actual

please wait for a day or two ...i will provide everyone interested  with correct and proper parts listings....supported by clear pictures. and prices..... till then please have patience
till then i request everyone interested to place their order again  after the clear pictures of parts along with their parts have been posted..

I am extremely sorry for the inconvenience caused ........
Thank you
Hemanth

I would suggest you should lock this thread and start a new one without any complications and with pictures this time and don't play with 4 or 8 landing grears as everyone would want a solid frame and not a weak one so just keep 2 choices one with landing gear of type 1 and the other with type 2 . Keep it clean and simple

Locking this one.  Hoping to see two separate threads, one with low rise landing gears and another with high rise landing gears.  Wherever possible, the quantity of landing gears should be 8, as most people are interested in those. The price of spare landing gears may be quoted as extra.