For Sale Trex 500ESP, full Carbon Fiber and metal alloy heli with torque tube drive, approx 25 flights old, very clean, with a custom built carry case.
Extremely well built as per Finless Bob’s instruction videos on helifreak. Upsizing to a bigger heli hence selling.
U get 9-10 mins of normal flight and 7-8 mins of 3D with the 3000mah packs.
Here’s what is included:
T-Rex 500 ESP w/ Align RCE-BL60G ESC (w/5-6V step-less adjustable BEC) & Align BL500L Motor (1600Kv) x 1
Futaba GY 401 gyro x 1
Futaba S9254 Tail Servo x 1
Align DS510 x 3
Turnigy 3000mah 6S 40C packs x 2
Spares:
H50010 Flybar Rod (3)
H50018-1 Main Gear Set x 2
H50086 - Main Shaft (3)
H50023 Feathering Shaft
H50040 - Tail Boom (3)
Turnigy 3000mah 40C battery
H50097 Tail Drive Gear - 1
H50049T Canopy Mounting Bolts - 1
H50090T Skid Pipe - 1
H50008 Flybar Cage - 1
GT 500-216 AntiRotation Bracket - 1
HK500 Flybar Cage - 1
DS520 Gear Sets - 2
2 in 1 Custom Built Carry Case & Field Sitting Bench (after you remove the heli of course!)
Training Gear can be arranged if needed.
A small time scratch on the canopy as seen in pic and batts are a bit puffy, as are all turnigys these days, but gives full discharge and capacity at rated current. These are excellent batts.
A link of the item. Config has changed a bit recently but largely the same.
http://www.espritmodel.com/index.asp?PageAction=VIEWPROD&ProdID=8998Cost me well over 55k for everything. Open to realistic offers.
I fly the heli with an AR7000 rx and can leave that in, just in case you fly with Spektrum/JR gear. That will be extra though. In fact I have a Spektrum Dx7 Radio with 4 x AR7000’s and 1 x AR6200 and 1 x AR6100E set up for sale as I am upgrading to a 10 ch Futaba. Chck out the thread here:
http://www.rcindia.org/for-sale/spektrum-dx-7-with-5-receivers-ar7000's-ar6200-ar6100e/msg51596/PM or call me (09818215208) if interested. Items are Delhi based.
Cheers....