Title: thunder tiger raptor 30v2 nitro helicopter (rtf) Post by: makntos on April 29, 2011, 03:08:42 PM 1. Re-designed and Strengthened Sideframes
2. Rugged Collective Pitch Control Arm 3. New Canopy and Decal 4. Enlarged Engine Starting Shaft from 5mm to 6mm 5. Extended Cooling Fan Shroud 6. Solid 6mm Spindle 7. Oversized Tai Rotor Grip as R60 8. Lengthened Vertical Fin by 10mm 9. Rigid Boom Support With Plastic End 10. Wider Tank with 340cc Capacity 11.engine os max 32 sx with hirobo muffler 12.servos futaba throttle-futaba s3003 ailrons-futaba s9252 elevator-s9252 rudder-s9254 pitch-s9151 13.gyro futaba gy401 14.reciever 8 channel 15.ubec hobbywing 3a or max 5a,2 to 6s lipo 16.tower pro battery volt meter 17.wooden main blades transmitter futaba 6ex 6 channel with futaba orignal 9.6v nicd battery for tx and orignal futaba tx charger all you need is a rx battery,starter and fuel to get airborn, this heli has had about 3 hours of flight on it,and my price is Rs 43,000 and shipping at actuals Specification Full Length of Fuselage(mm / in.) 45.27" (1150mm) Full Width of Fuselage(mm / in.) 5.51" (140mm) Total Height(mm / in.) 15.75" (400mm) Main Rotor Dia(mm / in.) 49" (1245mm) Tail Rotor Dia(mm / in.) 9.3" (236mm) Gear Ratio 9.56:1:4.57 Full Equipped Weight(g/ lbs.) 6.6 lbs (3000g) Title: Re: thunder tiger raptor 30v2 nitro helicopter (rtf) Post by: sachinsonawane06 on May 01, 2011, 02:21:43 PM offer price plz...
Title: Re: thunder tiger raptor 30v2 nitro helicopter (rtf) Post by: anwar on May 01, 2011, 02:24:27 PM all you need is a rx battery,starter and fuel to get airborn, this heli has had about 3 hours of flight on it,and my price is Rs 43,000 and shipping at actuals Price quote from initial post. Title: Re: thunder tiger raptor 30v2 nitro helicopter (rtf) Post by: makntos on May 01, 2011, 07:38:30 PM price is the same
|