Title: [New Release] 450 Heli Combo at RcHobbyAddict.com Post by: anam_funny on June 08, 2011, 01:52:50 AM Hello All,
www.RcHobbyAddict.com has launched a combo for 450 Size Electric Helis. Price: Rs4450 Please let me know what you think about the price and the individual items included. Product Page: http://rchobbyaddict.com/product_info.php?products_id=157 List of items included with specifications: Includes: 3 x HXT900 9g / 1.6kg / .12sec Micro Servo 1 x Turnigy 450 H2218 Brushless outrunner 3550KV 1 x TowerPro H40A Brushless Speed Controller 1 x Turnigy MG90S Metal Gear Servo 1.8kg / 13.4g / 0.10sec 1 x HK401B AVCS Digital Head Lock Gyro 1 x Turnigy 2200mAh 3S 20C Lipo Pack 1 x XT60 Male Plug 1 x 3.5mm 3 wire Bullet Connector for Brushless Motor 1 x HK450 size Pinion Gear 3.17mm/11T (Align part # HZ052) Specifications for "HXT900": Size: 21x12x22 mm / 0.74x0.42x0.78 in Voltage: 3v ~ 6v Weight: 9g / 0.32oz Speed: 0.12 sec/60(4.8V) Torque: 1.6 kg-cm Working Temp: -30C~60C Teflon Bushing, 15cm wire, coreless motor Servo arms & screw included Specifications for "Turnigy 450 H2218 Brushless outrunner": Turns: 3.5 Cells: 2~3S Kv: 3550rpm/V No load Current: 4.7A/10V Max power: 500W Weight: 67g Dimensions: 27.2 x 36.5mm Specifications for "TowerPro H40A Brushless Speed Controller ": Amp rating: 40A Burst Rate (15sec): 50A BEC Current: 1.5A Voltage: 7.4-11.1V (2-3 cell Lipo/5-10 NiMH,NiCd) Dimensions: 70x31x11mm Weight: 47g Specifications for "Turnigy MG90S Metal Gear Servo": Weight: 13.4g Dimension: 22.8*12.2*28.5mm Stall torque: 1.8kg/cm (4.8V) - 2.2kg/cm (6.0V) Operating speed: 0.10sec/60degree(4.8v) - 0.08sec/60degree(6.0V) Operating voltage: 4.8-6.0V Temperature range: 0- 55deg Servo Plug: JR (Fits JR and Futaba) Specifications for "HK401B AVCS Digital Head Lock Gyro": Digital proportional RIC system Operating voltage: 4.8V ~6V( common for receiver) Operating temperature: -lOL r-.rf-45 C Dimensions: 28x26x20 mm Operating current: 80mA Specifications for "Turnigy 2200mAh 3S 20C Lipo Pack": Minimum Capacity: 2200mAh (True 100% Capacity) Configuration: 3S1P / 11.1v / 3Cell Constant Discharge: 20C Peak Discharge (10sec): 30C Pack Weight: 185g Pack Size: 103 x 33 x 24mm Charge Plug: JST-XH Discharge Plug: XT60 Title: Re: [New Release] 450 Heli Combo at RcHobbyAddict.com Post by: AEROVISHWA on June 08, 2011, 09:25:45 AM the combo is superb...!! :hatsoff: :hatsoff:
just let us what we will be requiring in addition to the heli and these parts to get it up in air...?? :salute: :salute: :salute: Title: Re: [New Release] 450 Heli Combo at RcHobbyAddict.com Post by: asinghatiya on June 08, 2011, 09:37:40 AM I guess you need a Helicopter & Radio
Title: Re: [New Release] 450 Heli Combo at RcHobbyAddict.com Post by: anam_funny on June 08, 2011, 09:37:56 AM Nothing... Just a heli kit... :):)
If you are a complete beginner, then the following will be required: 1pcs of 1.5mm Hex Screwdriver 1pcs of 2.0mm Hex Screwdriver 1pcs of #1 philips screw driver 1pcs of "BLUE" Thread Lock 1pcs of Lipo Charger 1pcs of 6Ch radio 1pcs of 450 Size Heli Kit, which can be found here: http://rchobbyaddict.com/product_info.php?cPath=49&products_id=127 Title: Re: [New Release] 450 Heli Combo at RcHobbyAddict.com Post by: anwar on June 08, 2011, 12:22:11 PM I am not sure if you refer to the "red" threadlock as the color of the liquid itself, OR the bottle. But "red" loctite (color of the liquid) is typically permanent, and not recommended for such builds. The "blue" colored or semi-permanent ones are the recommended ones. If you use the permanent one, you are in for long hours if you ever have to do crash repair etc.
Title: Re: [New Release] 450 Heli Combo at RcHobbyAddict.com Post by: anam_funny on June 08, 2011, 01:03:26 PM I was refering to the colour of the liquid. Oh. Ohk. I have always used green... Sorry for that. I will correct that.
|