Hello Aeromodellers !!
 
I have the following items for sale
reason : Had a workshop , ordered extra
All the items are ordered through DHL and Speed Post  , hence prices may be a bit more
All the items are brand new and sealed.
All the prices are in INR
An invoice will be sent along with the shipment.

1)   ESC - FLY PRO Seires 25A 2-4S Brushless Speed Control
      Cost per piece - 700
      Quantity Available - 3
      Shipping - 50

2)   Motor - 1000KV Outrunner Brushless Motors W/ Prop adapter Type A2212/13
      Dimensions:27.5x30 mm
      Shaft diameter: 3.17 mm
      Weight:47 g
      Thrust : 1200gms
      
      Cost per piece - 750
      Quantity Available - 3
      Shipping - 50
      

3)   Servo - CORONA 12.5g/ 2.5kg/ .14 sec Metal Gear Micro Servo
      Size:   22.5X11.5X24.6mm(0.88"x0.45"x0.96")
      Weight:   12.5g
      Operating voltage:   4.8V~6.0V
      Operating speed:   0.14sec/60º
      Stall torque:   2.5kg.cm
      Gear Material:   Metal
      Connector wire length:   215mm
      Temperature:   -20℃～+60℃

      Cost per piece - 450
      Quantity Available - 8
      Shipping - 50

4)   Charger - Turnigy 2S 3S Balance Charger. Direct 110/240v Input
      This charger is better then the iMax Pro according to my personal experience.
      got a full lot of 25 iMax Pro chargers which were not working.

      Cost per piece - 850
      Quantity Available - 4
      Shipping - 50

5)    Battery - ZIPPY Compact 1800mAh 3S 25C Lipo Pack
       These LiPos are really very slim and compact at the same time very efficient.
       Weight: 134g (including wire, plug & case)
       Dimensions: 106x17x34mm
       Balance Plug: JST-XH
       Discharge Plug: XT60
      
       Cost per piece - 900
       Quantity Available -3
       Shipping - 50

Hello respected modeller,could you please post the actual pics,individually,of the items you wish to sell. And please confirm that they are brand new and in unused condition.

Thanks for the reply.

The items are brand new, packed and absolutely unused.

I will upload the individual pics in a few minutes.

Individual Pics

will post the charger's pic in the evening today

Varun, will you sell the LiPoly battery of 1800 mAh, from Zippy as one..? if so tell me.. i need one battery at present.. 

Definitely you can get what ever quantity you want.

Plz Check your PM.

Varun..thanks for your great mind..will deposit money by tomorrow.. as you mentioned.. so, reserve one battery for me.. and i mailed you personally my address to you.. thank you..

One LiPo reserved for Mr. Roopkrishna,
thank you.

 Battery - ZIPPY Compact 1800mAh 3S 25C Lipo Pack
       These LiPos are really very slim and compact at the same time very efficient.
       Weight: 134g (including wire, plug & case)
       Dimensions: 106x17x34mm
       Balance Plug: JST-XH
       Discharge Plug: XT60
       
       Cost per piece - 900
       Quantity Available -'2'
       Shipping - 50

Mr roopeshkrishna , The battery is packed and ready to ship

thank you..

Status :

Motor    - Available 3
ESC      - Available 3
Servo    - Available 8
Balance Charger - Available 4
LiPo - Available 2 , 1 reserved for Mr. Roopeshkrishna

hi
i need a lipo and a charger for traxxas slash 4x4,just buyed a new one.its still in a stock condition,as i dont knw the lipo ur giving will work or nt,so plz confirm will it work,if nt which lipo will do,and tell me bout d charger also,will it charge all kind of batteries and in how much time.if ur stuff will b ok for my use then i need one charger and one lipo

wating for ur reply

thanks a lot 

The LiPos are working good...I have used them myself. The charger is also very good , we have been using it for 3 years...You can buy this set they both are really nice...Lemme know if you need them...Thanks for your interest..

as i allready told u tht i need the lipo,but i dont knw will it work with my slash 4x4,

Hi mkmkmk !

The LiPos which we have are of 1800mAh and 11.1V which is a 3 Cell battery.
I am uploading an image of the power specs of the Traxxas Slash 4 x 4. It depends on the skill level and the size of pinion and spur gear.
Hence It will work in your Slash 4 x 4 (Depending upon the gear set you have)just that it wont give you much juice , that is your run time will be less.
The Balance charger which we have is not a digital charger . It can charge 2cell and 3cell LiPo.

i understood wht u said thanks for ur explanation,my car is in stock condition till nw,nt a single thing has been change,i want a battery with run time atleast half an hour,and d charger for it should charge the battery within an hour,i knw thr r thing in market,but i dont hav ne idea,so as in start i atleast need 2s lipo/7.4v,,4000+Mah or 5000+Mah

 

these lipos will puff up if used in slash, coz each battery can safely kick out 45 amps , but ur slash will pull way more than that, so ur best option in this case would be to either buy other bigger packs or buy 2 batteries that varun is selling and connect them in parallel and then use it

Following stuff for sale :

1)   ESC - FLY PRO Seires 25A 2-4S Brushless Speed Control
      Cost per piece - 700
      Quantity Available - 3
      Shipping - 50

2)   Motor - 1000KV Outrunner Brushless Motors W/ Prop adapter Type A2212/13
      Dimensions:27.5x30 mm
      Shaft diameter: 3.17 mm
      Weight:47 g
      Thrust : 1200gms
     
      Cost per piece - 750
      Quantity Available - 3
      Shipping - 50
     

3)   Servo - CORONA 12.5g/ 2.5kg/ .14 sec Metal Gear Micro Servo
      Size:   22.5X11.5X24.6mm(0.88"x0.45"x0.96")
      Weight:   12.5g
      Operating voltage:   4.8V~6.0V
      Operating speed:   0.14sec/60º
      Stall torque:   2.5kg.cm
      Gear Material:   Metal
      Connector wire length:   215mm
      Temperature:   -20℃～+60℃

      Cost per piece - 450
      Quantity Available - 8
      Shipping - 50

4)   Charger - Turnigy 2S 3S Balance Charger. Direct 110/240v Input
      This charger is better then the iMax Pro according to my personal experience.
      got a full lot of 25 iMax Pro chargers which were not working.

      Cost per piece - 850
      Quantity Available - 4
      Shipping - 50

5)    Battery - ZIPPY Compact 1800mAh 3S 25C Lipo Pack
       These LiPos are really very slim and compact at the same time very efficient.
       Weight: 134g (including wire, plug & case)
       Dimensions: 106x17x34mm
       Balance Plug: JST-XH
       Discharge Plug: XT60
       
       Cost per piece - 900
       Quantity Available -2
       Shipping - 50

Hplz quote final price  of charger

Shauviks, Kindly check your PM inbox..

Hello Roopeshkrishna Sir !

Your battery has been shipped by DTDC.
Kindly check the attached receipt for tracking info.

Thank You

check ur pm

a million thanks Varun.. 

Motor-1
ESC-1
Charger-1
LiPo Battery-1
Servos-3

Reserved for Mr Amit.

@varungarg funds transferred to your bank account.

Varun..reached bank..but was holiday..   so, by tomorrow will deposit..

Hey Shauvik buddy !!
I have attached the dtdc receipt
sorry for attaching late .. was in college for project work n didn hv net access

Thanks

thanx a lot varun!!!!!!!!!!!

Hello Amitji

I have attached the DTDC receipt.
Kindly check it.

Thank You

REVISED AVAILABILITY OF ITEMS.
I have the following items for sale
reason : Had a workshop , ordered extra
All the items are ordered through DHL and Speed Post  , hence prices may be a bit more
All the items are brand new and sealed.
All the prices are in INR
An invoice will be sent along with the shipment.

1)   ESC - FLY PRO Seires 25A 2-4S Brushless Speed Control
      Cost per piece - 700
      Quantity Available - 2
     

2)   Motor - 1000KV Outrunner Brushless Motors W/ Prop adapter Type A2212/13
      Dimensions:27.5x30 mm
      Shaft diameter: 3.17 mm
      Weight:47 g
      Thrust : 1200gms
     
      Cost per piece - 750
      Quantity Available - 2

3)   Servo - CORONA 12.5g/ 2.5kg/ .14 sec Metal Gear Micro Servo
      Size:   22.5X11.5X24.6mm(0.88"x0.45"x0.96")
      Weight:   12.5g
      Operating voltage:   4.8V~6.0V
      Operating speed:   0.14sec/60º
      Stall torque:   2.5kg.cm
      Gear Material:   Metal
      Connector wire length:   215mm
      Temperature:   -20℃～+60℃

      Cost per piece - 450
      Quantity Available - 5
     

4)   Charger - Turnigy 2S 3S Balance Charger. Direct 110/240v Input
      This charger is better then the iMax Pro according to my personal experience.
      got a full lot of 25 iMax Pro chargers which were not working.

      Cost per piece - 850
      Quantity Available - 2
     

5)    Battery - ZIPPY Compact 1800mAh 3S 25C Lipo Pack
       These LiPos are really very slim and compact at the same time very efficient.
       Weight: 134g (including wire, plug & case)
       Dimensions: 106x17x34mm
       Balance Plug: JST-XH
       Discharge Plug: XT60
       Cost per piece - 900
       Quantity Available -1
       

Thanks Varun !!

Intrested in 2212/13 motor. send link of motor and ware did you buy it

Quick stock update :

1-ESC,1-Motor,3-Servos,1-Charger,1-LiPo booked for Mr. Manik

Remaining Stock :

ESC     - 1
Motor   - 1
Servos  - 2
Charger - 1

Received the package very fast and in excellent packing. Thanks a lot Varun.

Hi Varun , Please give the specifications of the motor or link.

Thanks alot Mr. Amit for appreciating . All the best for your model !! 

Got more stuff for SALE

REDUCED PRICES :

1)   ESC - FLY PRO Seires 25A 2-4S Brushless Speed Control
      Cost per piece - 650  Rs + shipping
      Quantity Available - 8
     

2)   Motor - 1000KV Outrunner Brushless Motors W/ Prop adapter Type A2212/13
      Dimensions:27.5x30 mm
      Shaft diameter: 3.17 mm
      Weight:47 g
      Thrust : 1200gms
     
      Cost per piece - 700 + shipping
      Quantity Available - 8

3)   Charger - Turnigy 2S 3S Balance Charger. Direct 110/240v Input
      This charger is better then the iMax Pro according to my personal experience.
      got a full lot of 25 iMax Pro chargers which were not working.

      Cost per piece - 750 + shipping
      Quantity Available - 6
     

4)    Battery - ZIPPY Compact 1800mAh 3S 25C Lipo Pack
       These LiPos are really very slim and compact at the same time very efficient.
       Weight: 134g (including wire, plug & case)
       Dimensions: 106x17x34mm
       Balance Plug: JST-XH
       Discharge Plug: XT60
       
       Cost per piece - 900 + shipping
       Quantity Available -5

5)   CORONA 12.5g/ 2.5kg/ .14 sec Metal Gear Micro Servo
      Size:   22.5X11.5X24.6mm(0.88"x0.45"x0.96")
      Weight:   12.5g
      Operating voltage:   4.8V~6.0V
      Operating speed:   0.14sec/60º
      Stall torque:   2.5kg.cm
      Gear Material:   Metal
      Connector wire length:   215mm
     
      Available Qty : 25
      Old price : 450 Rs.
      New Reduced price : 390 Rs.

Varun, do you still have the motors? If yes please keep four motors for me.

Wat all size props do u have???

@ SunLikeStar
 
4 Motors booked for you. 

Thanks Varun, will collect when we meet next time
Please send me your bank account details.

Thank You Amit Bro !!
Will pm you the bank details .

could u post pic of motor and ESC....

Is the ESC & Motor put up for sale are matched?

Does motor comes with motor mount, connectors?

Which Prop preferred and is it available with you ?

@rastsaurabh

Thanks for your Interest !!

The motor and esc are perfectly matched.
We have made more than 30 models with this combo.
Both, the motor and esc do not get hot.

this combo can be used with 9 x 5 and 10 x 4.7 props depending if you want to make slow flyer or not.
I have both the props in very limited qty.

The motor comes with X mount and prop adapter.
I have 3.5mm gold connectors,XT60,T connector and prop saver.
I can solder both the motor and esc with connectors if you want.

Quick stock update :

All  the LiPos are sold out.
4 Motors reserved for SunLikeStar.

Remaining items :

22 Servos
4 motors
6 ESC
6 Chargers

2 motors , 2 ESC , 2 chargers and 10 servos reserved for sbajare.

Remaining items :

12 Servos
2 motors
4 ESC
4 chargers

Varun.. a million thanks for this battery, with excellent endurance and performance..for the great price..

Varun can you please block four esc's for me, i'll confirm tomorrow if I need them or not.

Hi Amit bro ! 4 ESCs blocked for you . You can confirm tomorrow .

Please book one motor for me and if you have, 2 9x5 propellers. PM me your bank details.

Thanks!

Please book 1 ESC and 1charger for me.
Please let me know your bank account details.

thanks,
Aravind

Varun, I'm gonna need those ESCs; so its four motors and four escs. Will do the transfer as soon as I get your bank details.

Quick stock update :

4 ESC and 4 Motors booked for SunLikeStar(Confirmed)
1 ESC , 2 Motors , 10 servos and 2 chargers booked for sbajare(Awaiting final confirmation and payment)
If sbajare backs out then 1 motor booked for vishal and 1 ESC booked for Aravind.

Remaing items :

4 chargers
12 Servos

LiPos , Motors and ESC sold out.

Please book 4 corona servos for me.

Roopesh Sir,

Thank you so much for the appreciation !! 
Did you use the LiPo ?
If yes , how was the performace ?

@Ani
4 corona servos booked for you .
Only thing is will dtdc ship to port blair ?

Hi
DTDC ships to Andaman and India post is also reliable. I have not had any problems with India post so far.

need a charger for 2200 3c 11.1,  final price please.

Is the lipo still available?