RC India

On offer is a complete basic aeromodelling kit. Here is what the kit contains:

A. 21cm wingspan Micro Chuck Glider kit (pre cut parts)
B. 25cm wingspan Hunter Catapult / Chuck Glider kit (pre cut parts)
C. 40cm wingspan Yellow Bird / Follow Me / Magpie (all identical) Catapult Glider kit (pre cut parts)
D. 12 inch Stainless Steel scale
E. Basic modelling cutter/knife
F. 2 sheets of Sandpaper 80 and 100 / 120 grade
G. Quickfix Adhesive 15 ml tube
H. CA glue
I. Rubber Bands for Catapult
J. Wooden dowel rod for Catapult
K. Silk Ribbons for wing roots and dihedrals
L. Plasticene putty

All securely packed in a thick cardboard box measuring L 18 inches X W 6 inches X H 4 inches. Weight of each box 600 grams.

This kit is PERFECT for someone wishing to start off in this hobby or anyone wishing to conduct basic aeromodelling camps. I use the same kit for all my camps. I do not allow children, below the age of 12, to handle the Modelling Cutter, I give it to their guardians at the end of the day.

Price Rs. 500/- per unit + Actual DTDC Charges. If you have a preference for a different courier, please check with them and let me know the actual charges for the box dimensions and weight 600 grams shipped from Guwahati to your destination. We can work it out.

Some relevant details and photographs may be found here:

http://www.rcindia.org/for-sale/balsa-wood-gliders/

http://www.rcindia.org/for-sale/balsa-wood-gliders-ii/

Delivery Schedule: Goods will be despatched within 48 hours of receiving full payment.

Please do not offer to buy single/ individual gliders from this unit, I will not be able to entertain your offers. It is a 'package deal'. ;D Please PM me for further details.

Regards,

VC

Some indicative pictures:

Pic 1 and 2 - Magpie / Follow me / Yellow Bird - 40 Cms wingspan completed Glider

Pic 3 - Hunter 25Cms completed Glider

great work VC, you are a true Forum Hero ;D

Thanks WingCo, tried calling you yesterday but couldn't get through to your numbers.

 ..building chuck gliders, Almost finished Spit, Worked on CAP, repaired children's piper cub..de-inhibited two engines that's called productive day..not to mention 5 flight at sunrise in the golf course, None of this place has telephone or internet..;D

Wow! it's apity that nobdy seems interested in buying the kit detailed above. I had thought that Rs.500 for 3 Balsa Kits + All the accessories was a decent price.

steal deal, honestly..if you price it at 1500-2000 may be you will get attention..no jokes

what would be the price without the
1) both the gums
2)ruler
3)cutter

ah..one other thing, trying to add a spoiler (Bang Bang) for roll control with you permission , it will fail, there ain't enough lift for riff raff in the glider..but then...what the heck ;D

actully iam a bit interested and i have some questions about the gliders....should i ask them here at pm as you say Mr VC

VC, one more for me ..want to give it to the Vernacular school here.this very kit, if you gift wrap for me it will save me the effort  :bow:

Will do Wing Co. Will despatch by Tuesday.

Speedracer - Rs.450/- if you want to subtract the gums, cutter and straight edge (scale/ruler). If you have any further questions, please ask them here o an open forum.

i'll buy one and insted of quickfix please send some extra plasticine ....
PM me the payment details

thanks

Confirmed. Payment / my bank details will be PMed to you by Tuesday, Pl let me have your address by PM. Thanks for your business!

Kartick please note that courier charges (DTDC) will be charged extra, on actuals.

noted and you have a PM

Speedracer, WingCo, Your parcels have been despatched via DTDC. Will update you with the Tracking and other details via PM later this evening.

Cheers!

:salute:

done sir

ok sir

Wingco - gift wrapped and sent as ordered! Careful as you peel away the brown paper covering. DTDC Tracking No. K 45685869

Speedracer - Your parcel contains no glues or ruler or knife. Added extra plasticene.
DTDC Tracking No. K 45685870

CVJOY - PM sent. Hope you like it! It is a gift from me to you. Build it well and she will prove to be a delightful flyer.
DTDC Tracking No. K 45685868 :thumbsup:

Cheers!

Mr VC please pm me your shipping address and amount to be remitted

Gentlemen, please let me know once you receive the consignments.

Mr Vc i have received the package.
will open it tomorrow.

received and gifted, thanks Victor Charlie :salute:

Thanks all!

In response to a PM from Kartick @ Speedracer, I am attaching some old snaps for reference:



Query No.1 "What are the Silk Ribbons used for?" These pictures should be self explanatory.

Query No. 2 "What are the small wooden sticks used for?" They are used for increasing the contact area between the wing roots and the fuselage. Also for providing the correct angle to the main wings.

Perceived confusion between "Airfoil / Aerofoil" shape and "Dihedral"

can you post the pics of catapult also???

First make the Gliders and then we can make the catapult in 10 seconds flat! ;D

VC, school children are happy, they are thinking i cut them and designed them, told them it is victor charlie uncle. :thumbsup:

Thanks WingCo - the thought makes me happy.

VC sir my 21cm wingspan Micro Chuck Glider is complete

Pics attached

The last pic shows the thickness from tip to tail

Congrats! How does she fly? I see that you made a nice catapult too! Sending you a PM shortly. Hope you got my earlier sms.

i didnt recieved any sms today please sent the same via pm....

I have just tried to glide it in my room will go to ground tomorrow...

tried offsetting the fin to make her turn around, with little success  >:( ;)

On which model?

If your chuck glider does not respond to rudder - its cg is usually too far forward

Chuck gliders usually respond better to a little up aileron - way to do this
is put some nitrocullose glue (quickfix or similar) on the trailing edge tip of the
desired wing. The trailing  edge will curl towards the glue as it dries - do a
little at a time as its very effective.

:salute:

hey is it still available??

Yes stocks are available.

Mr VC I have some issues with the quality of hunter glider

Sorry but it wasn't possible for me to check each and every kit as they were sealed packets. If it can't be repaired, please send it back to me and I will replace it with a fresh piece. However, I take no guarantee for breakages in transit. I will try my best to wrap it in stiff cardboard and thermocole/bubble wrap.

Its already repaired
it'll work . i jus posted it to let you know the quality.
and I'll remit the amount today.

Thanks! I will take up the matter with the supplier and check the stocks immediately.

VC, you are responsible for children getting less marks in this exams, they are going crazy chucking gliders all o'er. Cartoon TV people are gunning for you, as you caused some TRP issues i guess. beware

Yay!!! That's exactly what I want to do - glean them away from the Idiot Box and the I Pod and Orkut / Facebook virtual reality.

Magpie/follow me glider is complete.

There seems to be a problem with the tail plane. Have you sanded the leading and trailing edges a bit too much? She is a beautiful flyer and this may spoil her flight characteristics. Check the picture of my glider in the earlier page of this thread.

For all beginners, the Magpie / Follow me is an accomplished design and can be assembled and flown with virtually no sanding at all. Even if you don't create an aerofoil shape and assemble the wings just as they are, she will still fly well. Just a light sanding to remove the roughness from the surfaces of all components is good enough.

yes while sanding one part of the tail broke off
so i just trimmed it.
can you post the build procedure for hunter glider.
i like the hunter too much and don't want to spoil it .
so a built\ assembly procedure will be really helpful.

yes while sanding one part of the tail broke off
so i just trimmed it.
can you post the build procedure for hunter glider.
i like the hunter too much and don't want to spoil it .
so a built\ assembly procedure will be really helpful.

Never ever 'trim' or cut away a part arbitrarily. What you should have done was joined it back with Quickfix, dried it for 8 to 10 hours and then sanded it flat. However, what is done, is done. Seeing the shape of your tailplane all I can suggest is this - Try flying her, if she nose dives, remove some weight from the nose. If all else fails, break away the tailplane and carve a new piece, using the plan supplied along with the kit, out of thin cardboard (visiting card material).

I am sorry, I don't have a Hunter build log. Let me see what I can do, if time permits. My Griffon 8100 Hovercraft build is killing me.

ok sir

Hey speedracer what information do you need?

I am confused about how to attach the wings as the cavity in the fuse is LONGER than the wings.

Well my glider kit had the cavity larger than the wing chord at root :)

Well you can either trim the wing to form a protrusion kinda thing which can fit into the slot or increase the cavity size. Either of the above requires same amount of accuracy i guess. I would suggest the latter as it will allow for a larger area of contact between the wing and the fuse for glueing.

Apart from the above problem make sure you sand the wing parts, join the two wing sections with the necessary dihedral then slide it into the slot and glue the wing to the fuse. So make sure the wing can slide into the cavity easily before glueing itself else sand wing/cavity appropriatly.

This link is for a normal glider. Hope it helps:
http://www.rcindia.org/beginners-zone/chuck-glider-build-log/

thankyou it'll do

If you are looking at the glider doing short flights and loops, slide the wing assembly to the front edge and then glue it. If you are looking at longer straight flights, slide the wing assembly to the rear and then glue it. I prefer the latter in the Hunter.

thats a really good tip thanks.

VC how does that help decide the duration/loops?

Is it because the glider becomes tail heavy when wing is shifted front - loops related?

I don't think that could cd the reason. when we shift the wings forward the plane should become nose heavy

I notice that there are a lot of 'guests' who are viewing this thread with a lot of interest. Come on Ladies and Gentlemen, log in to this community and we can talk business. I could disclose my email id and then you could contact me without being a member of RCINDIA.ORG - But then you will miss all the fun! It's a great community if you are REALLY interested in Aero / Heli / / Ship / Boat / Car/ Hovercraft / Train modelling and RC stuff. Come on - join up!

Sorry guys, I'm not thinking straight now with CA glue all over my right hand and styrofoam dust all over my face!!! Perhaps it has to do with the shifting of the CG.

Mr VC  both the gliders are flying great.
will try to post a video tomorrow.

Sir i have a suggestion regarding the kit
you should include two full sheets of sandpaper as only 4 strips are not enough.
 or 12 strips that is 2 strips each of both the sandpapers .
also i would like to share my new purchase a catapult.

Two full strips are included in the original box. You wanted some items to be removed and adjusted, that is what probably created the confusion. My assistant must have messed up. My apologies.

What i ment to say is that 12 strips of that length should be included
i bought 1sheet of each of 80 no ,120 no and 400 no  for Rs35 that is what all required.

my hunter glider is complete

Congrats!

BTW, in post no. 67, when I said "Two full strips are included in the original box", I actually meant "two full sheets" as shown in the picture. Also please see the first post in this thread.

Thanks.

ok sir

my home made knuckle dusters

my home made knuckle dusters

How is this connected to Balsa gliders OR RC?

??? :o

Its just for fun
please see the album to know how it is related to wood

http://www.flickr.com/photos/59226892@N07/5425575810/

Incidentally, you could get arrested for posting that picture on a public forum. If I am not mistaken, a knuckle duster is deemed an 'illegal weapon' in India and most parts of the world.

I am not the Administrator or the Moderator, but may I take the liberty of requesting you not to contaminate the continuity of a thread by posting such entries here?

If the authorities permit, please post it under 'Chatter Zone', I guess.

Cheers!

Its illegal if i use it for fighting someone. here its just a show piece made up of light aluminium.
Barely a piece for showing !!!!!


Request to mod/ admin please delete if found offensive or split it , thanks

Hello


I am a newbie , these are intended for my 10yr old son would these be appropriate hes made one glider in his robotics club from some plastic type of sheets was sad when he lost it to a tree. I'd like to encourage him into building these i'll help of course but will need details, if you can include the directions i'd be happy to buy these. thanks, pls send your phone no, so that i can order.

anusri
you want to give your 10 year old ,knuckle dusters ? ???

PS
Welcome, speed racer flirted with danger sometime ago, he doesn't do it anymore. it is not about gliders.

Anusri, sorry the gliders are not available now.

You may get from
www.rcbharat.com
http://www.rcbharat.com/gliders/23-magpie-follow-me.html

Thanks

Hi

I am looking for a ship modelling kit which I can build on my own.

Please let me know with details, if you have one.

Regards,
Abhilash..

Dear VC,

as we talked some time before I want this kit that is with subject and without any more question.

Regards,

hemal

Excuse me?

Dear VC Sir,

We have talked some days before on chuck glider purchase. but due to followon buyer we were unbale to complete that puchase.

I Hemal from Surat, Gujarat that even called you some 2-3 months back.

Regards,

Hemal Dalal

As I had informed you then, the supplier is not interested in selling single units. He will supply only bulk orders of 20 pcs or more.

Regards.