Specifications:
- 4.3 inch color TFT LCD display monitor
- 960 x 468 pixels resolution (4:3)
- System: PAL/ NTSC auto switch
- Compatible with most cameras
- Power source: 12V DC (requires professional installation) , You can use 3s Lipo [11.1v]
- English user manual included

FAULTY - You Must need to Repair it for working..[Minor Problem]

Actually it works when we are Testing it but at now i think some Fault in Wire or Somewhere..
I do not know...

SO if anyone need to buy this FPV TFT LCD Screen Than contact us...

Cost is - 1200/-
FREE SHipping..

Check here -
http://www.rcproduct.in/fpv-camera-monitor-audio-video-txrx/59-3-tft-lcd-digital-monitor-for-fpv-ntscpal-12v-dc.html

what is the fault , ? please mention that ,

i dont know..

it works one day before when i tested...
but on second day..LCD is not start.

One should know the problem in this display, otherwise no one can buy blindly.
If you don't know the problem, then how you mentioned its a minor problem?

If the display is not working then the problem might be with the Display Strip. Generally a faulty Display Strip results in a dead display. This prob needs an expert to be diagnosed. But still u can check up with the display strip if its easily reachable.

It seems either display IC is blown up or display strip is damaged. Is it heating up on supplying power? Might be some problem with power supply. Those small SMD components inside could also be blown up. I think you should go to a electronic repair shop(dealing with television, CD/DVD players, etc) Hopefully they people would repair it. And won't charge you much(depending on the fault)

 

Yes utkarsh sir ur rite it might be the prob but he needs an expert to deal with it.

No "Sir"....
It just needs some repairing and it would be absolutely fine...

I will post Some Snap Of PCB so i think someone can check the parts..
bcoz nothing is burn On the PCB..

@admin is it not with this post on forum we are encouraging people come and sell defective/wear out products. I know people had sold stuffs here which were burned out/ broken but mostly those are at throw away prices. And i think at most this lcd would have cost rupees rs 1500-1800 max, so 1200 is still inappropriate since seller is not giving any solution to fix it.

Anyways seller can ignore my post as it has nothing to do with buying this broken lcd.

Who says Broken LCD..

I do not know what is the problem in LCD..so how can i tell you...

It works on 1st time but 2nd time i connect all things..at that time not working..

so how can i know the problem...