RC India

Hey everyone! I'm selling all my RC and robotics stuff (that hasn't already been sold locally).
Reason for sale: Found another hobby!  ;)

Here's the list:

1) 4 x DT 750 kv motors | tested once, excellent for quads and big planes| 
 :Rs: 2000 for the complete set of 4

2) 1 x E-max CF-2822 BLDC + prop saver | used | 
:Rs: 400 total 

3) 2 x DYS brushless ESC 30A | used | 
 :Rs: 500 each

4) 1 x 12V 12000 RPM brushed motor + 1000 V capacitor | used in hovercraft after proper break-in|
 :Rs: 300

5) 2 x Turnigy brushed ESC 30A | tested once|
 :Rs: 400 each

6) 3 x 7*6E props | in unopened packs |
 :Rs: 100 total

7) 2 x 9V 8000 RPM brushed motors with props |used, excellent for mini hovercraft/ boat|
 :Rs: 200 total

8] RCH Quad frame | unused |
 :Rs: 500

--------- Robotics stuff ---------

9) 2 x 12V 200 RPM High Torque (32Kgcm) DC Geared Motor + homemade clamps |used|
http://robokits.co.in/shop/index.php?main_page=product_info&cPath=2&products_id=275
 :Rs: 600 each

10) 500 Rpm side shaft motor + steel motor mounts | used |
 :Rs: 600 total

NOTE :

1) Shipping extra.
2) 'total' means price for the set. The items won't be sold individually.
3) Please make orders above  :Rs: 500
4) Prices will be reduced for large orders.
5) All brushed motors have 1000V ceramic capacitors soldered on leads.

More pics...

And more...

4 x DT 750 kv motors
Book for me send me your bank details..

The pics have been re-sized and edited. The dt 750 motors are much bigger than they look in the pics. Same goes for the rest of the stuff.

Hey Satya! Booked the 4 x DT 750 kv motors for you!
They didn't come with nuts. I've added them. Also soldered bullet connectors on 2 of them...
Sending you bank details in a bit...

Quad frame dimensions pls.

Also please book the 3 7X6 E Props for me.

check PM

Booked quad frame for AEROVISHWA.
 
Booked props for VC sir.

After receiving your PM, I am sorry that I am not interested any more.

If satyagupta is not intrested book.. 4 X DT 750 for me

Faisal, I'll let you know at the earliest if Satya is not interested.

Vish, I'll send you the quad frame (wrapped in bubble-wrap) in a sturdy plastic box at the same cost we discussed! Hope you'll be able to make most out of it!

payment made.... u will recieve it  in short time...or by tomo morn.....

BTW where did u buy  the frame  from...and the dimensions..! any link will be better

Hey, I am shocked.

You have blessing with this hobby unlike other from GOD and it is proven. Please don't leave this hobby.

All we are waiting for your return.

The correct torque rating for the "200 RPM High Torque (32Kgcm) DC Geared Motor" would be around 10kgf-cm and they can be had for 500 bucks new from vegarobokit. I have used these motors so I just wanted to point out, hope the seller does not mind. :P

Checked account at ATM twice this morning, didn't receive payment.

The frame's from rchobbyaddict.com (Anam). Here's the link:

http://www.rcindia.org/for-sale/(new-release)-quad-frame-rchobbyaddict-com/

Thanks man, I don't like the prices of robokits.co.in either! Vegarobokits, too, is costlier as compared to some new shops.
I'll give them motors away to some juniors if nobody here buys them!

edit: Just checked the prices on a couple of sites, mostly :Rs: 500. I'll drop the price to :Rs: 400 each for those motors...

Thank you so much for your kind words, Kalyan da!  :hatsoff:
This is just a temporary leave as I can't invest properly in the hobby right now! I'll surely be back the moment I start earning the big bucks!  :)
I'll still be visiting and posting on our RCI. There's so much to learn from and share with all the amazing people here!  :)

Swapnil you are my Mentor-in-Chief bro, its sad not seeing you around these days...busy in studies?  :hatsoff:

Thanks so much Amit! How's your airplane build going?
Yes, I'm quite busy with studies and other stuff (  ;) :P ) right now.
I've successfully built and flown an airplane...which was my childhood dream. So now my priorities have shifted a bit. I'm sure I'll be back with a bang here soon!
 

Swapnil, on the building front everything is going good, built 2nd scratch built plane which was slightly underpowered, crashed on maiden flight  8-), adding more powerful power setup in that. Got a GWS Slow Stick also from Lance. On the flying part still struggling, have not flown solo till now. But all in all I am enjoying. Looking forward to my first successful landing....  {:)} Hope to see you around ...and what is that other stuff.....   ;)

I know this is a bit off topic but Swapnil can you please provide some more info on the "new shops" you mentioned please!
Thanks!

By new, I meant shops that came after robokits.co.in like robosoftsystems, nexrobotics, rhydolabz, embeddedmarket etc.

Item '1' sold and shipped to Satya.
Item '8' sold and shipped to Vish.

Cheers guys!   

Thanks buddy, track id??? and shipped using??

Satya, PMed you the details...

Robotics motors sold locally, only items 2, 3, 4, 5 and 6 left now!

thanks swapnil

C'mon guys get this stuff off my hands or I might get tempted again!  :P

Here are 2 new deals:

1) E-max CF-2822 BLDC + prop saver + DYS 30A ESC + 3 x 7*6 props
 :Rs: 900 + shipping

2) 12V 12000 RPM brushed motor + Turnigy brushed ESC 30A
 :Rs: 600 + shipping

If someone orders this today I'll also include some freebies (simulator-pack DVD, connectors...) as it's my B'day today!

Oh teriiiii Happy Birthday bro.. {:)} {:)} {:)} {:)} {:)}

 {:)} {:)} Very Happy Birthday Swapnil  {:)} {:)}

many more happy returns of the day  :) :) :) :) :)

Thank you guys! It's been an awesome day so far!  :bow:  ;D

happy birthday bro....nd plz uploadpics

Thanks man!
This is the 2nd Page of the sale thread, all pics are on the 1st page.

hi swapnil
im interested in buying sum stuff from u...plz send me ur contact details or call me at 9970079728 .
i also stay in nagpur i can meet u personally...
thnks

Hi Manish, what 'stuff' do you want to buy?

Interested in turnigy brushed 30A ESC.
can I use in RC Plane ?
If Yes, then book for me.
PM me about shipping..to pincode 395009.

heu swapnil

What's that supposed to mean? Sorry Manish, I don't understand SMS English...

@runik4: Sorry mate I forgot to update, but all the brushed stuff has been sold locally.

Now only the following setup is left:

E-max CF-2822 BLDC + prop saver + DYS 30A ESC + 3 x 7*6 props
 :Rs: 900 + shipping

Thanks bro got my stuff yesterday in well intact and as it mentioned condition thanks a bunch :thumbsup: :thumbsup: :thumbsup:

Relieved now! Good luck with your quad build! :)

received the package today...! thanks boss...!

Yay!! Really happy everyone got their stuff properly!  ;D

Time to cut this thread, thank you guys!