|
Title: Cheap AnyCopter Frames and Kits (Quad kits Under Rs.375) Post by: yashodhanp on March 18, 2014, 09:50:50 PM Hey guys,
I got some centre plates laser cut, that can be used to make all kinds of multirotors. (Tri, quad, hex and octacopters) based of the RotorBones Anycopter hub kit. Pics attached. Each set of centre plates will cost Rs. 90 + Rs. 70 (Flat rate S&H via EMS Pan-India upto 3 sets) (Discounts available for shipping beyond that. P.M. for further details) Each set includes the laser cut centre plates ONLY(Top & Bottom Plate, Battery Mount and Boom Drilling Templates) Booms and Other hardware NOT included. The hub has been designed to use 1/2" booms. Each set will come with a small sheet of paper with photos on the different types of setup possible. Update: 1/2" Aluminium Booms can be included in the kit @ Rs. 1.5 per inch for custom sizes (kindly specify the size you wish your booms to be :) (nominal handling fee of Rs. 30 will be added to the final amount(discounts available for larger orders) ) or Rs. 15 for a standard 12" boom, undrilled( Hardware Pack Constituting of 18 Stainless Steel M3 x 25 Philips head screws and 18 Regular Nuts also available @ Rs. 90 (No additional shipping charges for it) Thus total kit can cost as little as Rs. 240 plus shipping for a standard Quad and slightly higher for other variants ;D N.B.: Actual hub kit from RotorBones costs $14 which is roughly Rs. 830 :o Regards Yashodhan Title: Re: Anycopter Centre Plates @ Rs.90!! Post by: v2 eagle on March 19, 2014, 01:02:57 AM Is that possible for you to make a custom cut with design given,
also what material is this and how much load can this bear, Ashok.P Title: Re: Anycopter Centre Plates @ Rs.90!! Post by: yashodhanp on March 19, 2014, 11:51:09 AM Bump.
@ashok, the material used is 2.5mm pine HDF. It can support a good amount of load and will be stronger once booms are attached :D, certainly your own designs can be cut as well Title: Re: Cheap AnyCopter Frames and Kits Post by: VC on March 19, 2014, 04:15:25 PM Yash, one complete set for a Hexa that will measure 36" from spinner tip to spinner tip. Let me have a quote on this please. Inclusive of 6 aluminium booms, screws and nuts, centre plates etc. Would prefer to have the booms drilled for fitting. Also will need 6 smaller circles of 1.5" dia to be drilled and screw fitted at the tip of every boom (as motor mounts).
Thanks. Title: Re: Cheap AnyCopter Frames and Kits (Quad kits Under Rs.300) Post by: yashodhanp on March 19, 2014, 04:43:26 PM A 36" MtM hex with all that you have asked for would cost you Rs 425+ 100 S&H
The Kit will include: 1. Centre Plates x 1 2. 18" x 1/2" Booms x 6 (predrilled for the centre plates, pls drill motor mounts yourself as per your requirements) 3. 1.5" discs for motor mounts x 6 4. The Hardware pack consisting of 18 M3 Screws and Nuts. (Not enough for motor mounts and motors) Additional hardware available at extra (special) cost of Rs. 80 for additional sets of screws (18 of each) Title: Re: Cheap AnyCopter Frames and Kits (Quad kits Under Rs.300) Post by: VC on March 19, 2014, 04:50:29 PM What is the dia of the centre plate and what length of the 18" boom will be bolted above/below it? I am trying to reach 36" tip to tip, therefore if the centre plate has a 6" dia and 2" of the boom is screwed in then I am left with 16" + 6" + 16" = 38" tip to tip measurements. That suits me fine as I plan on using 10" props.
All else that you have quoted is PERFECT! Title: Re: Cheap AnyCopter Frames and Kits (Quad kits Under Rs.300) Post by: yashodhanp on March 19, 2014, 04:54:34 PM The diameter is roughly 5 inches and each boom is bolted 1" into the centre plates thus giving a tip to tip of 39" 17 + 5 + 17= 39"
Pls. Don't me me cutting you, you said 36" spinner tip to spinner tip, so only if you plan to install half the motor mount on the boom will the 36" tip to tip work, while if you wish to install the entire motor mount you would need an additional .75" (17" boom) and I chose 18" only because it's in multiples of 1/2 a foot :) Title: Re: Cheap AnyCopter Frames and Kits (Quad kits Under Rs.300) Post by: VC on March 19, 2014, 04:57:55 PM Thanks will it be possible to let me have 8" dia centre plates and 16" tubes. I would like 2" of tube bolted into the plates.
Or even 8" dia plates and 18" tubes with 3" bolted in will do. Title: Re: Cheap AnyCopter Frames and Kits (Quad kits Under Rs.300) Post by: yashodhanp on March 19, 2014, 04:59:35 PM I am really sorry, but 8" centre plates won't be possible :)
Title: Re: Cheap AnyCopter Frames and Kits (Quad kits Under Rs.300) Post by: yashodhanp on March 19, 2014, 05:22:46 PM A standard quad kit is available at Rs. 350. INCLUSIVE of Shipping and Handling a Across. India.
The Kit will include: 1. Centre Plates x 1 2. 12 x 1/2" Booms x 4(predrilled for the centre plates, pls drill motor mounts yourself as per your requirements) 3. 1.5" discs for motor mounts x 4 4. The Hardware pack consisting of 18 M3 Screws and Nuts. (Not enough for motor mounts and motors) Additional hardware available at extra (special) cost of Rs. 80 for additional sets of screws and nuts (18 of each) Title: Re: Cheap AnyCopter Frames and Kits (Quad kits Under Rs.375) Post by: VC on March 19, 2014, 06:19:59 PM Rs.350/- for an ARF Quad frame? ??? Yet no takers? ???
Let me be the first one - One for me please. Will remit in a while. Title: Re: Cheap AnyCopter Frames and Kits (Quad kits Under Rs.375) Post by: yashodhanp on March 19, 2014, 06:25:06 PM Sure, will ship it tomorrow/day after. Kindly PM/Whatsapp your address :D
Title: Re: Cheap AnyCopter Frames and Kits (Quad kits Under Rs.375) Post by: yashodhanp on March 19, 2014, 07:24:01 PM Anyone interested in the quad kit?
P.S. i am asking this, so that i can kit them out together. Title: Re: Cheap AnyCopter Frames and Kits (Quad kits Under Rs.375) Post by: v2 eagle on March 20, 2014, 12:17:33 AM Need a 2xTricopter center plate and 3xbumble bee motor mount, will send you the template(the same rcexplorer.se david windestal template) by today, PM me your email ID and bank acc no, need a quote on the same with shipping to chennai(Speed post only)
Ashok.P Title: Re: Cheap AnyCopter Frames and Kits (Quad kits Under Rs.375) Post by: yashodhanp on March 20, 2014, 07:45:05 AM Bump. Anyone else interested in the quad kit @350/- inclusive of shipping across india ??
Title: Re: Cheap AnyCopter Frames and Kits (Quad kits Under Rs.375) Post by: roby on March 20, 2014, 03:11:17 PM is it a 350mm frame?
was wondering if you can make a 450mm? what's the charge inclusive of shipping? Title: Re: Cheap AnyCopter Frames and Kits (Quad kits Under Rs.375) Post by: yashodhanp on March 20, 2014, 08:30:51 PM No. The quad is 27" MtM, that would cost 375/- inclusive of shipping.
Title: Re: Cheap AnyCopter Frames and Kits (Quad kits Under Rs.375) Post by: yashodhanp on March 20, 2014, 08:43:54 PM Custom Orders Received from "Sidewinder" and "v2_eagle". Will quote prices by tomorrow 9AM
Regards Title: Re: Cheap AnyCopter Frames and Kits (Quad kits Under Rs.375) Post by: yashodhanp on March 20, 2014, 08:48:45 PM Update: Pricing revised to 375/- for the Quad Kit, due to certain calculation errors I misquoted @350/-. Pls use the other thread to place orders for the Quad.
Regards Title: Re: Cheap AnyCopter Frames and Kits (Quad kits Under Rs.375) Post by: roby on March 20, 2014, 09:40:47 PM Where is the order thread? I think I sent you pm long back?
Title: Re: Cheap AnyCopter Frames and Kits (Quad kits Under Rs.375) Post by: yashodhanp on March 20, 2014, 09:49:55 PM Check the post in the sales area just below this one.
Title: Re: Cheap AnyCopter Frames and Kits (Quad kits Under Rs.375) Post by: SideWinder on March 21, 2014, 09:28:37 PM Yashodhanp any updates on my/our requests.
Title: Re: Cheap AnyCopter Frames and Kits (Quad kits Under Rs.375) Post by: yashodhanp on March 21, 2014, 09:36:29 PM Hello, I am sorry for the delay, can you please allow me to give your quotes tomorrow morning first thing?
Title: Re: Cheap AnyCopter Frames and Kits (Quad kits Under Rs.375) Post by: SideWinder on March 21, 2014, 09:39:39 PM Please take your time, just thought of reminding you incase you forgot about it.
Title: Re: Cheap AnyCopter Frames and Kits (Quad kits Under Rs.375) Post by: yashodhanp on March 21, 2014, 09:46:14 PM No no.. My laptop is giving some troubles :( hanging frequently.
Title: Re: Cheap AnyCopter Frames and Kits (Quad kits Under Rs.375) Post by: rcpilotacro on March 21, 2014, 10:23:42 PM one for me, incl extra hardware for the motor mounting
Title: Re: Cheap AnyCopter Frames and Kits (Quad kits Under Rs.375) Post by: yashodhanp on March 22, 2014, 02:06:49 PM Another set reserved for Gusty Ji. (@gusty ji I request you pls give me time till Tuesday to ship out your order)
Title: Re: Cheap AnyCopter Frames and Kits (Quad kits Under Rs.375) Post by: yashodhanp on March 26, 2014, 03:22:56 PM Bump. Anyone else interested?
Title: Re: Cheap AnyCopter Frames and Kits (Quad kits Under Rs.375) Post by: roby on March 28, 2014, 12:46:17 AM one for me :)
Title: Re: Post by: Shyam Hembram on March 29, 2014, 01:18:02 AM Yashodhanp can u make 450size frames like reptile or deadcat,etc,will be first to place order.just curious if you could do that???
Title: Re: Cheap AnyCopter Frames and Kits (Quad kits Under Rs.375) Post by: yashodhanp on March 29, 2014, 08:47:47 AM Order for the quad kit Temporarily closed.
Title: Re: Cheap AnyCopter Frames and Kits (Quad kits Under Rs.375) Post by: yashodhanp on April 03, 2014, 08:13:32 AM Hi guys,
Instead of the previous Quad Kit, i have made another quad kit which is a lot easier to assemble and use. The kit is Priced at Rs. 350 + Rs. 90 (Flat Rate Shipping and handling across India) The kit will include: 1. The Kit 2. 32 Screws and Nuts (adequate for everything) 3. 6/8 mm sq. wood for reinforcements and landing gear. The battery can be suspended via battery straps, but you will have to provide a landing gear if you wish to. The Control Board holes are spaced 45mm apart (KK standard) and are easily switched between + and X. You may use foam tape to mount other sizes. Spares (Booms and Centre Plates) will be available at extremely reasonable prices as well I am making this available only on a preorder (shipping commencing on Wednesday/Thursday) since i need atleast 5-7 orders for the kit to make it economical. Ideal for people wanting to try multirotors on the cheap :) Discounts available on orders above 3 pieces Regards Title: Re: Cheap AnyCopter Frames and Kits (Quad kits Under Rs.375) Post by: manojswizera on April 03, 2014, 11:27:02 AM good Yash.
what material is used for booms ? and its thickness. Title: Re: Cheap AnyCopter Frames and Kits (Quad kits Under Rs.375) Post by: yashodhanp on April 03, 2014, 12:26:15 PM Its all 2.5mm HDF, it will be reinforced using 6/8mm wood square rods glued to it.
Regards Title: Re: Post by: Ahamed on April 16, 2014, 09:54:42 PM I need one kit how much and how soon can u deliver at Hyderabad
Sent from my Nexus 4 using Tapatalk Title: Re: Cheap AnyCopter Frames and Kits (Quad kits Under Rs.375) Post by: yashodhanp on April 17, 2014, 05:36:55 AM @ahamed kindly have a look at this
http://www.rcindia.org/for-sale/450mm-quad-kits-rs-450-shipping- (http://www.rcindia.org/for-sale/450mm-quad-kits-rs-450-shipping-)!!/ Title: Re: Cheap AnyCopter Frames and Kits (Quad kits Under Rs.375) Post by: yashodhanp on May 07, 2014, 12:29:16 PM Bump for the Anycopter frame only. (aluminium booms undrilled also possible).
Orders for the 450mm quad taken as well(@400 all inclusive of shipping!!) :hatsoff: (PM for discounts) Title: Re: Cheap AnyCopter Frames and Kits (Quad kits Under Rs.375) Post by: GreenBrains on May 10, 2014, 04:53:04 PM Hi,
Can you build a Octocopter Frame like this?... Tarot IRON MAN1000 8 aix octocopter TL100B01 Frame Kit http://www.hobbyking.com/hobbyking/store/__54327__tarot_iron_man_t1000_octo_copter_carbon_fiber_frame_kit_tl100b01.html (http://www.hobbyking.com/hobbyking/store/__54327__tarot_iron_man_t1000_octo_copter_carbon_fiber_frame_kit_tl100b01.html) Any other custom designed and manufactured but stable and strong 800-1000 mm OctoCopter Frame will do, please let me know if anyone have it new or used. I wanted to use it for Professional Aerial Photography Octocopter. If anyone have it, please contact me ASAP. Thanks & Regards, Nilesh Shinde nilshinde@yahoo.com Ph.: 07588578939 Title: Re: Cheap AnyCopter Frames and Kits (Quad kits Under Rs.375) Post by: blackhawk_sourav on February 08, 2015, 10:55:26 AM Hi, can you give a quotation for 450 mm quad - centre plates with aluminium square rods and all required screws. Am from kolkata and a newbie in this hobby.
Thanks & Rgds, Sourav Title: Re: Cheap AnyCopter Frames and Kits (Quad kits Under Rs.375) Post by: teamnamibia on February 09, 2015, 12:09:18 AM Hey Yashod, how much will you sell aluminium boom rods for?
|