Price reduced please see in the later posts

Greetings
I had bought the following things from hobbyking sometime back. I had bought all the electronics which complemented each other. The following is the list of the items in that order. I am selling it now because my college is ending and its packup time. I'm leaving the hobby now.
I used to fly during my semester vacations, so i made the aircraft according to these specs in one semester vacation then my father got posted out of the station and then i couldnt find a place to fly. The following electronics have had only one flight.

 
S.No.   Name................................................................Qty....Price
1   ZIPPY Flightmax 5000mAh 6S1P 30C.........................1.......3500
2   Turnigy 4250 Brushless Motor 1000kv (2kg thrust )..1.......2500
3   TURNIGY Plush 60amp Speed Controller.....................1.......2500
4   HXT Motor Mount for 35-48 size motor.....................1.......200
5   Prop adapter to suit 5.0mm motor shaft (collet).........1.......300
6   APC style propeller 11x5.5-E...................................11.....1100
7   TGS Sport 11x5.5E Precision propeller........................4.......600
8   Nylon XT60 Connectors Male/Female.........................3.......200
9   3 socket gold connector w/ Housing 8cm 14AWG F......1.......150
10   3 socket gold connector w/ Housing 8cm 14AWG M.....1.......150
11   Pin Horn 9x13...................................................... 2.......150
12   Nylon & Pinned Hinge 20x36 (10pcs).........................2.......150
13   TURNIGY BESC Programming Card............................1.......500
14   iCharger 206B 300W 8s Balance/Charger...................1.......8000
15   12V 5A 110/240V 50/60Hz Power Supply...................1.......700

I would like to sell all in one go! Since, they all complement each other.

All prices are negotiable.

   
ZIPPY Flightmax 5000mAh 6S1P 30C
Zippy Flightmax batteries deliver full capacity & discharge as well as being the best value batteries in the hobby market today!
Spec.
Capacity: 5000mAh
Voltage: 6S1P / 6 Cell / 22.2v
Discharge: 30C Constant / 40C Burst
Weight: 784g (including wire, plug & shrink wrap)
Dimensions: 146x53x53mm
Balance Plug: JST-XH
Discharge Plug: 5.5mm Bullet-Connector

Turnigy 4250 Brushless Motor 1000kv
Dimension: 48mm x 42mm, 68mm(with shaft)
Weight: 199g  (kv1000) (not including connectors)
Diameter of shaft: 5mm
Length of front shaft: 18.7mm
Lamination thickness: .2mm
Magnet type: 45SH
 
Max performance
Voltage: 4S
Max current: 45~54A
Prop: 10x5~11x5.5
Thrust: 2050~2450g
For 2000-2500g 3D model airplane.

TURNIGY Plush 60amp Speed Controller
Plush 60A Brushless Speed Controller
The plush series ESC are a very good quality controller. They have a broad range of programming features and a smooth throttle response compared to other BESCs in the same price range.
This BESC can handle 3A continuous current which is great for larger planes with bigger servos.

Cont Current: 60A
Burst Current: 80A
BEC Mode: Switching
BEC : 5v / 3A
Input: 5.6v-22v
Weight: 60g
Size: 80x31x14mm
Supported motor speed for all TURNIGY ESCs is;
(Maximum): 210000 RPM (2 poles), 70000 RPM (6 poles), 35000 RPM (12 poles).

HXT Motor Mount for 35-48 size motor
This is the most secure and strongest way to bolt your HXT outrunner into the front of your plane.
Mount is made from hardened and machined alloy and is very light.
Motor mount holes are 25mm across.

Prop adapter to suit 5.0mm motor shaft (collet)
Prop adapter.
Prop is held with large nut, while shaft held securely in place with a thick collet adapter.
Made from anodized alloy.

TGS Sport 11x5.5E Precision propeller
TGS Sport Propeller
High Impact resin-polymer.
Precision moulded for an accurate balance.
Distortion resistant.
Low noise.
Includes adapter rings for different shaft sizes.

iCharger 206B 300W 8s Balance/Charger
Capable of handling up to 300W or 20A charge rates. Lipoly, LiFe and Lilo compatible as well as able to charge up to 6 cell packs.
The iCharger is famous for its ultra-accurate balancing feature. Each unit is calibrated at the factory prior to shipping!
This is a quality precision charger.

Spec.
Input voltage range: 10~28.0VDC
Charge current range: 0.05 20.0A
Discharge current range: 0.05 20.0A
Maximum charge power capacity: 300W @ input voltage > 18V
Maximum discharge power capacity: 20W
Maximum extern discharge power capacity: 500W @ 25V/20A
Current drain for balancing: <350mA
Balance accuracy: <10mV
Lithium (LiPo/LiIo/LiFe) battery cell count: 1~6 series (In non-balance mode, expand LiFe to 8s)
NiCd/NiMH battery cell count: 1~17 series
Pb battery cell count: 1~12 series (2~24V)
Log Files storage: 16Mbit (36 hours)
Battery setup memories: 10
Intelligent temperature control: Yes
PC Connect: USB port
Weight: 350g
Dimensions (L X W X D): 134 x 83 x 25mm (5.28 x 3.27 x 0.98in)

Very high prices! Lowering them might help attract potential buyers. Cheers!

Thank you, veloci. I appreciate your suggestion. I shall do so pronto.

On veloci's suggestion I have reduced the price by 10% on all of them throughout the pricelist. (I hope it helps)

S. No.	Name	Qty	Price		Reduced Price
1	ZIPPY Flightmax 5000mAh 6S1P 30C	1	3500		3150
2	Turnigy 4250 Brushless Motor 1000kv (2kg thrust  )	1	2500		2250
3	TURNIGY Plush 60amp Speed Controller	1	2500		2250
4	HXT Motor Mount for 35-48 size motor	1	200		180
5	Prop adapter to suit 5.0mm motor shaft (collet)	1	300		270
6	APC style propeller 11x5.5-E	11	1100		990
7	TGS Sport 11x5.5E Precision propeller	4	600		540
8	Nylon XT60 Connectors Male/Female	3	200		180
9	3 socket gold connector w/ Housing 8cm 14AWG F	1	150		135
10	3 socket gold connector w/ Housing 8cm 14AWG M	1	150		135
11	Pin Horn 9x13	2	150		135
12	Nylon & Pinned Hinge 20x36 (10pcs)	2	150		135
13	TURNIGY BESC Programming Card	1	500		450
14	iCharger 206B 300W 8s Balance/Charger	1	8000		7200
15	12V 5A 110/240V 50/60Hz Power Supply	1	700		630

All the best my friend for your sale.

This is second such sale I am looking at:
I am really surprised how anyone can leave HOBBY? 
Hobby is what we love to do when not doing Curricular/Professional activity. So If I leave Hobby I will have nothing left in my life except earning and living.

If you've use the term 'leaving Hobby' to make your sale thread lucrative then its a different case.

whatever ways it is, all the best

@asinghatiya
Thank you for your concern. This is what i love about the RC India community everyone looks out for each other.

I am leaving the hobby in the complete sense. I want to now earn and live. My college is ending in a few months and i want to sell off these electronics so that others can use it and above all i can give a portion of the money it back to my dad, not that he needs it but because everytime i see these things in my room unused i feel a guilt about the fact that i spent so much of my father's money which i dont think that i will have the time to build and fly again. If i had bought these things myself then it would have been a completely different story.

I dont have any kind of experience in selling things because till now I always gave my things off to my juniors in college but this time i cannot do so because the cumulative cost of all these items is high. If you have any suggestions regarding how much i should sell these things off for i would love to hear about them.

On a different note, I also live in gurgaon during my vacations. Where do you stay? I live in sector 56.

pm sent

price looks high still..... equal to new items ..... 

granted... its been used just once and most of the things are in their sealed packages still... its considerably cheaper than how much i paid to buy the whole package when i bought it...

I disagree. One can always leave one hobby to pick up another

do you have any car esc for sale.

@imran - sorry I do not

In the order of contacting time -

Till/Around 20th Jan :
    All items have been booked for wingman4ever.

Otherwise

Post/Around 20th Jan :
    2 APC props booked for pooyan1947.
    All items minus charger booked for cyromanish.

 

With reference to 'Reply #12'

I have begun discussions with
1. pooyan1947 - for 2 APC Props
2. cyromanish - for all remaining items minus charger
3. mbsanoop - for the charger

If anyone else is interested still, please leave me a PM.

Vaibhav

Good decision !though i am sure your father wont mind you keeping'em, i wont mind if vineet does, else you can dump it with me at Shillong or at Dehradun (My sasuraal). if going back to tambaram you can dump them with nirmalendu too,

All the best

Gusty
PS
wish you keep'em and fly'em whenever you can, it is a great stress buster

Good evening Sir
I am sure he doesn't mind but I'd like to take stock of the matters at hand and sell off all the things. I feel this is the least I can do for him, myself and the RC items, all of which I love so dearly. I hate to put a price on any of them but I must.
Good to hear you have people in Dehradun.
My father is no longer posted in Tambaram, he is now posted in Delhi. So going to Tambaram it out of the picture now.
I would love to return to the hobby, but not right now. I shall do that once i'm settled. I wish/intend to focus solely on getting settled now.
Till then I will look to my other hobby for stress busting : astronomy. I invite you to see some pictures I took with my telescope https://www.facebook.com/media/set/?set=a.10151344722105591.814894.811205590&type=1&l=c477bc016a

Good pics there esp of Saturn, not to mention the 6 pack abs,
 Astrophysics (somehow didn't particularly like observational astronomy) was my chosen field for specialization.... until nation called.

PS
Wouldn't mind the motor though

Observational astronomy incidentally is my favourite part. I can sit with my telescope at hours at length. I can sit without my telescope for hours at length seeing the night sky also.

Sure, I can keep the motor for you. I'll add your name in the list of the people to sell the items to in the chronological order. I am preferring to let all of it go in sets though. Would you like the ESC and/or Props and/or prop adapters also because they all have been bought to complement each other?

Nice to know that we share some alternate interests other than RC / Modelling. I use a Konusmotor 90 on a Equatorial Mount and use my Sony Cybershot (still) and modified webcam (movie) for  astro photography. Must share notes someday.

Sir, we must!
You can see the adapter i designed and made for my sony cybershot on the lathe using teflon. I use my sony cybershot for still and video. I did try using my webcam but it was not able to work that well.

Modified my Webcam by cutting and hot glueing a 35mm film case, as an adaptor, after unscrewing / removing the lens from the webcam. Used a Logitech V-UM14 webcam. Got fantastic results - could see the moon ACTUALLY moving across the screen as the motor drive tracked it to perfection. My PC has been formatted since then, I will try and find that video and the Saturn/Uranus/ Pleiades/ M42 Shots.

Must upgrade my hardware now. RCIndia has killed all interests since I joined it on 3/11/2009.

By the way, now is a good time to start tracking Saturn again, with a 20% shift happening now. The best phase will be around 2015/16/17 and by then I plan to upgrade to a 250mm reflector. The next perfect opportunity will present itself around 2044 and I don't think I will be around then.

Here are some old shots, hope you like them.

By the way, can you arrange for a similar cybershot adaptor for me? I will pay for all expenses. Please PM me the details. I will use an old Cybershot DSC 730 for this purpose.

Extremely sorry for having hijacked this thread. My apologies.

Let me know via PM as to how much, will confirm post PM
PS
Looking at night sky in Chennai hours on end was a favourite past time as i used to sleep on the terrace. There was no much of pollution in the 70’s



I think we will be around VC, ripe old, waiting for death to happen

1. Speaking of 2044, i am waiting for 28 July 2061 to see the halley's comet. I will be mighty old then!  
2. No issue of Hijacking the thread, at least its in circulation. I really need to unload 'all' my things.
3. Regarding the adapter i will send you a PM for it.
4. Excellent photos there 
PM sent to rcpilotacro and VC

I noticed I hadn't put the charger's image. So here it is 300W charger and its power supply.  Also is a close-up image of the battery (ZIPPY Flightmax 5000mAh 6S1P 30C) .

Cheerio

i am interested . can you pm me your no . ?

PMed

Those pics are really awesome buddy

@satyagupta : Thank you