The following brushed DC motors are for sale.
Condition- New old stock.

1. 600 size with turbofan cooling.--one   Rs650
2. 550 size --one  Rs 550
3. 400 size --one  Rs 200
4. 300 size --one  Rs 200
5. Miniature 14 mm can length --four  Rs 100 each

Shipping extra.(Actual )

Photos attached , may not be of very good quality though.

Please post the dimensions of the motors. Can Length / Dia / Shaft dia and Shaft length. Even approx values will do.

Cheers!

600,550,400,300,14 is can length only, in mm.
Diameter  -  600 and 550 motors= 35mm, 400 and 300 motors= 28mm,for the smallest motor it is 10mm
shaft diameter- 600 and 550 motors=3.17 mm, 400 motor= 2mm, 300 motor= 2.3mm, small motor =0.9 mm
Shaft length- 600 motor=9mm,550 motor= 12mm, 400 motor=11mm,300 motor=7mm,small motor=4mm

The 600 size motor is Groupner brand but the sticker is no longer on it now. It has a built in cooling fan towards the bush end.

Jitender

The cost of the DC Motors is appx. equal to BL Motors, but BL Motors have much Power/weight ratio. Moreover, it is not coming with Gear set (1:3. and prop hub.

And, if anyone want to get it cheap, just go to Printer dispose off shop, and you can get much more, very cheap.

And in Chandni Chawk of Kolkata, Brand new Rs20/- motors can give much power when the brush is reworked with brass brush plate. No winding replacement and gear change is required. And costs total comes maximum Rs.50/- if you even replace the winding too. It's 300 size motor.

Thanks

Dear  KALYANPRODHAN

Can you  rework the brass brush plate and do the rewinding on four identical 300 size motors for me and I will buy them for Rs 200 + shipping.

Jitender