Hi folks, I have some items for sale that I am no longer finding time to use, ill be listing them here, so kindly watch this space
1. DJI Phantom 2 with Zenmus HD-3D 3 axis Gimbal
Included in the deal -
1 phantom 2 quadcopter
1 Zenmuse HD-3D gimbal
1 low pass filter for noise-free video transmission (already installed)
1 gen2 phantom 2.4ghz 150mW 6 channel radio controller with slider wheel for camera control ( this is the upgraded controller, not the one that comes with phantom, I bought it for $130 extra)
4 propellor guards
2 phantom 3 intelligent batteries
1 DJI original battery charger
1 modified battery module that allows you to use regular lipo batteries with phantom 2.
Price:- 15000 + shipping
2. Self-made quadcopter, the specifications, and technical details are listed below:-
A.) Frame:- 360mm diagonal X frame, with CNC aluminum center plate and 3d printed electronics bay and landing gear
B.) Motors - Racestar BR2312 960KV CW/CCW motors with Japanese NTM bearings
C.) ESC - EMAX 30a ultralight ESC with BLheli firmware (can be flashed with a different firmware using a regular FTDI board) ESC have freewheeling enabled, so the quad doesn't wobble in high wind
D.) Power distribution board - Matekf405 PDB with a 12V and a 5V BEC onboard to power your camera and VTX , plus anything else you decide to attach. PDB has a 6A max output, it also has an on-board low pass filter to remove noise from the video transmission and give clear video downlink
E.) Flight controller - DJI NAZA M LITE, with GPS, compass, voltage sensor and status LED module. Gps and compass are you already mounted on a CNC aluminum stand to avoid electrical interference.
The flight controller has 4 flight modes, full GPS enabled mode, auto stabilization mode, manual mode and return to home mode. In case of a failure or a low battery, it will automatically fly to the takeoff location.
F.) Propeller - 9045 self-locking nylon reinforced propellors (4 nos)
G.) Camera - 700tvl 2.3MP Sony ultrawide field of view color camera
H.) Video transmitter - 5.8ghz 200mW video transmitter with on-screen information overlay and variable power setting from 20mW to 200mW. The effective transmission range is 2km on 200mW. It can be set with the button and LED display onboard. Vtx is fitted with a custom-tuned 5.8ghz cloverleaf antenna for equal signal strength in all directions. Has a screw-type RPSAM connector so you can upgrade the antenna if you like.
I.) Gimbal - the camera is on a single axis servo gimbal that compensates for the vertical tilt of the aircraft when flying forwards. The camera is self stabilized and can be positioned to point at anything between the horizon and vertically downward direction and would stay locked to it in flight
Price:- 18000+ shipping