Hello everyone ,
Since, now I'd shifted to Aeromodelling so following things are of no use to me. Also, I need some money to order few things hence, I'd put these items for sale. All these items are a bit old (say around 1 year)but all in working condition. I'd checked my self and would check again before sending it to someone. In my opinion, all these are very good for school/college students who are interested in building LFR's, robotic arms, etc. Still, offer is open to everyone.
1.) Normal Geared Motor:
a.) 30 rpm Geared Motor X 3 (Price:70INR each + shipping at actuals.)
30RPM 12V DC geared motors for robotics applications. Very easy to use and available in standard size. Nut and threads on shaft to easily connect and internal threaded shaft for easily connecting it to wheel.
30 RPM 12V DC motors with Gearbox
125gm weight
2kgcm torque
No-load current = 60 mA(Max), Load current = 300 mA(Max)

b.) 45 RPM X 3(Price:70INR each + shipping at actuals.)
c.)60 RPM X 3(Price:70INR each + shipping at actuals.)
I'd got motors of more RPM(around 100, 200, 500). As soon as I'll check them would post about them too.

2.) 16x2 Character LCD Display (Yellow Green) X 10 (Price: 90INR + shipping at actuals.)

This 16x2 LCD display is based on the HD44870 display controller which makes it is easy to interface this LCD most microcontrollers. Its extreme popularity ensures that no matter which microcontroller platform you are using, you will definitely find ready libraries to use this LCD.
It works at 5V and has Yellow-Green Backlight which can be switched on and off as desired. The contrast of the screen can also be controlled by varying the voltage at the contrast control pin(Pin 3).
Display：16×2 Characters
Outline：122.0ｘ44.0ｘ14.0
VA：106.0ｘ24.0
Controller：SPLC780D(could be different in different pieces)
Character：4.84ｘ9.66
Driver：1/16
LCD：STN Yellow Green
Backlight：Yellow Green LED

3.) Wheels (Price: 20INR + shipping at actuals.)

As soon as I'm done with testing part and collecting more items I would post the pics. Once, I get to know the exact shipping price I'll include the price here.

 

pics plz..

Just give me sometime and I'll post it. Actually searching for my DMM . Someone, took it yesterday and didnt returned it
Dimensions for wheels also I'll post along with the total number of wheels.
 

Ok so its finally done. Pics are attached of all the items mentioned above.

Wheels: diameter-7cm, width-2cm (both black and white)

Adding another product to the thread:
450mm quadcopter arms. I'd got three which are now useless to me as now I use aluminum and wooden booms for building frame. So, if someone has broken his arm or a beginner who needs it could go for it. This could be also used for building a tricopter. You just need to design a centre plate for this and you are good to go.
Length of each arm: approx. 21cm
Price: 250INR each + shipping
If someone buys all three then shipping free.

Still more items are there.

 

More pics.

Motors

Its 250INR for each arm and not for all three.
If you buy all three then shipping free.

Bump

Price for multicopter arms reduce to 200/- per arm.
Shipping free if someone buys all arms.

 

bump

Bhai , use a little brain , who would like to buy character displays , dc geared motors and only arms on a Rc site , you can try to sell the LCD and motor on ebay , but I don't think anyone would buy three arms , as they are designed for quad not tri and no one else will sell them one arm ( after they would have bought from you )

Hi devang..
See, these things are of no use to me right now and holding some of my space that I could use for other purpose. Moreover, when it comes to DIY then all these things could be used very easily. Like, motors could be used for Ground control stations. You can mount your antenna's on it and make an autonomous system that could change antenna facing wrt to aircraft...
LCD's could be used for GCS(ground control station/ displays)
Arms could be used for tricopter's as well. I'd mentioned it in one post. Just design a centre plate for you. Moreover, if any arm of existing platform is damaged or broken you can use these.(talking about 450 frames)
Its all about how you look at things and moreover, think as much as you can. DIY is always very self-satisfying.

 

We'll if so , then why no one is buying this stuff ?

well devang firstly please respectfully talk with him he is senior than you i don't really understand how a north indian born boy can say "bhai" we are always taught to say "aap","ji","bhaiya" etc for elders so please use that
and "yaar" also works but bhai always sounds cheap to me its my opinion...

and about the sale i will go with devang,utkarsh bhaiya u should try on ebay it will sell easily their as on rcindia very less people are involved in core things and like you i also have these things and are of no use to me so if your get sold then tell me about it also

Regards
yash

Okay okay fine , sorry , sir ji .

i am not sir just call me buddy

wow... all lucknow walas in this thread.....so i shouldn't be missed out...

we all should meet sometime...

anyone interested can call me on 9415200477

yeah sure vishal where do u live?...
 i live in sahara states,jankipuram ....

I stay in udaiganj...
Tell me your mobile number. ..i'll call u tomorrow.

@devang: buddy, lets hope for the best. I hope I'll get a buyer soon.
@yash: thank you. yeah, surely I would tell you if I'll get some positive deal.
@vishal: Hi, it was good to have you here in this thread... truly said: "all lucknow walas here" I wish I could join you people on your next meet. Since, I'd to leave for college tomorrow.
@yash: couldn't come this tuesday as well. I hope I'll be coming to lucknow on 9th so might be then it is possible.

 

couldn't see that beautiful c17(build by yash)... very sad about it. one day definitely I'll come..

do you still have the booms ?

@viraj1991: very sorry. Booked for tantragna.