|
Title: Futaba 6 channel 2.4 Ghz micro reciever and hitech 1/4 scale servo for sale Post by: flatspin_king on May 04, 2010, 05:25:24 PM Hi all,
Selling a used Futaba R616FFM FASST receiver with three micro plug leads. Has very little use and works perfect! Asking Rs 2600. Here is the technical info. This is the Futaba R616FFM 2.4GHz FASST 6-Channel Receiver. Compatible with the following FASST transmitters; 6EX, 7C, and the following transmitter modules; TM7, TM8 (on 7 channel mode), TM10 (on 7 channel mode) and TM14 (on 7 channel mode). FEATURES: Designed for use with park flyers or indoor aircraft Compatible with micro connectors only Easy one touch linking to transmitter One year limited warranty INCLUDES: Futaba R616FFM 2.4GHz FASST 6-Channel Receiver with set up sheet REQUIRES: Installing in model and connecting servos and ESC SPECS: Dimensions: 1.5 x 0.9 x 0.3" (38 x 22 x 7mm) Weight: 0.22oz (6.3g) with case 0.14oz (4.0g) without case Power Requirement: 4.8V- 6.0V battery or regulated output from ESC F/S and Battery F/S function (for channel three) Battery F/S Voltage: 3.8V Current Drain: 75mA (w/no servos) with or without signal. Approximate range of 1000 ft. Also selling a Hitec HS 5745 metal gear, high torque servo - again hardly any use - works great. The only blemish is that one of the mounting tabs has a small piece broken off - as you can see in the pics. It can be mounted as is or for extra security I would suggest using a metal strap to put the bolt through. Asking Rs 2500. Technical info: The HS-5745MG giant scale servo uses Hitec’s digital, programmable servo technology to provide tons of torque and holding power for the most demanding applications. Featuring three ball bearings, a custom external motor heat sink, and a solid metal gear train, the HS-5745MG is the servo of choice for your next large scale R/C project. Hitec HS-5745MG Specifications * Amplifier Type: Digital Amplifier & Mosfet Driver * Operating Voltage: 4.8-6.0 Volts * Operating Speed (4.8V): 0.18sec/60° at no load * Operating Speed (6.0V): 0.15sec/60° at no load * Stall Torque (4.8V): 208 oz/in. (15kg.cm) * Stall Torque (6.0V): 250 oz/in. (18kg.cm) * Direction: Clockwise/Pulse Traveling 1500 to 1900usec * Current Drain (4.8V): 3mA/idle and 700mA no load operating * Current Drain (6.0V): 3mA/idle and 840mA no load operating * Stall Current (4.8V): 4000mA * Stall Current (6.0V): 4800mA * Dead Band Width: 2usec * Motor Type: Cored Carbon Brush * Bearing Type: Dual Ball Bearing * Gear Type: 1 Resin, 3 Metal Gears * Connector Wire Length: 11.8" (300mm) * Connector Wire Gauge: 22AWG * Connector Wire Strand Count: 60EA * Dimensions: 2.30" x 1.10"x 2.000" (59 x 29 x 52 mm) * Weight: 5.68oz (161g) Title: Re: Futaba 6 channel 2.4 Ghz micro reciever and hitech 1/4 scale servo for sale Post by: flatspin_king on June 02, 2010, 09:31:08 PM Adding a couple of more pics of the RX as requested. My camera is not the best ...
Title: Re: Futaba 6 channel 2.4 Ghz micro reciever and hitech 1/4 scale servo for sale Post by: flatspin_king on October 15, 2010, 12:06:51 PM Price drop on the Receiver! Rs 2000 (firm) plus shipping.
Title: Re: Futaba 6 channel 2.4 Ghz micro reciever and hitech 1/4 scale servo for sale Post by: roopeshkrishna on November 05, 2010, 03:11:46 PM Hello Friend..indeed i am looking for a nice radio set. i am willing to buy it from you..so i need more details from you.if you are interested please mail me at roopeshkrishna34@gmail.com.
|