These items work great they or not so old and not used much I buy them from hobby king and I have to pay about 14k for them and I also not use them much but now I need money for my new project I have to sold them. I want only 8.5k for that stuff but I can also sell them for 8k.they work great!!!. If any want to buy only motor the price is 4250 with all the mounting accessories and is any want to buy only ESC the price is 4250.I think it is a great deal for this stuff. 1) Specs:
Model: NTM Prop Drive Series 2836 1000kv
Kv: 1000rpm/v
Poles: 3
Motor Wind: 14T
Max current: 30A
Max Power: 400W
Shaft: 4mm
Weight: 89g
ESC: 30~40A
Cell count: 3s~6s Lipoly
Bolt holes: 16mm & 19mm
Bolt thread: M3
Connection: 3.5mm Bullet-connector
Prop Test Data:
11x7E - 11.1V / 220W / 20A / 976g thrust
11x7E - 14.8V / 412W / 27.7A / 1.485kg thrust
12x6E - 11.1V / 215W / 20A / 1.08kg thrust
12x6E - 14.8V / 430W / 29A / 1.42kg thrust
13x4E - 11.1V / 223W / 20A / 1.06kg thrust
13x4E - 14.8V / 400W / 27A / 1.48kg thrust 2)Turnigy Multistar 30 Amp Multi-rotor Brushless ESC 2-4S (OPTO)
Details:
• Smooth and linear throttle control
• Fast response to throttle input
• Atmel MCU
• Stalled motor protection
• Throttle signal lose protection
• Safe power-on (throttle lockout)
• Support 480Hz+ high refresh rates (up to 499hz)
• Compatible with programming card
Specs:
Constant Current: 30A
Input Voltage: 2-4 cells Lipoly
BEC: None (OPTO)
PWM: 8 KHz
Max RPM: 240,000rpm for 2 Poles Brushless Motor
PCB Size: 41mm x 24mm
Discharge Plugs: Male 3.5mm Bullet Connector
Motor Plugs: Female 3.5mm Bullet Connector
Weight: 32g.
Print
