Title: Hi guys i want sell my hobbyking NTM motor and turnigy ESC Post by: ritik harbola on June 26, 2015, 01:50:36 AM These items work great they or not so old and not used much I buy them from hobby king and I have to pay about 14k for them and I also not use them much but now I need money for my new project I have to sold them. I want only 8.5k for that stuff but I can also sell them for 8k.they work great!!!. If any want to buy only motor the price is 4250 with all the mounting accessories and is any want to buy only ESC the price is 4250.I think it is a great deal for this stuff. 1) Specs:
Model: NTM Prop Drive Series 2836 1000kv Kv: 1000rpm/v Poles: 3 Motor Wind: 14T Max current: 30A Max Power: 400W Shaft: 4mm Weight: 89g ESC: 30~40A Cell count: 3s~6s Lipoly Bolt holes: 16mm & 19mm Bolt thread: M3 Connection: 3.5mm Bullet-connector Prop Test Data: 11x7E - 11.1V / 220W / 20A / 976g thrust 11x7E - 14.8V / 412W / 27.7A / 1.485kg thrust 12x6E - 11.1V / 215W / 20A / 1.08kg thrust 12x6E - 14.8V / 430W / 29A / 1.42kg thrust 13x4E - 11.1V / 223W / 20A / 1.06kg thrust 13x4E - 14.8V / 400W / 27A / 1.48kg thrust 2)Turnigy Multistar 30 Amp Multi-rotor Brushless ESC 2-4S (OPTO) Details: • Smooth and linear throttle control • Fast response to throttle input • Atmel MCU • Stalled motor protection • Throttle signal lose protection • Safe power-on (throttle lockout) • Support 480Hz+ high refresh rates (up to 499hz) • Compatible with programming card Specs: Constant Current: 30A Input Voltage: 2-4 cells Lipoly BEC: None (OPTO) PWM: 8 KHz Max RPM: 240,000rpm for 2 Poles Brushless Motor PCB Size: 41mm x 24mm Discharge Plugs: Male 3.5mm Bullet Connector Motor Plugs: Female 3.5mm Bullet Connector Weight: 32g. Title: Re: Hi guys i want sell my hobbyking NTM motor and turnigy ESC Post by: Bhanu Prakash on June 28, 2015, 05:30:25 PM Please post full details like quantities real pictures and which accessories are included
Title: Re: Hi guys i want sell my hobbyking NTM motor and turnigy ESC Post by: ritik harbola on July 01, 2015, 07:13:24 PM i have 4 motors and 4 esc in good condition
Title: Re: Hi guys i want sell my hobbyking NTM motor and turnigy ESC Post by: ritik harbola on July 01, 2015, 07:16:09 PM here are the pic of the stuff
|