Not even did a maiden. Scared to take it to the skies as i faced my first dent in the pocket , i.e burnt tail servo..... Think i did a mistake buying it.  
So far have built it completely and have burnt the tail servo. Rest everything as new.Not even soldered the ESC as i was using mine.
All parts are new but heli is assembled, can dissassemble it if someone is interested to purchase  

Purchased it from RCBazaar on 7th january 2013 along with screw driver set, loctite , training gear and extra set of screws.( gods know what made me buy it )
Paid some where around 11500/-. Planning to sell it.
If anyone interested call me : 959020496
if required please tell me i ll post the pics.

what happened why u giving up on is so easly  ...getting it setup and running at first was a great deal of pain to me and ever beginner in rc heli but once your frst heli is done later it will be a piece of cake to setup and fine tune and build more .......no force but this is one experience u gonna miss out and wont get the feel in a plank no offence to plank lovers 

Hi Shannon , the thing is i need guidance. There are people who are willing to help , but it gets difficult for me to match up with them.
And i am scared like anything, planes are much easy to fly man @!!!

yes i do agree planes are easy  to fly but if people are willing to guide   u i guess u go ahead with with it trust me once u get over with your first set up u will never find it difficult ahead

Shannon, taking your word buddy, will give it a shot this weekend....and can i use a normal 9gms servo for the tail???

yes u can use a normal 9 gram servo if u need help with anything u can call me 9820506849 i use viber ansd whats app too so will be easy for you ....

Thanks man !!! sunday ill try to meet Rajesh(Rotor Zone) and try to maiden the bird.
But i will need help with the tail servo settings.

yeah sure anytime u can call also if ur irritated or distracted state of mind i dont suggest u build anything spl a heli just do it when u feel like and have a cool mind helps alot in understanding

Also can you tell me what is the procedure to centralise the tail rotor position and how to set the end points....

Hahaha yes thats true, i think i am acting crazy after the tail servo burnt..............but somewhere back of my mind still scared

yes but for this i need to know which gyro are u using ....endpoints can be set by gyro itself if option inbuil or by tx ...also before all this you need to check if your servo is moving the right direction and if your gyro is sensing in the right direction ...its hard to explain this way if u cal will be better and faster to understand

i am using the very same gyro u had shown in the video...

while calibrating the stock tail servo , i followed every step u showed , but god know what went wrong after sometime it stopped responding

there  are things u need to make sure off before getting to gyro setup if u set up everything correctly then gyro setup is quick and easy

sure, ill call u tomorrow morning or evening and will need your assistance

However if i get a good offer ill prefer selling it

ok no problem 

i doubt u should sell it ...ull miss something good ....plus the option of flying in a small place very small is not offered by planks

Yes shannon i cant fly planes in a small enclosure. Even i dont wanna sell it, but not just confident of myself to take the risk
Moreover while building i had properly did the pitch gettings got a correct -11 to +11 degree. But when i came to eleveators and ailerons i didnt get the correct angle . Elevator was +11 and -5 ailerons was somewhere the same.

yes so u just need to reduce the swash mix call tomm all this cant be typed

sure thanks man. this weekend i hope i can take her up

 

Giving up shannon ..... messed up the swash settings .....not able to get the correct angles and stuff..........
Putting up for sale buddy , Thanks for the help...........

People the heli is up for sale + Training kit (take away)  (if anyone wants).....
Heli is completely new
Asking price 9000/- + Shipping
Please PM me if interested


Its a RTF just need a LiPo and ur RX TX !!!!

i know a guy who wanted to sell v2 with 8ch sanya tx/rx/servo because he just was not able to fly the thing.

Bump !!!

Are u sure u wanna do it i know starting its tuff to figure out stuff but once u have gone through it u can set up any heli any time in a matter of min..i started building my kit yest fin the whole thing by night today when u called i was doing the setup iyt too me 30 min to do that since it is a new gyro so thats how good u will get after goin through it .....i even flew it today thrice ...anyway its ur call buddy but still think bout it its not that hard u will get it flybar has less steps than flynarleas to set up ...

yes shannon , not getting help from RCBazaar people also, so left with no options

if u want proper setup videos then got to helifreak and look for finless bobs videos on v2 all is shows step by step over there ...i learnt through videos on my frst heli build

can u please give me the link

Anyone interested?

Sir few pics ?

Pics coming up by EOD!!!

Hey, I never expected so much drama in your heli build. You could have called me if you are stuck before giving up. Consider this offer before you give up. I'll setup your heli and help you with the maiden. But you have to promise no more drama and learn to hover atleast without giving up. Don't tell me it is hard, I learned with no help at all from anybody and I didn't have any crashes while learning either. Crashes start only when you try maneuvers.

I pass by your place everyday on my way back from work, so I even offer to pick it up. Hope it is just radio setup you are left with, otherwise you need to give me some time to complete considering how much time I'm able to devote to this hobby now a days.

Hi Rajesh , thanks ... the thing is i am not able to get all the setting right.. trying to get one correct , i am messing the other setting. I burnt the tail servo . And had halt the build . I was setting up the swash , got the pitch angle right . When i checked the aileron and elevator i was getting uneven top and bottom ends that is +4 - 9 . tried to resolve that and messed up the pitch then . So i am just confused and irritated.
I had no intention to make it sound what it has come to . But i am just lacking some patience and help.
I am also aware u are ready to help , but i am not getting free on weekends , always piled with some or the other work.
To be frank even i dont wanna sell the heli , i wanna fly it and build more heli's later but just loosing confidence

You'll have a 1000 doubts in your mind while building your first heli, I understand that. Having one already built will help as you can use it as reference. Patience and perseverance is key to learn helis. Especially during the initial stages. You need to have that even if I build it for you. Let me know when you need me to pick up.

Learning Heli setup is not easy, anybody who has gone past that initial stage knows that. This hobby (specially dealing with things that fly) needs lot of patience and time invested in SIMs and ground work in reading and trying to understand. As RotorZone mentioned, lot of people have done this on their own, without any personal help, you should also be able to just do fine if you have the time.

Another good way would be to start with planes, they seem to take a little bit of less effort than helis, just my 2 cents. We will hate to see a person go away ...

is this your first heli, i mean at least you should have experience with 4ch helis. Jumping directly onto 6ch would cause serious dents on you pocket. Get someone who could get your heli to proper settings and even help you to fly it. v2 is really good heli for beginners..

Hi dheerajjuneja , I am into planes for the past 1+ years. The reason for me stepping into heli was lack of time to go to the flying field, since its far.
Moreover, i just got a little confused with the settings. Anyways have done some work today , atleast got the pitch, aileron , elevator angles right.

Bhavesh, i didn't realized that you are already a veteran, good to know you made progress. If i can be of any help, do let me know. I have tuned a couple helis and modded them myself, so i do have a bit of info to share.

Hiller 450v2 back on sale
Had 3 flights till date.
Asking price 8000 +shipping.

Includes everything as mentioned above.

REASON FOR SALE
Moving onto Nitro so need funds

Deal is closed.

Heli Sold !!!