Jumper R1 V2 Mini D16 receiver compatible with FrSky D16 XM+ protocol RXSR SBUS Jumper T-Pro T-Lite T18 T16 T12 T8SG

https://runrc.in/product/jumper-r1-v2-mini-d16-receiver-compatible-with-frsky-d16-xm-protocol-rxsr-sbus-jumper-t-pro-t-lite-t18-t16-t12-t8sg/

Specifications:

Dimension: 17.2*8.8*4.5mm (L x W x H)
Weight: 1.59

Number of Channels: 16Ch

Operating Voltage Range: 3.5V~6V
Operating Current: (0mA@5V
Operating Range: Full range

Distance: >2KM.
Compatibility: radios in D16 mode


Binding Procedure:

Binding is the process of uniquely associating the receiver to a transmitter/transmitter RF module. A transmitter internal
or external RF module can be bound to multiple receivers (not to be used simultaneously). A receiver can only be
bound to one RF module. Follow the steps below to finish the binding procedure.

1. Put the transmitter/transmitter RF module into binding mode
2. Connect the battery to the receiver while holding the F/S button (hold for more than 6 seconds) on the receiver to enter
the binding mode (red and green LEDs constant on). Press "bind" on the transmitter, the RED LED flashing indicates
binding successfully. Reboot the receiver and go back to the Normal Mode of transmitter RF. Green LED constant on
indicates linking normally.

PRICE:1350/-
CONTACT:8010224500