New Brushless motors and othert electronic stuff added to website.
www.rcelectro.com

Hi everyone,
First of all i would like to thank all of you for your kind support. My apologies for late replies.
I have added various electronic stuff for robotics and electronics and would also increase the items from time to time.



Thanks
Vivek Kumar Singh

Good stuff, do you have 5x3 or 6x3 props? 2 CW and 2 CCW?

vivek sir, I'm waiting for cf rods.

Wow good stuff! I'm certainly getting the Arduino nano soon!

Vivek bhaiyya, why don't you stock RC related arduino shields (gyro+acc etc.). They would sell like hot cakes.

Do you provide laser PCB etching service too? If not, do consider it.

Also are you considering stocking basic robot kits (simple diff-drive, line follower, tri-pod/ hexa-pod etc.)? They have really good demand in summer holidays. (I could provide you CAD files, schematics, manuals etc. free of cost if you are into it) 

It's always a pleasure buying from you!

just bought the USBasp programmer for avr from RCelectro.com

installed it on my win7 pc working

very happy , great service

thank you VK sir

just want to know when will you restock the accucell Lipo charger

For Robotics lovers

Arduino UNO Mega -Rs3000/-
Arduino Nano-1500/-

Visit www.rcelectro.com
Ph: 7599121411

Arduino Uno and Nano

unable to checkout, getting an error

Mail me the requirment at vivek@rcelectro.com

Hobbyking i86 Multi-Rotor Control Board
TURNIGY BESC Programming Card
Turnigy Receiver Controlled Switch
Visit www.rcelectro.com

need hobbyking esc 5o a for my hk 450 heli
and esc programing crad

The ICICI IFSC code mentioned on the website seems incorrect.

Thanks

Turnigy Multistar ESC 20 Amp and 30 Amp Available for Quadcopters

Multiwii 328P Flight controller w FTDI and DSM2 Port

http://www.rcelectro.com/rc-products/quadcopters-parts

www.rcelectro.com

hexTronik DT700 Brushless Outrunner 700kv


hexTronik 24gram Brushless Outrunner 1700kv



Turnigy Accucel-6 50W 6A Balancer/Charger w/ accessories


Battery Monitor 2-6S


Clear Foam Glue (Medium Cure) - Small 20g


Evotite CA460 Foam Safe Super Glue (Medium)


Clear Foam Glue (Medium Cure) - Large 100ml


Ultra Thin Foam Glue 40ml

Turnigy Accucel-6 50W 6A Balancer/Charger w/ accessories
your site showing already sold out

Updated the charger

4 Nos DT700 Motors for only 3400/-. Visit www.rcelectro.com

which glue good for foam ?

  verry good service from mr. v k singh 

Palwinder Singh  Ji, All are foam safe glue. You can use any one.

RC Ram Thanks for the comment. With you all always.

2200mah batteries and kk2 lcd quad board now in stock

If any club or group is interested then will give 10 Nos 2200mah batteries for 8K Plus shipping at actual. Only one set available.
Contact-9718534313

OrangeRx Futaba FASST Compatible 8Ch 2.4Ghz Receiver-1700/-



http://www.rcelectro.com/rc-products/tx-rx-systems-parts/OrangeRx%20Futaba%20FASST%20Compatible%208Ch%202.4Ghz%20Receiver
Compatible with Futaba FASST receivers: TM7, TM8, TM10, TM14 + more.

The OrangeRx 8ch is only 9.7g in weight and 33x55x14.5mm in size. Great for small planes, heli's, parkflyers or even medium sized sport planes.
Key features.
Light weight 9.7g
Compatible with FASST aircraft radio and module systems
8 Channels
Compact design 33x55x14.5mm
Twin antenna for diversity and long range.
Input voltage: 4~9.8V
Specified Range: 1.5km+
Resolution: 3072
Latency: 22ms
Failsafe
Included.
OrangeRx Futaba FASST 2.4Ghz Compatible 8Ch receiver

Turnigy Accucel-6 50W 6A Balancer/Charger w/ accessories re-stocked
Accurately balance and charge Lithium Polymer and NiMH

http://www.rcelectro.com/rc-products/lipo-batteries-chargers/turnigy-accucel-6-50w-6a-balance-charger


The Turnigy Accucel 6 Balance Charger utilises quality FET's and resistors to accurately balance and charge Lithium Polymer and NiMH batteries.
The Accucel-6 will handle LiPo/LiFe up to 6S and NiMH/NiCd up to 15S and shows individual cell voltage during charge with realtime updates
throughout the charge cycle.
The intuitive menu system means charging and cycling is an easy process and can be done quickly and accurately either at the field by using a 12v input such as a car battery or at home with a 12v power supply.
Bundled with the Accucel-6 is a bunch of input and output wires which should satisfy any charging requirement.

Features:
Microprocessor controlled
Delta-peak sensitivity (NiMH/NiCd)
Individual cell balancing
Li-ion, LiPo and LiFe capable
Ni-Cd and NiMH capable
Large range of charge currents
Store function, allows safe storage current
Time limit function
Input voltage monitoring. (Protects car batteries at the field)
Data storage (Store up to 5 packs in memory)
Battery break in and cycling.

Spec.
Input Voltage: 11~17v
Circuit power: Max Charge: 50W / Max Discharge: 5W
Charge Current Range: .1~6.0A
Ni-MH/NiCd cells: 1~15
Li-ion/Poly cells: 1~6
Pb battery voltage: 2~20v
Weight: 355g

This charger has a JST-XH charge plug, which makes it compatible with Zippy, HXT, TURNIGY and any pack with a JST-XH adapter.

Note: Power supply not included.

VK

Got the battery in good condition.Thanks for your best support.

Its my pleasure.
Thanks
Vivek Kumar Singh
9718534313

E Max CF 28-12 Brushless Outrunner 1534kv have been restocked



Now you can also buy at stores.ebay.in/rc-electro

VK Sir,
You have the Red Brick 30A ESC's listed on your website.

I desperately want one.
But the thing is there are two versions of that ESC, the old ones which have the blue motor wires, and the new ones with black wires.

The new ones suck.
I was using the old ones on my copter and burned one, I have already ordered one form hobbyking but they are the new ones.

What I want to know is, do you have the new or the old ones, because your ebay listing shows the new ones whereas the website shows old ones.
Can you check and tell me?
It would be a great help.

Pushpreet Ji
I have new ones.

Thanks
Vivek Kumar Singh
9718534313

USBasp AVR Programming Device for ATMEL processors Adapter 10 Pin Cable-Free Shipping- Click here to BUY NOW

Ah. Thank you anyways.

Sir do you have the Turnigy 2200mah 3S 20C Lipo Packs in stock? Your site says out of stock.

Ya it is out of stock.

Could you let me know when they will be restocked? I will require 2.

Regards Ashim.

It will take one week at least.

Thank you sir.

Regards Ashim.

Sir we really thank you to import this stuff to india and sell it hatsoff to you

VK Sir are you getting any 9ch TX/RX set..

 Weekend Discount Sales from 20-12-2013 to 22-12-2013

Hobbyking KK2.1 Multi-rotor LCD Flight Control Board With 6050MPU & Atmel 644P Click here to BUY NOW

Turnigy Multistar 20 Amp Multi-rotor Brushless ESC 2-4S - Click here to BUY NOW

HexTronik DT700 Brushless Outrunner 700kv- Click here to BUY NOW

Afro ESC 20A Multi-rotor Motor Speed Controller SimonK Firmware (Pack of 4 ESC)- Click here to BUY NOW

Q450 Glass Fiber Quadcopter Frame 450mm - Integrated PCB Version- Click here to BUY NOW

are u getting any 9ch Tx/Rx  ...

Sir what about my order?
You arent responding.