HI
I am interested
Thats going to be an excellent price for arf
wts the price for rtf

@umeshk sir,
i already posted the price of RTF model

Hi RC Maker

I have sent you a PM,

PS
are you Ambattur or Thiruvotriyur(I lived here for a while, near Theradi)

RC Maker, you have mentioned Undercarriage, but have not given any indication of price or availibilty. Also, how will this affect the weight and flying characteristics?

@rcpilotacro ,
im staying near tambaram

@sanjayrai55 ,
basically trainer model dont need landing gear
anyway i give the link
price of landing struct (50) http://aeroworks.co.in/store/index.php?id_product=188&controller=product
2 x wheel (300) http://aeroworks.co.in/store/index.php?id_product=182&controller=product
this is not included in the total price.
because this is not included in the package

Thank you RCM. What is the height of that Landing strut? Will the prop clear adequately? What about the nose wheel/Tail Wheel?

What will be the impact of the additional weight on flight performance?

I feel you have made a great looking model, and am sure it will fly as well as it looks. Wish you all success, there are many, many modellers who need something like this with the toughness of corro, and the affordability

@sanjayrai55 ,
you can use it taildragger as well as tricycle type
this model will capable flying with or without landing gear, because i have already test flown the model with and without landing gear,
landing gear weight is appox 100g only
so the total weight of the model with landing gear is 700g only,
we have recommended 930g thrust motor so dont worry about
thanks for your inquiries

My plane with landing gear
krish flyer

Looking good

Post the video soon! Is this 3 mm corro?

@sanjayrai55,
except tail part all parts made by 3 mm coro only
tail part is 5mm coro
as soon as possible i will upload the video

Let me know how many of them need this plane,you just inform me before three days
because i need 3 days to finish the single plane

Similar Coroplast Trainer Model in RTF condition will cost approx 10K ( with UMS 25 Glow Engine). Contact sales@umstech.in

@ramaraj,
im selling only electric models

Dear RC Maker

What would be the shipping charges to Coimbatore ?. I would like to have one .

for ARF model shipping is around 300

Please try to use the EMS speed post for the major city delivery, as this way shipping cost will be not more than 150-170. this will be economical but still fast delivery solution.

@anandparanjape sir,
im shipping by fedex this is safer one
i have no idea about that EMS speed post is safer or not

i never had bad exp. with speed post for any of metro's. if packing is well, then it won't damage in speed post too . i suggested the speedpost as the model is economical, then shipping too must

let me know i will ask shipping detail to my nearest post office
thank for your information and supports

This is my bank account detail, anybody want means
let me know before transfer you just inform me
Bank: IDBI Bank
Account Name: K.Krishnamoorthy
Account Number: 907104000055426
Branch: SKPAS COLLEGE EXTN COUNTER
IFSC Code: IBKL0000907

I think you have selected the motor with a only 2s battery , that will give you some less power. You should go for at least 3S battery.

You may use some cheap power plant (but effective one).
2812 Motor (480)
Prop Adapter(30/-)
Prop 7x6 (45/-) but you should order 3 at least if you are a newcomer.
20A HK ESC (450/-
4 x 9gm Servo (4x160/-)
1000mAh 3S 25C Battery (Flightmax for 510/-)
JST Male connector for 5/-
or T connector (Male -Female pair for 25/-)
All rates from vineet's website i. e.  www.hobbysea.com

And you use very high powered engine for
Donkey motor 3007 (1100kv 3S 280watt, 1200gm thrust - 730/-)
3mm prop adapter -30/-
10x6 prop  60/- (you may need more than one)
40-50A ESC (Red Brick 50A - 730/-, HK40A - 720/-)
Turnigy 2200mAH 3S 25C battery - 890/-
XT60 male connector 25/-
Bullet Connector (if you wont solder) - 3.5mm gold (20/- x 3 nos)

Please use the later one for more than 700gm AUW, All setup will give you vertical, Battery should be covered with foam and tightly fixed with Airframe, otherwise, it will change CG in mid-flight and flight characteristics will be changed.

What is your Airframe weight ?
for those wants to make their own SPAD can check the thread
http://www.rcindia.org/electric-planes/spadmania-scalling-down-for-electric-2nd-cub/

@KALYANPRODHAN sir,
sorry sir i have wrongly uploaded, its 3s lipo cell
arf model weight is almost 350g
the electronics i buy from shop that is nearer one for me and also cheaper one
you have posted one website,that is nice one. but i have to wait for some days to get the materials
anyway thanks for your information and supports sir

Was a flight video ever posted ?  Isn't that important before buying something ?  Looks like it was inadvertently missed.

Yes even i was thinking the same +
the details...
How aerofoil shape is given,
Any type of wing spar for strength
Motor Firewall,
Servo fixtures and push rod connectors,
battery compartment,
what material used to stick coro or its just taped
some of the things which make a plane durable and sturdy.

In my personal view i would like to know these before buying.....

I would suggest you put the recommended items and then post the AUW, flight video, and other items else the person buying will keep trying all sorts of stuff and on failure will blame your model.

So in order for you to be successfull.... Fix the stock configurations.... people should not be advicing on less power motor etc.

Its a trainer plane not a 3D and you are the best judge to suggest best power system supported with a video... if you do not know how to fly well... ask an expert to fly.....

.... some tips to be a successfull in selling an RC model.