RC India

Hi,
I have a lot of stuff I need to sell(kits, radios, helis, motros, escs etc.... )I will be adding more stuff and keep on updating the list of things constantly. Please reply here or send me a PM if you want to buy something or have a question.All prices exclude shipping. Will accept Paypal, money order, cheque or bank transfer. Will ship only after realization of payment. I will prefer LPU in Mumbai. Discount will be provided for group purchases.


1. Hobbico 3 ch 72Mhz  AM transmitter w/ receiver (ch 40)       1500/-
Condition: used, in excellent working order. Uses dry cells for power. Battery holder included.

2. JR F400 4 channel tx (no rx, no crystal)       1800/-
Condition:used, in excellent working order. Will include 8 cell rechargeable battery.

3. Hitec Laser 4 channel tx (no rx, no crystal)       2000/-
Condition:used, in excellent working order. Will include 8 cell rechargeable battery.

4. 380 sized Brushed motor.      50/-
Condition:used, in excellent working order. Has power capacitors and diode soldeded on.

Please book the motor for me. Where can I find receivers for the all TX's?

5. 89mm Ducted Fan unit/w motor
Condition: Brand new.                    1400/-

6. Dctrum 40A brushless esc
Condition Brand new.                     900/-

Hi VC,

Sure. I'll book the motor for you. I have receivers and crystals too. In the process of listing them.

7. Hitec electron 6 dual conversion 6 channel receivers (positive shift)    1200/- each
Condition: used. in excellent working order .

8. JR R600 and JR NER226X 6 channel receivers (positive shift)    1100/- each
Condition: used. in excellent working order .
one of the receive has a small nick on the antenna wire but it does not effect the performance will sell that for 1000/-. can provide detailed pictures upon request.

9.Futaba FP-R127DF 7 channel dual conversion Rx                      1100/-
Condition: used. in excellent working order .

10. FMA Direct Fortess 2000 8 channel rx (Universal shift)              1500/-
Condition: used. in excellent working order .

11. Brushless motor from phase 3 models p-38. I do not have the specs on this.           450/-
Condition used, in excellent working order. It is similar to 2212-10 motor.Please ask if you have more questions.

12. Hangar 9 ULTRACOTE roll ( Metallic gold HANU 879)               900/-

Condition Brand New.

13. Trex align sport V3 clone all metal kit.      3500/-
Condition brand new. The image does not show the landing skids and main blades but a set of carbon main blades and landing skids are included.

How much kv motor. some more details plz

cn u please tell me which of these rx can be bound with sanva airtronics sd6g

As  have already said before I do not know the specs of the motor.The motors should be in the 1400~1500 kv range. its more popularly known as EMI Gold Fly II motor. here is a link of he motor in action.
http://www.youtube.com/watch?v=GrMDVL7E3lU&feature=player_embedded    .It is a very powerful motor for its size!!

airtronics sd6g is a 2.4 ghz radio. These receivers are fm 72mhz. They are not compatible with your radio.

If anyone wants to buy a complete radio system (ie, tx + rx) I will be willing to offer a good discount.

14. Guts from a parkzone Champ     3000/-
Condition: used, in excellent working condition. The fuse in the picture will be included for free  if anyone wants it. A prop will be included too.great for all your micro DIY projects.

hi,

book the Trex align sport V3 clone all metal kit.      3500/-

what size blades are included?

pm bank details.

regds
sandeep

Sure, Align (clone) helicopter kit booked for Mr. Sandeep. Will pm bank details in a bit. 325mm blades will be included. Will put up pictures of the same.

Pictures of the blades have been uploaded.

15. Turnigy Accucell 6 charger           1900/-
Condition: Brand New.

16. Multiplex LN-2010 Charger         1300/-
Condition Used, in excellent working order. This charger is one of the best chargers that I have used till date. Made in Korea. It will charge nicd/nimh and lipos upto 4S with max charging current of 2 Amps.

17. Hobbico Quick peak tx/rx charger          500/-
Condition: used, in excellent working order. Will be a great Add on to your field box.

18.  FrSky V8HT 2.4Ghz DIY Module        1000/-
Condition: Brand new.  can be used to convert one othe the radios available above to 2.4ghz. Will provide some discount if purchased along with a radio.

19. Tower pro BM2409-18 motor.      150/-
Condition: Used, works fine.

I 'll take the frsky diy module

pls pm the the relevant details
 

Hi,

I am interested in 15. Turnigy Accucell 6 charger.
is it this one?
http://www.hobbyking.com/hobbyking/store/__7028__Turnigy_Accucel_6_50W_6A_Balancer_Charger_w_accessories.html

PM send for motors

Yes it is the same one. Let me know if you are interested.

Pm replied. Still available.

Sending pm for frsky module.
Thanks

20. Micro tele master kit from hobby-lobby (manufactured by aerocraft rc)             3000/-
Condition: Brand New. This kit has been manufactured by aerocraft rc and is no longer available from hobby lobby.You can see the specifications  here (http://www.hobby-lobby.com/micro_telemaster.htm)

I'll take # 19, the Tower Bell motor if it is available.

Ok, managing pm's and posts is getting a little confusing for me. I will update the list of what all is available shortly. regarding the tower pro motors, I have two and so far three people have offered to buy them in the following order.

1.anandparanjape
2.vc
3.mubarakmohd123

One of the motors is missing a c-clip and the other does not have bullet connectors. I will try to include the c clip but cannot gurantee it. Preference will be given to the members in the order mentioned in the list above. I will hold the item for 2-3 days and if I don't receive the payment or atleast a receipt of payment I will pass it on to the next member on the list. So please confirm here if you want it and I'll pm the payment details.

Both the align clone 450 kits have been booked.
The brushed motor and one tower pro motor booked for VC, awaiting confirmation.
The DIY Frsky module has been booked for Saikat.

Motors confirmed Angad.

Sure VC, sending you a PM with my bank details.

Any other kit or ARF available except Micro tele master kit from hobby-lobby??

Nope, But I do have arf's. Tucano electric by Phoenix models (BNIB) and the great Planes Mini Super sportster EP (Airframe only, will need to be covered. Used)

21.  Gyros  (pick any)                      600/- each (except for the Turnigy 302 (http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=8471) and telebee which I will sell for 850/-)
Condition used, in excellent working order.

great Planes Mini Super sportster EP is new or used Airplane?

Its used, The plane consists of just the balsa frame, it will need to be covered. I don't think it will be possible to ship.

One turnigy 302 Gyro Booked for VC!

PM sent.

PM replied.

Sent again  ;)

Please book Turnigy Accucel-6 50W 6A Balancer/Charger w/accessories

Still interested in #19. Will take it at any condition....

Turnigy accucel booked for poporing2
tower pro motor booked for mubarakmohd123.
Will send a PM to both of you with my bank details.

I will now include a 6 ch receiver for free with radios no. 2 & 3 listed in my first post.

Sent you a PM on the Gyro.

Are u willing to sell your Radio no. 2 and 3 listed in your first post with Reciever and Pair of crystal for both Tx and Rx or Only (Tx and Rx), Do u also have the original box of the Transmitter (Laser 4).

I have crystals, I can provide at extra cost. I don't have the original box. The laser 4 is almost brand new and has features like ATV, V-tail mixing and Low battery alarm. That is a very good price for a quality 4 channel tx. I am including a free receiver only because I received a lot of pm's from new commers who wanted to buy the radio but could not afford it. I can't go any lower than this.

Thanks

Confirming the Brushed motor and the Turnigy Gyro. I don't want the Towerpro bell motor or the HK Gyro.

Regards.

So, what is the extra cost of the crystals.. for both Tx and Rx..

hi is the charger LN2010 still available

I bought them for $12.00 + shipping each. I will be willing to sell the pair along with the radio for  :Rs:500.

Yes, it is still available.

There is only Rx crystal as i saw in the image... Tx crystal of same frequency is also included in this deal?

Yes, As of now I have only one matching set for the JR on channel 35. For the Hitec I only have the tx crystal on channel 51. I will sell that for :Rs: 250 along with the radio.

hi is tower pro motor still available ?

Awaiting confirmation from mubarakmohd123. If he wants only one then I'll give you the second one.

angad i have send you pm for the bell motor. :)

Swizera, I have not received any PM from you for the bell motors.


Payment for the Frsky DIY module received (sold)

Also prices for the 89mm ducted fan with motor and 40A esc have been amended.

Plz book 1 tower pro bell motor for me.
this was my Pm angad.  :)

Can u plz book 1 for me .

1 bell motor confirmed.  :Rs:210 deposited... I will pm you my details.

-Cheers

All the items listed here exclude shipping. Buyers transferring money please make note of this.

Money for one tower Pro received. Thanks. One more available

Multiplex LN-2010 charger Sold

The other tower pro I have is missing a c-clip though.

21. Great Planes c-10 micro brushed esc.         700/- for both shipped.
Condition: one new one slightly used.

22. ZIPPY Flightmax 700mAh 6.6V 5C LiFePo4 Reciever Pack       300/- for both
Condition: one new one used. the used one has been cycled about 10 times.

I am interested in the accucell charger let me have your acc details and Shipping charges.
Check PM. You have to ship to Gurgaon ( Delhi).

Regds
saurabh Rastogi

book zippys and esc for me,bell motor also if available

I have the zippys but some one has asked for the esc. I will wait till tomorrow, if I don't hear from the concerned person by then you can have it.



Note:- First batch of all orders, for which I have received the money will be shipped out tomorrow. Concerned members will be notified.

PM Sent for the Telemaster.

book the zippys for me then and what about the bell motor

hi,

kindly book the multiplex charger also.

regds

sandeep

Multiplex charger has been sold.

Bell motors have been sold, zippys still available. Let me know.

Pm replied. Still available.

Accucel charger has been spoken for. I'll keep you in mind incase the buyer backs out.Thanks!

The phoenix tucano EP and Props listed here (http://www.rcindia.org/for-sale/radio-arf-charger-loads-of-props-for-sale/) are still available.

Hobbico 3-ch tx/rx SOLD.

Micro tele master kit from hobby-lobby (manufactured by aerocraft rc)   
Sir, i am new to this form and this is my first post pardon me for any mistakes i am from thane and want this
kindly Pm me.

Sent you a PM.

Payment made for 15. Turnigy Accucell 6 charger.  :Rs:

Waiting for seller to ship it.

Turnigy Accucell 6 charger received.

Nicely packed  :) NIB condition as mentioned

Thanks, looking forward to deal with you again  :thumbsup: :thumbsup:

Here is the list of stuff still available for sale. Have revised prices of some items.


1.JR F400 4 channel tx (with rx & crystal for tx/rx)                 1900/-
Condition:used, in excellent working order. Will include 8 cell rechargeable battery.

2.Hitec Laser 4 channel tx (with rx & crystal for tx only)      1800/-
Condition:used, in excellent working order. Will include 8 cell rechargeable battery.

3.89mm Ducted Fan unit with Brushless motor    1350/-Condition: Brand new.

4.Hitec electron 6 dual conversion 6 channel receivers (positive shift) 800/- each
Condition: used. in excellent working order.

5.JR R600 and JR NER226X 6 channel receivers (positive shift) 800/- each
Condition: used. in excellent working order .
one of the receive has a small nick on the antenna wire but it does not effect the performance will sell that for 700/-. can provide detailed pictures upon request.

6.Futaba FP-R127DF 7 channel dual conversion Rx 900/-
Condition: used. in excellent working order .

7.FMA Direct Fortess 2000 8 channel rx (Universal shift) 1000/-Condition: used. in excellent working order .

8.Hangar 9 ULTRACOTE roll ( Metallic gold HANU 879) 800/-
Condition Brand New.

9.Trex align sport V3 clone all metal kit. 3500/-
Condition brand new. The image does not show the landing skids and main blades but a set of carbon main blades and landing skids are included.

10.Parkzone Vapor Ember 2 Champ ESC/Receiver ESC/Rx RC Airplane Ultra Micro PKZ3351 (Guts from a parkzone Champ) 2800/-
Condition: used, in excellent working condition. The fuse in the picture will be included for free if anyone wants it. A prop will be included too.great for all your micro DIY projects.

11.Hobbico Quick peak tx/rx charger 400/-
Condition: used, in excellent working order. Will be a great Add on to your field box.

12.Micro tele master kit from hobby-lobby (manufactured by aerocraft rc) 3000/-Condition: Brand New. This kit has been manufactured by aerocraft rc and is no longer available from hobby lobby

13.Gyros (pick any) 600/- each (except for the telebee which I will sell for 850/-)
Condition used, in excellent working order.

14.Great Planes c-10 micro brushed esc. 650/- for both shipped.Condition: one new one slightly used.

15.ZIPPY Flightmax 700mAh 6.6V 5C LiFePo4 Reciever Pack 250/- for both
Condition: one new one used. the used one has been cycled about 10 times.


Feel free to post here or pm me if you have any questions. Make offers but no low-balling. Will list more stuff in some time.

Money already deposited for item # 13 (Turnigy Gyro) - please edit post.

Edited

Zippys (no. 15) booked for girishsarwal pending payment.

Tower pro BM2409-18  received. Nice packing............ :salute: :salute: :thumbsup:

Thanks for the update. :)

payment made for batteries.

Payment received. Both Zippys SOLD

is item no. 1 available?

Yes it is :)

14.Great Planes c-10 micro brushed esc. 650/- for both shipped.Condition: one new one slightly used.  SOLD

Turnigy 2836-3700 motor and turnigy sentry 40A esc         1500/-

condition used, in excellent working order. Excellent power combo for a 450 sized heli. Has all connectors soldered on. This power system has only been used a couple of times. the pinion gear (13T) has been attached to the motor shaft.

Futaba Conquest FP-T5NLH transmitter only.                              1500/-
Condition used, in excellent working order. you will not find another one in better condition. Here is a link to the manual:
http://manuals.hobbico.com/fut/5nlh-manual.pdf
buy this along with the futaba 7 channel rx listed here for sale for 2500/- (channel 39 crystal set will be inculded).

Complete EXI 450 rotor head assembly (all metal) with Align main shaft.         1050/-
Condition used, in excellent working order.

Aling T-rex 450 sport V3 clone Complete main frame assembly (FG + metal)            1450/-
Condition New. There is a small nick on the frame (on the bottom right hand corner where the frame meets the base plate). This does not affect flight performance and has been re-enforced with epoxy. You will have to look a it closely to even notice it. The anti rotation bracket and canopy mounts are not pictured but will be included.

Hacker E10-36L Motor and Castle Creations Phoenix 10Amp esc.          2500/-

Condition: motor is brand new and the esc has been slightly used. For complete specifications of the motor please visit this link:

http://www.hacker-motor-shop.com/e-vendo.php?shop=hacker_e&SessionId=&a=article&ProdNr=45716003&t=3&c=2577&p=2577

I really don't expect much interest in this combo considering the price tag. This is a German made motor and the ecs is made in the US. You can check the price tag on the motor.

Will be listing more stuff soon...

If anyone wants to buy the three remaining radio sets (JR F400, Hitec Laser 4 and Futaba 5 Channel) I will sell them as a package for 4600/- + shipping  :o :o :o . That's 3 complete radio sets  (tx + rx) for 4600.

got the batteries, all well an neatly packaged.

Updated List (8-29-2012). Have revised prices of some items.


1.JR F400 4 channel tx (with rx & crystal for tx/rx)                1800/-
Condition:used, in excellent working order. Will include 8 cell rechargeable battery.

2.Hitec Laser 4 channel tx (with rx & crystal for tx only)      1700/-
Condition:used, in excellent working order. Will include 8 cell rechargeable battery.

3.89mm Ducted Fan unit with Brushless motor    1300/-
Condition: Brand new.

4.Hitec electron 6 dual conversion 6 channel receivers (positive shift) 800/- each
Condition: used. in excellent working order.

5.JR R600 and JR NER226X 6 channel receivers (positive shift) 800/- each
Condition: used. in excellent working order .
one of the receive has a small nick on the antenna wire but it does not effect the performance will sell that for 700/-.  
can provide detailed pictures upon request.

6.Futaba FP-R127DF 7 channel dual conversion Rx 900/-
Condition: used. in excellent working order .

7.FMA Direct Fortess 2000 8 channel rx (Universal shift) 1000/-
Condition: used. in excellent working order .

8.Hangar 9 ULTRACOTE roll ( Metallic gold HANU 879) 750/-
Condition Brand New.

9.Parkzone Vapor Ember 2 Champ ESC/Receiver ESC/Rx RC Airplane Ultra Micro PKZ3351 (Guts from a parkzone Champ) 2700/-
Condition: used, in excellent working condition. The fuse in the picture will be included for free if anyone wants it. A prop will be included too.great for all your micro DIY projects.

10.Hobbico Quick peak tx/rx charger 400/-
Condition: used, in excellent working order. Will be a great Add on to your field box.

11.Micro tele master kit from hobby-lobby (manufactured by aerocraft rc)    3000/-
Condition: Brand New. This kit has been manufactured by aerocraft rc and is no longer available from hobby lobby

12.Gyros (pick any) 600/- each (telebee and turnigy no longer available)
Condition used, in excellent working order.

13.Great Planes c-10 micro brushed esc. 650/- for both shipped.Condition: one new one slightly used. (booked, awaiting payment)
 

Feel free to post here or pm me if you have any questions. Make offers but no low-balling.

Trex align sport V3 clone all metal kit. 3500/-
Condition brand new. The image does not show the landing skids and main blades but a set of carbon main blades and landing skids are included.

i m interested let me know where do u live and i drop by

All helicopter kits have been SOLD

All three radios have been SOLD

Adding last few items I have left for sale.

Birch Ply (1/8X4X12") Made by Revell inc.       300+shipping

Hobbyzone DC quick charger for 1S lipo  (new)        350+shipping

pm sent

Hi woud like to take the birch ply.

Sure, I'll go ahead and book the Birch Ply for you then.

Hello, I would like to buy this radio if it's still available, PM sent:

All three radios have been spoken for. I'll let you know if things change.