Hi everyone.
This is the last time i am posting this ad for this truck.
The truck is used but in pristine condition. No breakage or wear and tear whatsoever.

Its hobbyking /turnigy 2wd Shortcourse truck.
All spare parts are available at throwaway prices at HK and are in stock from the last 1-2 years.

http://hobbyking.com/hobbyking/store/__20558__Turnigy_SCT_2WD_1_10_Brushless_Short_Course_Truck_ARR_.html

Features:
Adjustable camber, caster and shock mounting positions
Low center of gravity chassis design
Pre-installed 35A brushless power system
Large front/rear and side impact bumpers
Soft compound tires for increased traction
Pre-painted and trimmed body shell w/decal sheet included
Specs:
Motor Size: 3650 Brushless inrunner
Motor KV: 3300KV
ESC: 35A ESC (with Reverse)
Battery: 2~3s 4000MAH LiPo (Required)
Battery compartment: (195x49x21mm MAX SIZE)
Servo: High-Torque Steering Servo
Length: 530mm
Wheelbase: 330mm
Height: 200mm
Ground Clearance: 41mm

Required: 2.4G Radio

Deal Includes-

Car
2 x 5000mah Lipo (Hardcase)
1 x Charger (Basic charger, uses balancing port)
1 x Used Electric Screwdriver
3 x Spur Gear
2 x set of 4 suspension arms (2x4=8 arms)
Shock Oil (200 cst)
8 x Nimh AA rechargeable cell for Remote.
Charger for AA Nimh cell

Car runs perfectly on each battery pack for about 20 mins

Price=   :Rs:5000/-
No negotiation.

I have reinforced the body shell with some fibre tape and also covered the batteries with those fibre tape to prevent wear and tear.

Thanks

Pics

More.
Once the deal is finalised, i will post a video of the car and the other inlucded stuff to have a final look before payment.

ready to run??

you would need a RX/TX

is it Water proof ??

Nopes.

Sold!