|
Title: Stock Added- Flight Controller Post by: funaster on May 12, 2014, 05:40:01 PM Flight Controller DJI NAZA M LITE plus GPS Combo for Multirotors (http://i61.tinypic.com/2pqno5f.jpg) Naza-M Lite Features All-in-One Design Advanced attitude stabilize Algorithm Multiple flight control mode/intelligent switching GPS Module Available/Accurate Position hold Intelligent Orientation Control (IOC) Failsafe mode Low voltage protection Motor Arm and Motor Dis-arm Support Futaba S-Bus and PPM receiver Supported multi-rotor types NAZA M V2 (http://i57.tinypic.com/311tbg6.jpg) Features All-in-one Design Nine Types of Multi-rotors Supported Free Ground Station Function New Assistant Software for Smartphone Independent PMU with amazing function extension Enhanced Failsafe Mode Two Levels of Low Voltage Protections Multi-rotor One-power Output Fail Protection Advanced & Improved Attitude Stabilization Algorithm Multiple Flight Control Modes/Intelligent Switching You can place your order: http://rchobbyaddict.com/product_info.php?cPath=56_93&products_id=704 (http://rchobbyaddict.com/product_info.php?cPath=56_93&products_id=704) Title: Re: Stock Added-DJI Flight Controller Post by: funaster on May 29, 2014, 12:07:34 PM DJI NAZA M V2 @ Rs 23400(including taxes, free shipping)
Title: EV PEAK BATTERY NOW AVAILABLE Post by: funaster on May 31, 2014, 03:49:26 PM It is a quad AC/DC charger, it could charge four packs of batteries at the same time and disply data of each port singly.
With two independent output and temp port, two cooling fans could help charger cool down efficiently. With AC/ DC input , two independent output and temp port . In temp port you could connect charger and PC with USB software kits to monitor and analysis battery performance completely. (http://rchobbyaddict.com/images/Q6320AC-1.jpg) FEATURES 1.Create a safe charging condition and maximum reduce the danger caused by negligence or setting error of user. 2.High efficiency up to 90%. 3.Accept all types of R/C batteries: LiPO/LiFe/NiMH/NiCd/Pb. 4.Easy to operate. 5.It can monitor and balance each cell of the pack individually ( tolerance ±0.01V). 6.Accept individual battery charging/discharging.Various of charging mode to meet different demand. 7.Perform 1-6 cycles of charge>discharge or discharge>charge continually for NiMH/NiCd refreshing 8.PC program, you can analysis the characteristic of the battery by USB port. SPECIFICATION AC Input voltage- 110or220V DC Input voltage- 11-18.0V Charge power- max.80W*4 Discharger power- max.10W*4 Charge current range -0.1-8.0A Discharge current range- 0.1-2.0A Balance tolerence- ±0.01V NiCd/NiMH battery cell count- 1-15cells LiPo/LiLo/LiFe battery cell count- 1 - 6series Pb battery voltage- 2 V - 20V Digital Power- 3V - 24V |