RC India

A SUPER SALE on some of the most coveted items for DIY Enthusiasts & Hobbyists

1) ARDUINO pro mini (5V/16mhz) : 10pcs, INR 200 per piece

Atmel AtMega328P AU MCU
14 Digital input / output port: RX, TX, D2 - D13
8 analog inputs: A0 - A7
1 pairs of ports TTL level serial transceiver: RX / TX
6 PWM ports: D3, D5, D6, D9, D10, D11
Support for external 3.3V - 12V DC power supply
Clock frequency: 16MHz
Size: 33.3 x 18.0mm
Circuit logic voltage: 3.3 V
Standard power supply: 5V

By Default it is DIY Version so terminals are un-soldered and without arduino bootloader.

CH340G Converter also available : 10Pcs, INR 100 per piece

2) STM32 F103C8T6 Development board : 5pcs, INR 350 per piece

Model: STM32F103C8T6.
Core: ARM 32 Cortex-M3 CPU.
Debug mode: SWD.
72MHz work frequency.
64K flash memory, 20K SRAM.
2.0-3.6V power, I/O.
Reset(POR/PDR).
4-16MHz crystal.
On-board Mini USB interface, you can give the board power supply and USB communication.
Size:5.3cm x 2.2cm.

3)KKmulticopter V5.5 controller Board with USBasp Programmer : 5sets, INR 850 per set

1. Simple structure, Easy to Maintain and Debug Control
2. with 3 pcs gyros, relying on potentiometer adjust gyro sensitivity.
3. Full servo signal output, support normal ESC / analog servo
4. Support for single-axis / UFO, Y3 3-axis, Y3-type 3-axis, 4 axis, 6 axis, V22 flight mode
5. Supports 4-axis "+" and "X" flight mode, support for six-axis "HEXA6" and "Y6" flight mode.
6. Don't need MK 4-axis PPM decoder board, the receiver can be connected directly to the Transmitter.

4)CC3D Openpilot Open Source Flight Controller : 2sets, INR 1600 per set

Powerful STM32 32-bit microcontroller running at 90MIPs with 128KB Flash and 20KB RAM
3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer
Tiny 36mmx36mm 4 layer PCB for superior electrical noise reduction and flight performance.
Software support for Windows, Mac and Linux
Direct high speed USB support with no drivers required, a truly plug and play device.
Spektrum satellite receiver support
Futaba S-BUS hardware support
Innovative Flexi-port technology for superior port flexibility
4Mbits on-board EEPROM for configuration storage

5)GY 521 ( MPU-6050 ) 6DOF Module : 5pcs, INR 250 per piece

The power supply: 3-5 v (internal low voltage difference voltage stabilizing)
Communication: standard IIC communication agreement
Chip built-in 16 bit AD converter, 16 bits of data output
The gyroscope range: + 250 500 1000 2000 /s
Acceleration range: 2 4 8 16 g
Specifications:
Size:about 21*15*1.2 mm(max)
Net weight:3 g
Color:Blue

6)BMP 180 Digital Barometer : 5pcs, INR 200 per piece

1.8V to 3.6V Supply Voltage
Low power consumption - 0.5uA at 1Hz
I2C interface
Max I2C Speed: 3.5Mhz
Very low noise - up to 0.02hPa (17cm)
Full calibrated
Pressure Range: 300hPa to 1100hPa (+9000m to -500m)
Weight: 5g
Size: 21mm x 18mm

7)HMC5883L Triple Axis Compass Magnetometer : 5pcs, INR 180 per piece

Power supply: 3-5v
Communication mode: IIC communication protocol
Measuring range: + 1.3-8 Gauss

8)ADXL335 & ADXL345 Accelerometers : 5pcs, INR 200 per piece

Power supply :3-5v
Communication : IIC / SPI communication protocol
Measuring range : ± 2g ± 16g
3-axis , ± 2g / ± 4g / ± 8g / ± 16g

9)NRF24L01+ Wireless Module 2.4G - 200m range (Low power) : 10pcs, INR 90 per piece

NRF24L01 is a work in the 2.4-2.5GHz worldwide ISM band single-chip transceiver, wireless transceiver, including: the frequency generator the enhanced SchockBurstTM mode controller power amplifier crystal amplifier modulator demodulator output power channel selection and protocol set by the SPI interface to set a very low current consumption, lower current consumption mode 12.3mA Power-down mode and standby mode when in transmit mode emission power 6dBm when current consumption is 9.0mA acceptance model.
Ball to open ISM band maximum 0dBm transmit power, license-exempt use. The open 100 meters!
Support six channels of data reception
(1) low operating voltage: 1.9 ~~ 3.6V low-voltage
(2) high-rate: 2Mbps, air transmission time is very short, greatly reducing the wireless transmission of collision phenomena (software settings 1Mbps or 2Mbps air transmission rate)
(3) Multi-frequency points: 125 frequency points, to meet the multi-point communications and frequency hopping communications needs
(4) ultra-compact: built-in 2.4GHz antenna compact 15x29mm (including antenna)
(5) Low power consumption: when in answer mode communication, fast air transmission and start-up time greatly reduces the current consumption.

10) NRF24L01+PA+LNA SMA Antenna 2.4G - 1.2kms range (High power) : 5pcs, INR 350 per piece

NRF24L01P + PA + LNA Division I for the ultra-long-distance data transmission specially developed high-power and high sensitivity wireless module 2.4G ISM band NRF24L01P + PA + LNA wireless module to work in the license-free, can be point-to-pointapplications, can also be composed of a star network,
NRF24L01P + PA + LNA wireless module core Norway NORDIC company's latest high-performance wireless
Digital transmission chip NRF24L01 +, with the Division of Professional Design professional full two-way RF power amplifier high power PA and LNA chip, RF switches, bandpass filters, etc., makes effective communication distance greatly expand.
RF part, the Secretary has done a lot of optimization matching debugging, the emission efficiency to achieve the highest harmonic minimum
Makes NRF24L01P + PA + LNA wireless module of RF interference to the external equipment reaches a minimum, while not susceptible to interference from other devices, greatly Uploader
High stability of the work.

11) 433 MHZ RF Wireless Transmitter And Receiver Module : 10pairs, INR 75 per pair

Receiver module parameters:
1.Product Model: MX-05V
2.Operating voltage: DC5V
3.Quiescent Current: 4mA
4.Receiving frequency: 315MHz / 433MHz
5.Receiver sensitivity:-105DB
6.Size: 30 x 14 x 7mm
Technical parameters of the transmitter head
1.Product Model: MX-FS-03V
2.Launch distance : 20-200 meters (different voltage, different results)
3.Operating voltage: 3.5-12V
4.Dimensions: 19 x 19mm
5.Operating mode: AM
6.Transfer rate: 4KB / S
7.Transmitting power: 10mW
8.Transmitting frequency: 315MHz / 433MHz
9.Pinout from left → right: (DATA; VCC; GND)

12) Joysticks Dual-axis XY (Arduino compatable) : 8pcs, INR 100 per piece

Dual-axis XY Joystick Module for Arduino
Dimensions:
4 X 2.6 X 3.2CM
2 potentiometers for 2 axes
1 switch
Connector: +5Vcc - GND - VRx - VRy - SW

ALL ITEMS (Except Joysticks) ARE PACKED IN ANTI STATIC POUCHES AND SEAL PACKED. THESE ARE ALL AVAILABLE ON FIRST COME BASIS.

SHIPPING EXTRA ON ACTUALS

PLEASE PM ME TO BOOK THE PRODUCTS

Some more Pictures...

Some more Pictures...

Some more Pictures...

I will take the following:

CH340G * 1
Arduino Pro * 2
STM32 F103C8T6 Development board * 1
NRF24L01+ Wireless Module 2.4G - 200m range (Low power) * 2
NRF24L01+PA+LNA SMA Antenna 2.4G - 1.2kms range (High power)  * 2
433 MHZ RF Wireless Transmitter And Receiver Module * 4
Joysticks Dual-axis XY (Arduino compatable)  * 4

Please advise on the total amount incl shipping to gurgaon

hi,
i am interested in following
ARDUINO pro mini
GY 521 ( MPU-6050 ) 6DOF Module
NRF24L01+PA+LNA SMA Antenna 2.4G - 1.2kms range (High power) 2pc
 could you please quote for the same
also if local pickup in mumbai is possible
regards
sameer r p

Hi Girish,

CH340G * 1 - INR 100
Arduino Pro * 2 - INR 400
STM32 F103C8T6 Development board * 1 - INR 350
NRF24L01+ Wireless Module 2.4G - 200m range (Low power) * 2 - INR 180
NRF24L01+PA+LNA SMA Antenna 2.4G - 1.2kms range (High power)  * 2 - INR 600
433 MHZ RF Wireless Transmitter And Receiver Module * 4 - INR 300
Joysticks Dual-axis XY (Arduino compatable)  * 4 - INR 400

Your total works out to INR 2330

I will send u the bank details for the payment. You can make the payment once i confirm the goods are packed and ready for shipment.

Give me sometime to figure out the best shipping solution to your location and i will revert on that

Thank you

Hi Sameer,

ARDUINO pro mini - INR 200
GY 521 ( MPU-6050 ) 6DOF Module - INR 250
NRF24L01+PA+LNA SMA Antenna 2.4G - 1.2kms range (High power) 2pc - INR 600

Your total works out to INR 1050

Yes local pickup in Mumbai is possible, I reside at Malad and you can meet me here.

Cheerz

Hi I'm interested in buying two of number 2 and two of number 9 and two of number 10. Please tell me how much is total with shipping for Hyderabad. Thanks

need ch340g 1 piece only as got my pro mini shipped in april.

Hi,

@fxshoppe - ch340g stock exhausted. Arduino pro mini 4pcs available

@AshwinRwt - only 1 of no.2 and no.10 from ur list left with me for now. Total would be INR 650 and i will have to find out shipping to Hyd.

HAnzroh, please do let me know when you have a consolidated quote ready. I will need your bank account number

hi,

i shall take kk with usb lead 1 pc
and 3ccd 1 pc

pm bank details or whats app 9713000297

@Girish - Will chk with the courier company today.. Sorry i was a bit tied up

@Tintin - CC3D just sold but expecting another soon.. KK available... INR 950 for the set. Will have to work the shipping out and will send u bank details

My no. is 9820261848 on whatsapp

Please book 1 of number 2 and 2 of number 9 for me.

If any one wants to buy these at cheaper rate go to this
 https://www.robomart.com/buy-8051-controller-development-board-price-india