I have a lot of trainers lying around, and I don't fly them  

So I am selling off my Balsa built Trainers at cost and with each am giving a free model.

Local Pickup only - will not ship

Everything in Perfect Condition - Ready to fly, drop in your Rx. Can be sold with/without motor/ESC/Servos

1. Cloud Dancer:

http://www.rcindia.org/electric-planes/cloud-dancer-build-log/







FREE WITH THIS:

FT Spitfire made from Depron

http://www.rcindia.org/electric-planes/ft-spitfire-from-available-plans/

2. Piper Cub

http://www.rcindia.org/electric-planes/piper-cub-from-rcb-balsa-kit-for-2014-sweepstakes/





FREE WITH THIS

FT Baby Blender (Depron)

http://www.rcindia.org/electric-planes/my-first-foamy-scratch-build-baby-blender/

Sir ji .....price please

Red Swan

http://www.rcindia.org/electric-planes/red-swan-balsa-kit-from-rcb/





FREE WITH THIS

Corro Cub

http://www.rcindia.org/electric-planes/(yet-another)-avispad/125/ (Reply # 127)

Will post prices tomorrow

All these kits are from RC Bazaar. Price will be kit + covering material + Landing Gear (as applicable) and any electronics the buyer may want.

Sanjay sir, please if can sell coro cub seperately. I can collect from gurgaon

waiting for the prices   ...and sir which one is best for a beginner??   
regards
rohan

   

Rohan - Both Red Swan and Cloud Dancer are very good for a beginner. Red Swan has the characteristics of a Glider too, and Cloud Dancer can do some mild and simple aerobatics like loops, rolls, inverted.

Prices:

Cloud Dancer

Kit Rs. 3300 + 200
Covering Film : 600


Red Swan

Kit Rs. 2500 + 200
Covering film: 400
Landing Gear & Skid: 200

Piper Cub

Kit Rs. 2500 +200
Covering Film Rs. 400
Landing Gears: Rs 400
Wheels Rs. 300


If Servos (fitted) are required

9 gm Servo (HXT, E Max) Rs. 200 each
17 Gram Servo  Rs. 325 each
17 gram Metal Gear Rs. 450 each
9/10 gram Metal Gear (TGY) Rs. 350 each

Motors & ESCs : as per availability

Please note I do NOT sell Servos, motors ESCs. If they are fitted in a model, and I can spare them, they will be given at the prices above. The same applies for Servos, Landing Gear, Wheels etc. in the free models

I'm requested in first plane.. Dancer..
Things like ESC MOTOR SERVIS AND BATTERY I have Can you please tell me the specifications required if electronics and thus total price..

Radiocraft, in case you missed it - I will not ship. Has to be collected. You OK with that?

pushing off somewhere? back to hills?

Hi Sanjay sir, what will be required for the red swan apart from radio. I can collect from gurgaon

No Gusty sir. Need some place, and I don't fly trainers much nowadays. Scared they will develop Hangar Rash

You would need 4 servos 9 gram. I would recommend E Max or HXT, a Motor and an esc. There is a motor fitted which works fine, but the shaft needs to be changed (FOC !). Otherwise any 25 mm diameter motor, 150 Watts or more, and a 20 A ESC. Plus your Rx/Tx of course

whenever you do head back to hills let me know, we could hang gloves nearby

How come the interest has fizzled out? Something wrong with the offering?

Absolutely nothing wrong in offering sir.
Many may be fizzled out, due to Local pick up only.

But there is nothing more you can do,for an assembled model.

models are fantastic looking and built by one of the best in field ..... I am still thinking for red swan....

Thank you Saurabh 

Still open

As an option for those out of Delhi:

All 6 models, packing by professional, packing cost Rs. 1000 (it's more actually but I'll bear the difference)
For shipping, can book it by road transport, will take a week to practically any city in India, cost should be 500 or so.

Servos, Motors, ESCs etc at actuals as already outlined above

Bump!

Hey Fxshoppe...... I hope you are not talking about "The Coro Spad Cap 232".

It was spoken for some time ago.

Sanjay is waiting for the contract to be exchanged, funds transferred and possesion handed over.. ..

Sanjay please confirm..

 

Will give this free if all models are bought together

http://www.rcindia.org/for-sale/nib-hkpilot-power-module-with-t-connectors-and-6-pin-150mm-cable/

Bump

Hi Sanjoy. Which items are remaining ? I am ineterested in few. Would wear the cost of shipping.

All available. Shipping by road transporter estimated about 500 or so. Packing at about 1000 (all 6 models together)

Ok b

Booking all. Will continue over pm.

All items reserved for Subhash (wtg)

Subhash (wtg) has backed out after about a month

This sale is still on.

Can consider individual sets (of two - one balsa plus one Corro/Depron)

The Spitfire cannot be shipped as the wing is fixed. Instead of that I will give the FT Nutball

Preference still is for pick-up by buyer

First preference to a buyer who takes all together

Sir,

Please book red swan and core cub for me.

I am from mumbai, you will have to ship that.

you can PM me amount that i need to transfer. Please do not remove all server and motor and esc i will pay the cost to you.

Thanks & Regards
Rupesh Sidpara

Rupesh, please wait a few days

I also have to check regarding motor/esc/servos

Not an issue take you time..

Thanks

which are the models available right now?? What would be the total cost of all the remaining models taken in one go....

Please note these are fully built-up models, ARF, or Receiver ready if you take the electronics. They are NOT kits.

Summary

Item   Price   9 g Servo   17 g Servo   ESC 30A   ESC 40A   Motor   Total                       Cloud Dancer   4100   400   650      950   1200   7300 Red Swan   3300   800      850      0   4950 Piper Cub   3800   800      850      1150   6600                                            18850                       Packing   1000                  19850                                             Free Models:                                             FT Nutball                      CorroCub                      Baby Blender Bipe                                            Freight: At actuals

Bump

Still available

First preference to a buyer who takes all together

apart from sale
kindly intimate about  basic aeromodel training

further any software helps in aeromodelling

kp

Sahai, this is a For Sale Thread.

Please post your comments in the appropriate thread. This is NOT the first time you have done this. Kindly show restraint before this turns ugly, very ugly

Update: Red Swan sold locally

Cloud Dancer & Piper Cub still available, along with associated freebies

Still available

Bump

Yawn.......bump

spitfire? or nutball? price(with servos)

Please read the sale conditions. They are free (w/o electronics) with the balsa models

cant i buy them separately without balsa models?

@prabal276,
Since you are in Delhi, instead of queries, maybe you should just make a courtesy call on the BOSS...

Still open

 

Still available

Sirji, which are the available ones?

Ashok, I am not shipping. Only for collection

Still open

And have added now a PT 40 Nitro Trainer flown only twice (Kit Built from original Great Planes USA kit). This will need 5 standard servos, a 46 engine, and the radio. Price: Rs. 5000

http://www.rcindia.org/gas-glow-nitro-planes/pt-40-great-planes-kit-with-os-55-ax/

As mentioned before, I won't ship.

However I will ship under one condition only - All models (2 electric + 1 Nitro, plus freebies) in a single order. Packing and shipping charges extra (Will have to call professional packers, shipping will be by road freight)

Sale is compete. Everything sold