Title: Tower Pro Motors and Wheels Post by: vksingh on September 25, 2010, 08:42:05 PM 1. TowerPro Brushless Outrunner 2409-12T 1600Kv /200W---2Nos---Rs680/-each
Model: 2409 -12T Delta Weight: 64g Voltage: 10v (2~3 Cell lipo pack) Idle Current: 1.9A Kv: 1600 Shaft: 3mm Diameter Max efficient current: 23A Max Load: 25A Max Power Output: 200W Suggested Propeller: 8*4APC 8*5APC (http://www.hobbyking.com/hobbyking/store/catalog/TP2409-12T.jpg) 2. Brushless Outrunner TowerPro2409-18 1000kv / 180W---2Nos---Rs600/-each Model: 2409-18 Weight: 70g Voltage: 10v (2~3 Cell lipo pack) Idle Current: .9 Kv: 1000 Shaft: 3mm Diameter Max efficient current: 15.5A Max Load: 20A Max Power Output:180W Suggested Propeller: 8*.3.8 or 8*6 GWS Hyper Drive (http://www.hobbyking.com/hobbyking/store/catalog/TP2409-18.jpg) 3.Light Foam Wheel Diam: 55, Width: 18.5mm---10Pairs---Rs110/-per Pair (http://www.hobbyking.com/hobbyking/store/catalog/OR006-00108.jpg) Very well formed, light weight and firm, foam wheels. 4.Light Foam Wheel Diam: 25, Width: 12mm---10Pairs---Rs80/-per Pair Very well formed, light weight and firm, foam wheels. (http://www.hobbyking.com/hobbyking/store/catalog/OR006-00101.jpg) Note Shipping Extra@ Rs85/- through DTDC Contact Me @ 9560590589 Vivek Kumar Singh Title: Re: Tower Pro Motors and Wheels Post by: controlflyer on September 25, 2010, 09:03:04 PM Vivek! you are the best descriptive seller I've seen till date!!!
cheers mate!! Title: Re: Tower Pro Motors and Wheels Post by: vksingh on September 25, 2010, 09:03:41 PM Thanks a lot.
Title: Re: Tower Pro Motors and Wheels Post by: Manav_Ahluwalia on September 26, 2010, 12:42:23 AM Hey Vivek, Would you have MA 11x5 props in stock?
Title: Re: Tower Pro Motors and Wheels Post by: vksingh on September 26, 2010, 09:11:17 AM Hi Manav,
I do not have the MA 11X5 Prop, but I have GWS 11X4.7 Prop. Title: Re: Tower Pro Motors and Wheels Post by: vksingh on September 26, 2010, 09:31:15 AM One Brushless Outrunner TowerPro2409-18 1000kv / 180W Booked for Kasta Sir
Title: Re: Tower Pro Motors and Wheels Post by: vksingh on September 26, 2010, 09:33:16 AM 2 Pairs of Light Foam Wheel Diam: 55, Width: 18.5mm
and 2 Pairs of Light Foam Wheel Diam: 25, Width: 12mm Booked for Divay Title: Re: Tower Pro Motors and Wheels Post by: Manav_Ahluwalia on September 27, 2010, 02:22:36 AM Thanks Vivek, will keep that in mind. Cheers!
Title: Re: Tower Pro Motors and Wheels Post by: vksingh on September 27, 2010, 11:51:16 AM :headscratch:
Title: Re: Tower Pro Motors and Wheels Post by: tg on September 27, 2010, 06:43:06 PM Pls. update on stock availability.
Title: Re: Tower Pro Motors and Wheels Post by: vksingh on September 27, 2010, 07:27:02 PM Sir
Stock update on this sale has been updated in reply #5 & #6 Title: Re: Tower Pro Motors and Wheels Post by: vksingh on October 07, 2010, 09:10:43 PM (http://i1046.photobucket.com/albums/b463/vksingh18881/StockUpdate-2.jpg)
Title: Re: Tower Pro Motors and Wheels Post by: arjun2592 on October 15, 2010, 07:03:26 PM is tower pro motor still available?
if it is than pls e mail me at( banboy10@yahoo.in) |