RC India
Welcome Guest, please login or register.
 
Pages: [1]   Go Down
0 Members and 1 Guest are viewing this topic. Topic Tools Topic Tools 
Read
« on: July 15, 2021, 12:38:07 AM »
MicroFPV
Heli Lover
Active Member
**

Reputation Power: 1 
MicroFPV has no influence.
Offline Offline

City: BENGALURU
State: Karnataka
RC Skills: Intermediate
Posts: 16
Join Date: Jan, 2019




Hi all!
I'm selling my used analog Helifar X140 pro 3-inch quad with Frsky XM plus receiver for 9000/-. One of the standoffs is damaged and needs a new top screw as well. All the components are working, FC, ESC, motors, VTX, and receiver. If interested, please WhatsApp me at 9900241226.


Specifications:
Frame:
Wheelbase: 145mm
Arm plate thickness: 4mm
op and bottom plate thickness: 2mm
Side plate thickness: 1.5mm
Material: 3K carbon fiber
Weight: 49g

F4 Flight Controller:
Micro F4 flight control board ( Dshot version )
MPU: MPU6000 - SPI
CPU: STM32F405RGT6, dual 8K
Input voltage: 2 - 4S Lipo
Built-in Betaflight OSD to adjust PID
BEC output: 5V 3A
Size: 25 x 25mm board, 2mm mounting holes ( M2 )
Weight: 2.3g
Support SUBS / PPM / DSMX receiver

helifar 4-in-1 ESC:
Input voltage: 2 - 4S Lipo battery
Constant current: 25A x 4
Peak current: 30A x 4
BEC output: no
Firmware: BLHeli - 32
Size: 27 x 27mm ( main board ) 27 x 31mm ( including pad )
Installing hole: 20 x 20mm, M2
Weight: 4g
CPU: 32 - bit ARM cortex MCU 48MHz
MOS tube: top quality MOSFET
Support Damped Mode, Oneshot125, Oneshot42, Multishot, DShot150 / 300 / 600 / 1200, forward and reverse

FPV Transmitter:
Output power: 25mW / 100mW / 200mW switchable
Support Betaflight OSD to adjust power and frequency. PIT MODE is 0mW for close-up binding
Frequency: short press once time to change channel CH ( CH1 - CH8 )
Power: Long press 10s to inter power switchable mode. The LED light as follow. And short press to change the 25 / 100 / 200mW
Battery voltage: 7 - 26V
BEC: 5V 1A
Video system: NTSC / PAL
Antenna: RP - SMA
Frequency: 5.8GHz, 5 bands, 48channels with RaceBand: 5362 - 5865MHz
Size: 24 x 24mm ( L x W )
Hole: 20 x 20mm
Weight: 2.4g

5.8G 600TVL CCD Camera:
Image sensor: 1 / 3 inch SONY super HAD II CCD
Horizontal resolution: 600TVL
Lens: 2.3mm
FOV: 145 degree ( 2.3mm )
Signal system: PAL / NTSC
S / N ratio: more than 60dB ( AGC OFF )
Auto gain control ( AGC ) : yes
Backlight compensation ( BLC ): yes
Illumination: Min. 0.01lux / 1.2F
WDR: D - WDR
DNR: 2DNR
Day / night: color / auto / B and W
Power: DC 5 to 36V

5.8G Antenna:
Omnidirectional antenna
Frequency: 5600 - 6000MHz
VSWR: less than 1.2 at 5800GHz
Gain: 2.8dBi
Impedance: 50 ohm
Polarization mode: vertical
Interface: SMA, RP - SMA
Weight: 4g


IMG_20210712_134456.jpg
Used Helifar X140 3 inch analogue quad for sale
* IMG_20210712_134456.jpg (59.82 KB, 800x531 - viewed 193 times.)
Logged
 

Read
« Reply #1 on: July 27, 2021, 08:06:05 PM »
MicroFPV
Heli Lover
Active Member
**

Reputation Power: 1 
MicroFPV has no influence.
Offline Offline

City: BENGALURU
State: Karnataka
RC Skills: Intermediate
Posts: 16
Join Date: Jan, 2019



Hi all!
I'm selling my used analog Helifar X140 pro 3-inch quad with Frsky XM plus receiver for 9000/-. One of the standoffs is damaged and needs a new top screw as well. All the components are working, FC, ESC, motors, VTX, and receiver. If interested, please WhatsApp me at 9900241226.


Specifications:
Frame:
Wheelbase: 145mm
Arm plate thickness: 4mm
op and bottom plate thickness: 2mm
Side plate thickness: 1.5mm
Material: 3K carbon fiber
Weight: 49g

F4 Flight Controller:
Micro F4 flight control board ( Dshot version )
MPU: MPU6000 - SPI
CPU: STM32F405RGT6, dual 8K
Input voltage: 2 - 4S Lipo
Built-in Betaflight OSD to adjust PID
BEC output: 5V 3A
Size: 25 x 25mm board, 2mm mounting holes ( M2 )
Weight: 2.3g
Support SUBS / PPM / DSMX receiver

helifar 4-in-1 ESC:
Input voltage: 2 - 4S Lipo battery
Constant current: 25A x 4
Peak current: 30A x 4
BEC output: no
Firmware: BLHeli - 32
Size: 27 x 27mm ( main board ) 27 x 31mm ( including pad )
Installing hole: 20 x 20mm, M2
Weight: 4g
CPU: 32 - bit ARM cortex MCU 48MHz
MOS tube: top quality MOSFET
Support Damped Mode, Oneshot125, Oneshot42, Multishot, DShot150 / 300 / 600 / 1200, forward and reverse

FPV Transmitter:
Output power: 25mW / 100mW / 200mW switchable
Support Betaflight OSD to adjust power and frequency. PIT MODE is 0mW for close-up binding
Frequency: short press once time to change channel CH ( CH1 - CH8 )
Power: Long press 10s to inter power switchable mode. The LED light as follow. And short press to change the 25 / 100 / 200mW
Battery voltage: 7 - 26V
BEC: 5V 1A
Video system: NTSC / PAL
Antenna: RP - SMA
Frequency: 5.8GHz, 5 bands, 48channels with RaceBand: 5362 - 5865MHz
Size: 24 x 24mm ( L x W )
Hole: 20 x 20mm
Weight: 2.4g

5.8G 600TVL CCD Camera:
Image sensor: 1 / 3 inch SONY super HAD II CCD
Horizontal resolution: 600TVL
Lens: 2.3mm
FOV: 145 degree ( 2.3mm )
Signal system: PAL / NTSC
S / N ratio: more than 60dB ( AGC OFF )
Auto gain control ( AGC ) : yes
Backlight compensation ( BLC ): yes
Illumination: Min. 0.01lux / 1.2F
WDR: D - WDR
DNR: 2DNR
Day / night: color / auto / B and W
Power: DC 5 to 36V

5.8G Antenna:
Omnidirectional antenna
Frequency: 5600 - 6000MHz
VSWR: less than 1.2 at 5800GHz
Gain: 2.8dBi
Impedance: 50 ohm
Polarization mode: vertical
Interface: SMA, RP - SMA
Weight: 4g


Fixed all the issues, new standoff, new top screws, quad is working properly. New price 7500/-. Please whats app 9900241226, if interested.
Logged
 

Read
« Reply #2 on: July 29, 2021, 10:02:47 PM »
MicroFPV
Heli Lover
Active Member
**

Reputation Power: 1 
MicroFPV has no influence.
Offline Offline

City: BENGALURU
State: Karnataka
RC Skills: Intermediate
Posts: 16
Join Date: Jan, 2019



Hi all!
I'm selling my used analog Helifar X140 pro 3-inch quad with Frsky XM plus receiver for 9000/-. One of the standoffs is damaged and needs a new top screw as well. All the components are working, FC, ESC, motors, VTX, and receiver. If interested, please WhatsApp me at 9900241226.


Specifications:
Frame:
Wheelbase: 145mm
Arm plate thickness: 4mm
op and bottom plate thickness: 2mm
Side plate thickness: 1.5mm
Material: 3K carbon fiber
Weight: 49g

F4 Flight Controller:
Micro F4 flight control board ( Dshot version )
MPU: MPU6000 - SPI
CPU: STM32F405RGT6, dual 8K
Input voltage: 2 - 4S Lipo
Built-in Betaflight OSD to adjust PID
BEC output: 5V 3A
Size: 25 x 25mm board, 2mm mounting holes ( M2 )
Weight: 2.3g
Support SUBS / PPM / DSMX receiver

helifar 4-in-1 ESC:
Input voltage: 2 - 4S Lipo battery
Constant current: 25A x 4
Peak current: 30A x 4
BEC output: no
Firmware: BLHeli - 32
Size: 27 x 27mm ( main board ) 27 x 31mm ( including pad )
Installing hole: 20 x 20mm, M2
Weight: 4g
CPU: 32 - bit ARM cortex MCU 48MHz
MOS tube: top quality MOSFET
Support Damped Mode, Oneshot125, Oneshot42, Multishot, DShot150 / 300 / 600 / 1200, forward and reverse

FPV Transmitter:
Output power: 25mW / 100mW / 200mW switchable
Support Betaflight OSD to adjust power and frequency. PIT MODE is 0mW for close-up binding
Frequency: short press once time to change channel CH ( CH1 - CH8 )
Power: Long press 10s to inter power switchable mode. The LED light as follow. And short press to change the 25 / 100 / 200mW
Battery voltage: 7 - 26V
BEC: 5V 1A
Video system: NTSC / PAL
Antenna: RP - SMA
Frequency: 5.8GHz, 5 bands, 48channels with RaceBand: 5362 - 5865MHz
Size: 24 x 24mm ( L x W )
Hole: 20 x 20mm
Weight: 2.4g

5.8G 600TVL CCD Camera:
Image sensor: 1 / 3 inch SONY super HAD II CCD
Horizontal resolution: 600TVL
Lens: 2.3mm
FOV: 145 degree ( 2.3mm )
Signal system: PAL / NTSC
S / N ratio: more than 60dB ( AGC OFF )
Auto gain control ( AGC ) : yes
Backlight compensation ( BLC ): yes
Illumination: Min. 0.01lux / 1.2F
WDR: D - WDR
DNR: 2DNR
Day / night: color / auto / B and W
Power: DC 5 to 36V

5.8G Antenna:
Omnidirectional antenna
Frequency: 5600 - 6000MHz
VSWR: less than 1.2 at 5800GHz
Gain: 2.8dBi
Impedance: 50 ohm
Polarization mode: vertical
Interface: SMA, RP - SMA
Weight: 4g


Fixed all the issues, new standoff, new top screws, quad is working properly. New price 7500/-. Please whats app 9900241226, if interested.
Sold..
Logged
 

Pages: [1]   Go Up
Jump to:  

Related Topics
Subject Started by Replies Views Last post
450 quad frame, 10 inch props and new APM for sale
For Sale
kn8alpha 4 1555 Last post January 29, 2019, 05:26:00 PM
by prabhu2420
2 inch 1.5mm hole propellor for micro quad.
Wanted
sim_tcr 0 557 Last post January 31, 2019, 03:05:18 PM
by sim_tcr
14 inch propeller quad with naza V2
For Sale
Parthmandal 1 646 Last post December 29, 2020, 09:28:03 PM
by Parthmandal
Cidora sl5, 5 inch 4s quad for sale
For Sale
MicroFPV 0 413 Last post September 01, 2021, 08:15:15 PM
by MicroFPV
Cidora sl5 v2, 5 inch, 4s quad and Titan DC 5, 5 inch, 6s quads for sale
For Sale
MicroFPV 4 878 Last post August 13, 2022, 07:59:34 AM
by MicroFPV