|
Title: Used Multiplex EasyStar II with carbon reinforcements and all electronics Post by: ajayjohn on August 26, 2014, 01:17:01 AM I have a used Multiplex EasyStar II for sale with all the electronics, box ,manual etc.
The plane is completely assembled and is ready to fly. The plane has been carbon reinforced for strength in key areas for additional strength. The entire package including the electronics is given below 1) Easy Star II airframe shown in pics above with decals, carbon fitments and all items in the original package 2) FSD motor 1290kv 3) Gotech 5gm micro servos for rudder and elevator (2 nos.) 4) Turnigy T9gE micro servo ailerons (2 nos.) 5) Turnigy 2200mAh 3S 11.1 20c LiPo (slightly bloated, good as a spare ideally) 6) TURNIGY Plush 30amp ESC 7) All the additional stuff like horns, cables etc. Asking price for entire kit is ₹7000 + shipping based on mode of your choice. Pictures below... (http://oi60.tinypic.com/6rqcfs.jpg) (http://oi60.tinypic.com/nxjfyd.jpg) (http://oi61.tinypic.com/oknz1l.jpg) Apologies for the poorly framed photos with all the mess in the background. This is a good plane and was my first large RC flyer. Purchased it last year from this very forum but unfortunately had to travel away from home less than a month later and have been out of touch with RC since then. Hoping for a good buyer keen on getting into RC as this is a great plane to learn on. Title: Re: Post by: ajayjohn on August 29, 2014, 08:29:40 PM Bump
Title: Re: Used Multiplex EasyStar II with carbon reinforcements and all electronics Post by: Rcjabalpur on August 30, 2014, 08:57:21 AM Would you like to sell the esc alone
Title: Re: Used Multiplex EasyStar II with carbon reinforcements and all electronics Post by: ajayjohn on September 04, 2014, 06:21:55 PM Apologies for the delay in updating this thread. I was travelling all of the last week.
Since there were multiple PM's and mosts asking for individual part offers, I am modifying the listing for part wise sales. Request the admin to please let me modify the thread title to reflect this change. Please find the cost of individual items for sale below. 1) Easy Star II airframe shown in pics above with decals, carbon fitments and all items in the original package +connectors, horns, etc. ₹3700 + Shipping 2) FSD motor 1290kv ₹1000 + Shipping 3) Gotech 5gm micro servos for rudder and elevator (2 nos.) ₹260 each, total = ₹500 + shipping 4) Turnigy T9gE micro servo ailerons (2 nos.) ₹410 each, total = ₹800 + shipping 5) Turnigy 2200mAh 3S 11.1 20c LiPo with connector (slightly bloated, good as a spare ideally) ₹400 + shipping 6) TURNIGY Plush 30amp ESC with connectors (Brand new, not even used once. Only connector added) ₹1000 + shipping As before, the cost of the entire kit for a ready to fly plane would be discounted at ₹7000 + shipping. Title: Re: Used Multiplex EasyStar II with carbon reinforcements and all electronics Post by: Rcjabalpur on September 04, 2014, 06:50:29 PM Book the esc for me and give me the bank details was a long pending (but can i see a few pics ? )
Title: Re: Used Multiplex EasyStar II with carbon reinforcements and all electronics Post by: fxshoppe on September 04, 2014, 06:54:47 PM kindly block Gotech 5gm micro servos for rudder and elevator (2 nos.) for me and pm me the bank details along with shipping cost to delhi. Also you have not mentioned how much it has been used.
Title: Re: Used Multiplex EasyStar II with carbon reinforcements and all electronics Post by: ajayjohn on September 08, 2014, 01:43:31 PM Book the esc for me and give me the bank details was a long pending (but can i see a few pics ? ) ESC confirmed for rajjaiswal92. Pics of ESC provided below. The connectors come free :P (http://oi62.tinypic.com/dzfmlg.jpg) Apologies for my delayed responses yet again (having a tough phase at work). I can commit to shipping the items within 1-2 working days via First Flight or DTDC via any delivery mode of choice, post confirmation of payment. Will also provide a proof of shipping. Please PM me after expression of interest and i will share my email ID, mobile number and bank details. Title: Re: Used Multiplex EasyStar II with carbon reinforcements and all electronics Post by: Rcjabalpur on September 08, 2014, 01:54:20 PM Did you solder it ?
Title: Re: Used Multiplex EasyStar II with carbon reinforcements and all electronics Post by: ajayjohn on September 08, 2014, 02:06:08 PM kindly block Gotech 5gm micro servos for rudder and elevator (2 nos.) for me and pm me the bank details along with shipping cost to delhi. Also you have not mentioned how much it has been used. I am terribly sorry. The servos seem to be hard to extract from the airframe as they they were glued in initially and i do not want to damage the airframe. (Image below) (http://oi61.tinypic.com/14v4vmp.jpg) My bad. I am taking down the sale offer for all four servos. They will now be available only as part of the airframe. P.S: If you have any suggestions on how i can extract them with no airframe damage then please share. Instead, the revised particulars are given in the next post. Please let me know if you are still interested in anything. Title: Re: Used Multiplex EasyStar II with carbon reinforcements and all electronics Post by: ajayjohn on September 08, 2014, 02:07:01 PM Please find the updated cost of individual items for sale below.
1) Easy Star II airframe shown in pics above with decals, carbon fitments and all items in the original package +connectors, horns, etc. except the prop & spinner. + Turnigy T9gE micro servo ailerons (2 nos.) + Gotech 5gm micro servos for rudder and elevator (2 nos.) ₹4700 + Shipping Images as shown in OP 2) FSD motor 1290kv ₹1000 + Shipping (http://oi61.tinypic.com/992hhl.jpg) 3) Foldable prop and spinner ₹300 + Shipping (http://oi60.tinypic.com/25jh6ko.jpg) 5) Turnigy 2200mAh 3S 11.1 20c LiPo with connector (slightly bloated and not fit as a primary battery, good as a spare ideally) ₹300 + shipping (http://oi59.tinypic.com/21j7m79.jpg) Lower white thing is padding + velcro (http://oi58.tinypic.com/33maa7m.jpg) 6) TURNIGY Plush 30amp ESC with connectors (Brand new, not even used once. Only connectors added) ₹1000 + shipping (http://oi62.tinypic.com/dzfmlg.jpg) Title: Re: Used Multiplex EasyStar II with carbon reinforcements and all electronics Post by: ajayjohn on September 08, 2014, 02:10:31 PM Did you solder it ? Yes, they been soldered to the connectors and insulated with tape. Title: Re: Used Multiplex EasyStar II with carbon reinforcements and all electronics Post by: ajayjohn on September 10, 2014, 03:52:58 PM Update: ESC still available for sale as rajjaiswal92 might back out (Only if he does).
As the result, all the below items are still available (with slightly reduced prices) 1) Easy Star II airframe shown in pics above with decals, carbon fitments and all items in the original package +connectors, horns, etc. except the prop & spinner. + Turnigy T9gE micro servo ailerons (2 nos.) + Gotech 5gm micro servos for rudder and elevator (2 nos.) ₹4600 + Shipping 2) FSD motor 1290kv ₹950 + Shipping 3) Foldable prop and spinner ₹300 + Shipping 4) Turnigy 2200mAh 3S 11.1 20c LiPo with connector (slightly bloated and not fit as a primary battery, good as a spare ideally) ₹300 + shipping 5) TURNIGY Plush 30amp ESC with connectors (Brand new, not even used once. Only connectors added) ₹1000 + shipping Title: Re: Used Multiplex EasyStar II with carbon reinforcements and all electronics Post by: ajayjohn on October 01, 2014, 02:01:15 AM Some items have been sold.
Prices reduced for the remaining items have been reduced as given below. As the result, all the below items are still available (with slightly reduced prices) 1) Easy Star II airframe shown in pics above with decals, carbon fitments and all items in the original package +connectors, horns, etc. + Turnigy T9gE micro servo ailerons (2 nos.) + Gotech 5gm micro servos for rudder and elevator (2 nos.) + Foldable prop and spinner + FSD motor 1290kv All the above together: ₹4600 + Shipping Title: Re: Used Multiplex EasyStar II with carbon reinforcements and all electronics Post by: ajayjohn on October 07, 2014, 06:05:32 PM Bump!
Title: Re: Used Multiplex EasyStar II with carbon reinforcements and all electronics Post by: ajayjohn on October 30, 2014, 03:00:22 PM All listed items on post 12 sold. Mods, please close this thread. :hatsoff:
Title: Re: Used Multiplex EasyStar II with carbon reinforcements and all electronics Post by: ajayjohn on February 05, 2015, 11:14:20 AM Locking this thread
|