RC India

*********TIME FOR MINI PROJECTS*******
For Those Students intrested in building Quadrotor in mini project Within short time, irrespective of ordering parts from other countries and waiting. ***Grab these Sparkfun products Deals from India and jus get your own motors and esc's and ****FLY*****

6 Channel Transmitter + 8 Channel Reciever --- Rs. 2000/-

Arduino Pro Mini                         (x1)
IMU 6DOF (ITG3200+ADXL 345)    (x1)
FTDI 5V + USB Mini B Cable         (x1)
Quadcop Green Shield                 (x1)
Logic Level Converter                 (x1)
Y-Harness Power Grid                 (x1)

DVD Quadrotor Codes+Configurator+Flight Software (Arduino Based Method)

http://www.youtube.com/watch?v=h7QPXEtoijc (http://www.youtube.com/watch?v=h7QPXEtoijc)

For Details Plz Contact/ visit:

Mr. Ronie +91 8977518086
Uppal IDL,
Hyderabad,

                       

Very good Information on the page Mr.Ronie  :thumbsup:


Arduino Pro Mini                         (x1)
IMU 6DOF (ITG3200+ADXL 345)    (x1)
FTDI 5V + USB Mini B Cable         (x1)
Quadcop Green Shield                 (x1)
Logic Level Converter                 (x1)
Y-Harness Power Grid                 (x1)
 
This all ur giving in ? price

Yet another Blasphemous Dogma ? Please put :

1. Price
2. Picture
3. Price Comparison for such claims.
4. Reference from other members, if possible.

This account was previously deleted from this forum for spamming (sprinkling sales information about the same product all over the forum).

Looks like some people just don't get simple instructions, like the ones listed here about "For Sale" entries :

http://www.rcindia.org/for-sale/guidelines-for-classifieds/

Those instructions are not only for the benefit of the buyer, they also protect the interests of the seller.

Looks like the price of items may be in the video attached, but realistically, who has time to catch all of that in a video ?  So unless this thread is updated with pics/prices, I am sorry to say that the thread will be deleted in 24 hours.  It is better to delete the thread, than to deal with a buyer seller conflict later on.

Not playing the Devil's advocate here, however, all prices and details are available on the video. I hope I'm not mistaken:

6 Ch Tx/ 8 Ch Rx - 2000
LiPo Cgharger - 1000
Arduino Pro Mini - 990
IMU6DOF - 4200
Logic level Converter - 140
FTDI 6V - 900
EC3 Connector set - 350
(800Kv BLM +25A ESC)X4 - 5250
10X6 Props X 4 - 400
3mm Prop Adapters X 4 - 160
Balsa Frame - 300

Total Rs. 15690/-

@VC ..yeah!!.. the cheapest quad i made is for 98$ ..incl shipping.!!

If it's 2.4GHz, then it's one heck of a deal! :o

Sujith - any details available?

Hyd_Quads - Yes it seems to be - going by the video.

@ VC sending PM with details.

ohhh well.....

I am not Quadcop Owner. may be its account deleted because of several postings of same post in the forums. allegedly

well Quadcop is going very well in Hyderabad Engineering Colleges...

Prices are listed here...
2.4 GHz FLY SKY (6 Channel Transmitter + 8 Channel Reciever) --- Rs. 2000/-
Arduino Pro Mini                                                   (x1)        --- Rs. 990
IMU 6DOF (ITG3200+ADXL 345)                              (x1)        --- Rs. 4200
FTDI 5V + USB Mini B Cable                                   (x1)         --- Rs. 900
Quadcop Green Shield                                           (x1)        --- Rs. 1000
Logic Level Converter                                            (x1)        --- Rs. 140
Y-Harness Power Grid                                            (x1)        --- Rs. 350
Balsa Simple Frame                                               (x1)        ---  Rs. 300

TOTAL                                                                (x10)      --- Rs. 9880 (including Shipping)

Offer Price For Engineering Students (Mini Project)                   --- Rs. 9200 (including Shipping)
(Provided they must send college id. card xerox)
This is just to ensure us that the student is following
our method in building his Quad. 

Mr. Ronie +91 8977518086

(PICTURES ARE IN VIDEO)

motors and escs not included in the price?? !! please share total pricing of the quad with all electronics .

Sorry to Say that...Mr. Sujith

 890 KV Motors and ESC's are not in stock and if the user wanted to have 890KV motors they can go by this one.

http://thehobbyshop.in/index.php?main_page=product_info&cPath=1&products_id=20
Well This is the only store in INDIA which sells 890KV motors.
If any doubts you can ask Sharda University Students how the method follows.
But call The store owner that you need type two motors (which have mounting @ bottom). you can take Quadcop name with him.

I can That a student can complete his project with in Max. Budget of Rs.16000/- within the parts available in India itself irrespective of depending on other countries and waiting till the end of project time.

http://www.youtube.com/watch?v=V2LB8nA_z_4

Interested guys can call me up for details ...

+91 8977518086

Different configuration's Like

Quad X
Quad +
Quad Y4
Tricopter

All these can be done with this method.
An Example of Flight software uploading and configurating the values in configurator for a Tricopter is shown in above video.

You do realize that the admins can see the email address you register under, and how the left side of those email addresses are the same ?

We Work For Quadcop and we are not the Owners its an Institute tied up with Quadcop Doing Projects for Engineering Students visiting Colleges...

We believe that likely story :)

Free brotherly advice... please build up your credentials slowly and tone down the marketing... it is for your own good.

So do you know that all the final year students who made quad this year in projects weren't gt succeeded by following the posts in this forums. They waited till the parts arrive from other countries wait nd wait...they get , they lose any one part, again order and wait this is all what lead to failure... we are here to help out the students to build their Quad in Cheaper and faster and powerful way(Arduino) method's.


We are here to help complete their Project within India itself rather depending on other Countries.
Motors & ESC's & LIPO's from Hobbyshop.in (Kerala) and sensors from us also a free 24/7 support makes their projects success..

I have nothing against what you are trying to do... only against HOW you are doing it.  Starting with... are you absolutely SURE that your's is the WORLD'S (yes the WORLD!) CHEAPEST quad components ?

In short, tall claims affect your credibility from the start. You would have made 10 times the friends if you just said "Affordable and locally available quad parts".  Comprende gentlemen ?

PS: http://www.urbandictionary.com/define.php?term=comprende

Irrespective to the posts here .... guyzzz interested in building up their quads can thoroughly go by these web pages.

Now everyone can get a good feel for how the customer support will be ;) 

"Irrespective of how we behave... we are very willing to help" !

Anyone starting new, and has the time, may also consider this post :

http://www.rcindia.org/self-designed-diy-and-college-projects/quad-using-arduino-and-wii-mp-and-nunchuck/msg50965/#msg50965

Not exactly world's cheapest, but not too expensive either.

Not exactly world's cheapest, but not too expensive either.


YUP....., good quote.

Friends don't depend on other countries for parts, U guyzzz can make a Quad within the parts available in India.
Follow the website carefully you find the results. follow in FB also...

Nice and hard zero tolerance. Kudos Anwar bhaii.

People should know that this place is not college-Kid-entrepreneur Play ground and such fairy tales have zero appeal to senior junta. Please stop this mutual admiration and shadow games to make people belief in this product. There are 10's of Quad builders in the country now (Thanks to 3-Idiots ?) and not everyone puts such a tall claim. This forum has members who are concerned about new members/rookies falling prey to false promises and fraudulent trades. So  hyd_quads / storehyd , create a credible profile, gets some review from old trusted members here, and then think of 'Helping' others.

Now in what way am I related to all this!

hyd_quads (myself) is DIFFERENT from storehyd. I was previously "vineet_p" but I got my username changed by anwar sir when there was a minor conflict with "vineet" of Delhi. I own NO LHS, I never met storehyd. Kindly note that.


Sorry but I never claimed I am more eligible than the seniors present here to 'help' others. I do give minor suggestions, but I always consider myself to be a help-seeker than an expert consultant in RC.

Excuse me if I misunderstood something or anything else.

Read the entire thread from top. You claim you dont have any association with 'storehyd' or the person offering the Quads. But with the authority you have post in 'Direct speech' instead of 'Reported Speech', would always raise concerns about the ownership issues.

Now it really seems to me that humans have become more logical than ever. "hyd" in common, "quads" in common and to make it worse, I said that the Tx was a good deal. "Find keywords and match" It's become like google search! So you say I'm associated with storehyd in some way or the other, created multiple accounts, promoted non-sense products, cheated beginners, etc etc... Concluding all this without any basis is so disgusting!
You can go through my previous posts and find none of them have a commercial intetntion. I never talked of 'retailing' products, never talked of engineering colleges, their projects, etc. So far, I've only put very few personal items on sale.
I appreciate the fact that it's the responsibility of the seniors of the forum to protect the juniors from falling in the traps of frauds, infact, I was a victim of such a case, too.
That really hurts the morale when you allege that other's hobby is a cheat business.
All I want to say is, "have a basis when you conclude something, especially when you conclude something negative"

What the hell is goin on here with hyd_quads, ujjwaana & the Admin...

haaaaaaaaaaa

Dnt you guyzzz have a minimum commonsense that you are diverting the topics.

What's the price of 6Ch TX in stores (FlySKY) haaa...its 2500 in one store and 3000 in other store...
But @ Quadcop its 2000(6Ch TX + 8Ch Rx)..

Just today we Dispatched 4 Transmitters to places like Rajasthan & Karnataka..and sent their tracking id's. those guyzzz were from this forums itself.
Dnt you guys want them to be helped with best deals like this.

Mr. Ujjwana dnt think that you are a very big shot in RC Stuffs and comment like this .k. on hyd_quad's.

This is the worst part of the forums i never saw.

                                       TRANSMITTERS ***SOLD OUT***

SENSORS                                                PRICE

ARDUINO PRO MINI 5V 16MHz                        990

IMU 6DOF                                                   3990
(ITG 3200 + ADXL345)

FTDI                                                            900
(Free USB Mini-B Cable)

QUADCOP GREEN SHIELD                             1100

LOGIC LEVEL CONVERTER                              140

POWER GRID                                                350
(Y- HARNESS)

                                      TOTAL               Rs.  7470

(Includes Free Shipping & Handling)

For details Contact;
Mr. Ronie,
+918977518086

A "find keywords and match" game is going on against me...

You are treading a fine line my friend.

First you came and spammed this forum.  Then you came in again, and simply lied about your account, and when I pointed out the email address is same/similar, you changed it.

Now you claim as if you did the Indian RC community a great favor by selling 4 radios at a price lower than others.  We have seen many "shops" spring up and disappear within months, on this forum itself.  When they come, they make tall claims about price, and will have 3.5 pieces in stock which were ordered as personal items this escaping customs duties etc, and hold that against respectable long term hobby shops who do it the right way. 

Shops like RCBazaar and RCforAll (probably others, but I know these for sure) have sold 100s of these radios.  RCBazaar goes out of its way, and flashed the 9ch radios with bug-fixed firmware, and does it for free even for radios not bought from them (http://www.rcindia.org/radios-and-receivers/rcbazaar-is-now-flashing-flysky-th9x-radios-with-new-software-for-re-1/). Start doing something like that, and then talk about "service to Indian RC community". 

I am pretty sure you will disappear from this "selfless service" as soon as you run out of stock, or you get another job after graduation.  So please don't test the intelligence of this forum's audience by parading the 3.5 items you have in stock. 

And your total premise is questionable ! Unless you also sold the motors. ESCs and props, people MAY still have to order them from  outside the country, which negates your selling point of not having to order from outside.  Even not getting a pair of counter rotating props causes one to buy from outside, which means the waiting game has still to be played !

Overall, while I agree that you did not overcharge for the 4 (or 5) radios you had in stock, don't use that as an excuse to blame others. Try doing the same for 100s of radios, and then trumpet your advantage.  You are already "out of stock" on your prized item ! 

And I already posted another thread from Ashta bhai, which points to a quad that can be built using local materials, and seems to be cheaper than your world's cheapest !

@anwar sir: Glad the previous post doesn't say anything about me, hyd_quads.. Anyway, what do you think about me sir, just what ujjwaana does?

well a quad can be build in several ways the one u talked abt is cheapest if u use HK boards .k....and never compare ppl who deal with arduino's and ITG'S/ADXL .K...

DID I POINTED OUT ANY STORES NAME ?
(Check my posts)

SO YOU WANT ME TO SELL 100 TRANSMITTERS.

Listen if atleast one transmitter is sold out it may helps the guy.

I got a customer from Bikaner in this forums itself when i posted about TX.
He asked me to send 1BLDC + 1ESC + 1T/R + 2 Props(Slow Fly).
He wanted to make medium level plane.

Do you know what i send to him.
I was having old stock.
so I wanted to finish them offf.
I sent him--- 2BLDC(Emax CF2822) + 1 ESC-Emax(30A) + 1 T/R + 1JR-Prop Adapter + 3Props(Electric) + 2 Slow Fly Props + 2 EC3 connectors(M+F)

A net price was Rs. 3563------which was a worth of 4800.

Dont give a page response for a 4 line posts.

First of all, you did not respond to lying about your account and being someone else :)


There is only once when I pointed out an alternative, in reply #19 in this thread.  If you cared to click on the link there, you will see that it is a pure arduino build, which has nothing to with HK/KK prebuilt boards.  

I'll make it easy for you : http://www.rcindia.org/multirotors/quad-using-arduino-and-wii-mp-and-nunchuck/msg50965/#msg50965

See the prices there ? So much for "world's cheapest" ;)


I NEVER said you mentioned any store name.  The store names I mentioned are about people who can really make a claim towards supporting this hobby (and the sales of transmitters at reasonable price in India).  Re-read this thread.

If you continue to sell for reasonable prices, the members here will respect that.  But don't think even for a moment that having 3.5 pieces in stock gives you the right to feel "above" stores who are in it for the longer term.  Let us see how long you last at selling like this.

And if you care/read enough, you will see that I appreciated the fact that you did not put a huge margin on the few radios you had in stock. But to blame others for being Rs500 higher than you, you need to sell 100s of radios at your price, YES !


Are you 11 ? :)  Your response post is almost as long as mine. Except for that you did not respond to questions I raised, and posted a bunch of stuff without reading even this thread.

As the admin, I am not sure I should prolong this.  People have enough information to see and make informed decisions about your operation.  

7474 only on the control board oh ***   :giggle:
thn motors + esc's + battery + tx rx. =rs. 15-17k
bad idea
uav development board costs arount 7509 that's better then this.

Hi Anwer,

you r right it's not the cheapest it is expensive.
if you make a quad with HK board
cost of the board rs. 1500 max. incl custom and shipping ( cost of green shield board rs.7500 ). :giggle:
then motors esc's battery tx rx etc etc.
IT IS EXPENSIVE. 

ASTHA sir's ,

multi wii was amazing that had a baro also...... and it was still less then this simple controller.

If anyone wants to make a *cheap* quad in India, the best idea is to follow Ashta sir's build log. I believe that's the cheapest (yet good) quad made in India, ofcourse with the penalty of self-programming, self-flashing the firmware and a little more efforts.