I have Limited Stock of the Genuine(Not Chinese or any other copy)X-ACTO foam cutter, this is a very useful cutter and can cut V-Groove and channel cuts with ease, it can also be used with good versatility to cut freehand. Foams it can be used with are:
EPO,EPP,EPS,FoamBoard,BioFoam,Depron,High Density(HD)/Normal StyroFoam,High Density(HD)/Normal Thermocol,BlueCor(Fan Fold Foam), Elapor,SunBoard, Sheet Metal, Vinyl sheets, PVC sheets.

Maximum Cutting Depth is 7/16" which is  approx. 12mm or 1.2cm.
Replacement blades are the #8R Blades:
http://www.xacto.com/products/cutting-solutions/blades/classic-blades/Lightweight-Utility-Knife-Blade-8R.aspx

You can buy this special cutter for 23$ from stores like amazon and Ebay, but i talked to a distributor and procured this item for much less.
Seeing that this is a very useful tool for Plane modelers And DIYers i procured this item for you guys for a lower cost so you can get a professional grade cutter for a cheaper cost.
This item includes 2 blades that are built in and 2 extra blades.



Rs.750 for 1 piece that is approximately 12$ and half the rate. If you are interested to buy it pm me and i will give you more details and payment details.

Here is a video showing its versatility and cutting precision:


Thank You,
Neil

Did u import this

Sorry guys forgot to mention the price includes shipping charges to anywhere in India.
You wont find such a cheap price which includes shipping anywhere else.

Yes ahamed this is imported.

2 sold and 1 Booked for ahamed

Also the cutter has an easy lock storage handle which makes your hand conform around it to give very good grip and its like there is a blade attached to your hand with which you are cutting. Due to this you get increased versatility. You can use the right hand side blade or left hand side blade for comfort, as right handed and left handed people have different preferences.

A secure lock screw keeps the blades secure in the exact position you adjusted them to always even after a lot of cuts, this allows for the cutting depth to be very precise.

Hello,
Please book one for me and send me your bank details on 8140901570.
Kaivalya Pathak

HI Neil,

Pls send me payment details for X Acto   at 9341211628

Thnks

Nakul

Hello RCNeil21,

I like this product, there is huge price difference in each store, please check the URL http://www.xacto.com/Where-to-buy.aspx?SKU=X7747 (Refer pic #1 )

Walmart is cheapest one

(Refer pic #2)
http://www.walmart.com/ip/X-ACTO-Foam-and-Mat-Board-Cutter/16817669?sourceid=1500000000000003183800&veh=cse&srccode=cii_151082803&cpncode=26-25771954

Not sure whether these URL are accessible in India, so I am attaching pics. Just wanted to confirm that I am buying right product.
Wallmart is also showing two prices one with $22 and other $ 2.83  , I guess it's with and without accessories . Let me  know which one to choose.

Thanks in advance .

1 booked for nakul and 1 for Kaivalya i will send payment details soon. before 3:00pm.

5 pieces gone few left get yours now guys or i dont know if i can give it at this price in the future.

Vinayak its good that you stay in USA, Dont go for the 22$ one even though it is genuine so is the one in walmart At 3.88$ you can opt for a in store pick up. Good luck with your buy

Sorry for delay in sending details guys i will revert back by tommorrow evening, All orders will be shipped out on monday, thank you very much.

hey can book one for me  neil i will be able to transfer money by monday

One booked for Yash, tell me your no. so i can send account details.

Orders will be shipped out tomorrow guys, I think by sat you all will have received The cutter

Hi Neil   no news of XActo any shipping ref. number  so I could track it??  Thanks.....

Yeah plz message the details...

Guys sorry was down with a fever,
I wanted to post lot discounts:

2 pieces for Rs.1350
5 Pieces for Rs.3450
10 Pieces for Rs. 7000

Per piece is still Rs.750

nakul it should reach you by monday, yash,ashamed and kaivalya i will message you tracking details

I like the way how it's priced, especially the fact that it starts getting costlier when you buy in bulk!    

That is the way Akio Morita priced his first transistor radios.

Rc Neil - 'made in Japan'

Lol no sir its 'Made in USA'

And jaspreet bhaiya the cost of one piece is still 750 so for 2 pieces it 1500 i am offering it at 1350. The cost in bulk is reducing

1@750
2@675 each
5@690 each
10@700 each
 

Oh yes thats because i have taken it off total
And decreased the rate of 2 so much because buying 2 is most convinient for people, to gift one to someone or have one as spare.
And the discount is off the total, 2 - (2x12$), 5$- (5x12$) , 10$ - (10x12$)

I am giving as much discount as possible, i havent got any such discounts from the distributor as it is already a discounted rate.

Extremely grateful to Neil for letting me have one. 

From what I can tell, it seems to be 100% original and bears the code X 7747.

Great product for anyone working with depron or foamc ore board.

Thanks a ton!

Thank you Neil21  recieved XActo today  seems to have good finish and looks sturdy.  Just need to know if spare blades are available locally for the future. Anyways thanks again

No problem VC sir, this was just a supplicating gesture if you know what i mean.
Nakul i was going to provide 2 Spare blades with each piece but i couldnt get my hands on them.

Though It is like 2$ or something for 5 Spare blades, it is the #8R blades from XACTO.

Discount of Rs.1350 only for 2 pieces.

People who want to buy More than 5 Pieces please send me a private message.

Just recieved the parcel neil thanks a ton and its orignal product not chinese one :)

Is this cutter useful for coro plastic sheet ??

rcparkjets The product you have is original, the info given behind only mentions the lot manufacturer.
Even the ones i am selling have it.

I dont know what happened to the people who demanded it before stocks came.

I have sold 8 Pieces only a few remaining, wont get another shipment in if this goes on.

Still i have pieces left people interested please message me
There will be no rerun or restock of this item so whatever i have is all i will ever have left.
Best chance for you guys to get this useful tool at such a cheap rate.

Discount for 2 pieces - Rs.1350/-

iwincar this can easily cut coroplast sheets. It is not useful for low density foams though.

One for me. Please send account details on 09845149783

- Bopanna

One for Kodava, pravesh and 1 booked for iwincar (no response yet.)

Payment done.

Shipping out all orders today will give tracking details soon.
I have some cutters still get yours now guys.

Hi I need one send ur bank details or pm me

All parcels shipped yesterday will reach you guys by max thursday.

8 pieces remaining only get yours now guys, people not on site are buying too so i will be out of stock soon.

stocks running out only 6 pieces left.

Special offer for mumbaikars for ganesh chaturthi.

Rs.600 a piece
if buying above 4 pieces please PM me.

6 pieces left only, no one else wants this cutter? i thought many needed a professional grade cutter for cheap and this is something DIYers would love to have.

Hi Neil,

can i use blades available locally after i exhaust the blades that come along with this.

Sharath

any local source for spare blades?

Depends on which blades your talking about thay should have a trapezium shape and a hole in the center.

If you exhaust the blades the you can buy it from here:
http://www.hobbylinc.com/htm/xac/xacx208.htm

or if its not possible to procure then pm me i will get it for you.
Please tell me how many blades you will be needing.

Blade is: #8R/#X208 blades.

6 pieces left, special offer 600/- including shipping for people from mumbai only only till next saturday.

Kamraj i have shipped your cutter will send tracking details soon.

5 pieces left.
Rs.600 a piece for mumbai buyers only, discount only till this saturday on account of ganesh chaturthi.

Really awesome cutter, it cuts through foam like butter. And the 45 degree cutting is quite accurate, i got a 45.4degrre cut with it on EPP foam.
Thanks neil its a awesome 

How did you measure 45.4 degrees

Are you a real person?

@sanjayrai55
Who me?
(Example of people taking comments personally as if aimed at them)

SimpleRC is one post old. May have access to super measuring instruments. Or fibbing. Or just a typo.

I remember refusing a purchase from Lance as he didn't fulfill my KYC (know your customer) needs.
Never knew that he was a well established veteran on this forum with impeccable credentials.
(My apologies Lance)

How do we know who we are dealing with or talking to?

RcNeil21. As price for hijacking your thread, will take one Xacto as even VC took one.

Sure kk sir one for you, please send me your mobile number.

Sanjay sir simple is a personal friend of mine and he used to live here. His hobby is making model homes and foam house models, though he was in robotics some time ago and i think he still is. I just asked him to come to this forum and post his thoughts on the cutter. As far as precision goes i dont know what instrument he used to measure but i think he must have gotten a measurement between 45 and 46 and thats what he put as 45.4 lol.

OK   

Turns out he did use a precision tool. It was a starett digital protractor.
Sorry for that protractor joke before man.

Great

I am interested in one. send me a PM and bank details on 9560604442

Regards

Subir

One booked for kk iyer sir and one for subir sir,
i will ship orders tomorrow.

Only 4 left.

Packed will ship it soon

one for me too. pls PM the bank details.

Sent pm please check.

Hi Neil
Money deposited in your accout via RTGS confirm and let me know.

Regards
Subir

Hi Neil
Money deposited in your accout via RTGS confirm and let me know.

Regards
Subir

@rcneil21,
Funds transferred through NEFT.
See pm for my address.

Sure thank you sir.

All orders have been shipped will send tracking details soon.

Only 3 pieces left.

Just two pieces left

1200/- for both pieces including shipping.

750/- if buying individually.

2 pieces left only.

@RCNeil21
Why did you send me the Made in China item instead of the original Made in USA?

Sorry for jumping into the thread. I wanted to share what I understood by visiting some stationery shops in Kuwait who are selling X-ACTO products.
I could see made in USA product in one shop and made in China product in the other shop. The price is similar and around 18$. I observed that the products made in USA are of very old stock (atleast two years back). Hence, I think X-ACTO could have offloaded their manufacturing works to China. Attached images of old product which is made in USA. So, the product what you are having is original X-ACTO product. Hope, you are convinced.
By the way, I picked up all the stock (10 Sets) of X208 blades (picture attached) which is costing around 2$ here. I will send it to India  to my brother in Chennai and it will be made available for the forum members. This is not for profit and it may take one month time. Maximum two sets (10 blades) per member.
Note: If RCNeil21 had arranged for the blades my offer will be withdrawn.

I would like to book 2 sets (10 blades) right away. This knife that I received from Neil is a wonderful piece of equipment and comes in very handy while slicing Dollar Board Foam and Depron. The 45 degree cuts area cinch.

KK Sir, the product is just as good, trust me. Use it and you will be amazed with its utility.

Thanks again Neil!

rcparkjets thanks thats what i was explaining to everyone, that even though my product has chinese make its original.
And no i dont have any blades so you can sell them here. .
Also if you want you can sell the USA make cutters on this thread too
No problem VC sir

I have only 2 pieces remaining guys.
Also 1 piece i am willing to give for free but i dont know what should be the competition, i think i will put it up in the next sweepstakes
Thinking of it actually roman sir can use it (romanxdsouza) he scratchbuilds a lot so i will prospect on that too.

@rcparkjets.i would like to have 2 sets of blades (as and when they reach) so please do book them for me.
@rcneil. i completed my buid on saturday (for which you were eager) and had its first flight yesterday.attached is a pic of the same.
it flies really well and has good 3D capabilities.It has all the electronics i bought from you which is working flawlessly  .maybe i will just have to change the prop to 8x4.
Ive extensively used the xacto on this build.
the xacto is amazing.it got me super clean and accurate bevel cuts around my hinge edges .buying it was a super decision.dont how i would have gone about getting my edges without it  .it makes a 1st time bulider look like a pro....(..almost  )

Thats awesome, the edges and cuts look really neat, masterfully cut really beautiful. But i cant beleive that thats the electronics which was with me in a BOX it has been put to very good use and installed in that plane it looks really superb .

And as for prop do you think the motor can handle an 8x4? why dont you try an E-prop of 7x6 im  noob so its actually a question, . I have seen many 3d planes useing E-props. Also 1x XT60 was enough right? batt is the 1000mah?

I just have 1 piece left guys.
 

No takers for the last piece?

hey Neil! I'm game for the last piece.. how much for that, + extra blades?

Sent from a potato using a lamp

Hi Neil

Received my package Excellent packing.

Regards

Subir

Thank you .
Hope you like the product as well.

Neil

there goes your last piece

Hehe yup, actually its not the last, i do have two left. For gifting
But yes official lot is over. All sold, thanks guys and hope all the people who bought the cutter enjoy scratchbuilding with it.

URGENT
I want to buy this product please send your payment details on my mobile no


MOBILE NO. 8007239005
my email id:  jj377@live.com

Dear Sir
i want to buy X-ACTO foam cutter
please send the payment details with shipping charges on my mobile number or email address


Mobile No:   8007239005
Email id:   jj377@live.com

I am waiting for your reply

Hey guys posting on this thread after a long time, sorry for the inconvenience if anyone clicked on this thread to see if i have them back in stock. I dont sorry, have got a lot of pms and mails regarding the cutter.

But dont worry because you can still buy the cutter, not from me but from a good lhs, vibranthobbies. I am posting the product page link here.

   http://www.vibranthobbies.com/x-acto-foamboard-cutter.html