|
Title: Atmega 32 breakout board Post by: girishsarwal on June 10, 2013, 11:55:40 AM Guys
I got some PCBs manufactured for the gt-jtx but due to some confusion, the Atmega32 came up mirrored in the first lot. These are still fully functional as breakout boards for testing/experimenting as long as you can solder the ic on the copper side (so it gets mirrored once again). I'd have used these but have now upgraded the design. Take for free; local pickup. Can't ship. 5 available. See pictures for what all ports are available...and how the Atmega32/16 can be soldered for this to behave as a breakout board. GS Useful Tip: if you absolutely want to use an external oscillator, push it through from the component side, tack it down, and then solder the chip. Title: Re: Atmega 32 breakout board Post by: fxshoppe on September 12, 2014, 12:07:50 PM Hi girish
can i get these pcb. i wont mind paying for them Title: Re: Atmega 32 breakout board Post by: girishsarwal on September 12, 2014, 12:32:16 PM I think I've two of these left. You are welcome to collect. I've PMed you my mobile number. Would be interesting to know what you plan to do with these.
Title: Re: Atmega 32 breakout board Post by: lastRites on September 13, 2014, 05:50:35 PM Hi I have a question. Its a bit off topic, but I really want to know what would be the cost of producing such PCBs for a small run of, say, 10 boards?
Title: Re: Atmega 32 breakout board Post by: girishsarwal on September 13, 2014, 11:58:00 PM Trishit,
A small qty of that order would be about Rs. 300-350 a pc maybe. Title: Re: Atmega 32 breakout board Post by: lastRites on September 14, 2014, 10:40:54 AM Thank you!
|