RC India

RC Baazar => Free, Donations and Sweepstakes => Topic started by: dinkan on February 24, 2018, 07:51:23 PM



Title: Starting setup needed
Post by: dinkan on February 24, 2018, 07:51:23 PM
I am fascinated when I first saw the drone..which flyies over and then I make a decision that I should also need to build it up and fly in hands...but unfortunately I am a student and not have any capital..for it..can anyone help me in giving their old rc drone  parts inorder full fill my wish.I had attended many classes regarding..it and and I think I have some knowledge about it.plz can someone help me..

Sent from my Mi A1 using Tapatalk


Title: Re: Starting setup needed
Post by: AL HAM SHARI on February 24, 2018, 08:49:51 PM
Bro, everyone including me on this forum consists of students. I also didn't have any capital. I saved money for like 9 months before I started out with my first build. You should try saving money . Someone here will help you.


Title: Re: Starting setup needed
Post by: Aravind298 on February 24, 2018, 10:10:08 PM
I had saved for more than 1 year, in order to build my first drone. It was worth the wait.
So, waiting is not that bad ;D

Anyways, there will be people, ready to either lend you some items or giveaway their old stuff. Hope you find one soon!






Title: Re: Re: Starting setup needed
Post by: dinkan on February 25, 2018, 12:53:57 PM
I had saved for more than 1 year, in order to build my first drone. It was worth the wait.
So, waiting is not that bad ;D

Anyways, there will be people, ready to either lend you some items or giveaway their old stuff. Hope you find one soon!
Ok.broo....thanku.for ur support...but I think I just need some parts..as I have a carbon frame with 4 motors and and 3 esc .but I need a fc board and a transitter

Sent from my Mi A1 using Tapatalk


Title: Re: Re: Starting setup needed
Post by: dinkan on February 25, 2018, 12:55:06 PM
I had saved for more than 1 year, in order to build my first drone. It was worth the wait.
So, waiting is not that bad ;D

Anyways, there will be people, ready to either lend you some items or giveaway their old stuff. Hope you find one soon!
Thanks for ur support bro...I am also waiting and I had earned and bought some of it's parts but I need a esc and a fc

Sent from my Mi A1 using Tapatalk


Title: Re: Starting setup needed
Post by: AL HAM SHARI on February 25, 2018, 04:16:12 PM
Better off with a telemetry than a transmitter , get a telemetry and apm. Since , you cannot buy an fc now and then , don't buy kk boards. Buy APM, and telemetry. You can control the quad with a laptop or mobile phone. And, a normal Transmitter with basic setup do not have a range more than 2 km , while  basic 433mhz telemetry has a range of 3 km. And , it is not costly too. Buy telemetry, APM and GPS. Try buying second hand parts. And also , someone here will help with giving you if it's lying with them with no use.


Title: Re: Re: Starting setup needed
Post by: dinkan on February 25, 2018, 06:09:33 PM
Better off with a telemetry than a transmitter , get a telemetry and apm. Since , you cannot buy an fc now and then , don't buy kk boards. Buy APM, and telemetry. You can control the quad with a laptop or mobile phone. And, a normal Transmitter with basic setup do not have a range more than 2 km , while  basic 433mhz telemetry has a range of 3 km. And , it is not costly too. Buy telemetry, APM and GPS. Try buying second hand parts. And also , someone here will help with giving you if it's lying with them with no use.
Do u have second hand parts...broo

Sent from my Mi A1 using Tapatalk


Title: Re: Starting setup needed
Post by: AL HAM SHARI on February 25, 2018, 06:26:16 PM
I could send you a 20 amp ESC but , don't know if it's working now.


Title: Re: Starting setup needed
Post by: AL HAM SHARI on February 25, 2018, 06:27:05 PM
I will give it for free , for after 2 months you should return it back or you could buy it for a small token amount.


Title: Re: Starting setup needed
Post by: AL HAM SHARI on February 25, 2018, 06:27:52 PM
But don't know if it is working.


Title: Re: Starting setup needed
Post by: AL HAM SHARI on February 26, 2018, 05:33:05 PM
Update: It is not in working condition.


Title: Re: Starting setup needed
Post by: K K Iyer on February 26, 2018, 10:06:49 PM
@dinkan

You said you have a frame, 4 motors and 3 escs.
So now you may need a tx/rx, fc, power distribution board, 1 esc, props, lipo(s), charger, perhaps even bullet connectors. Right?
All that will be about 5-10k.

Wish you luck.

Meanwhile you could consider a toy grade quad for under 2k...

I usually lend equipment to newbies to help them start. But i find that they don't bother to return. Awaiting return of on a loaned tx/rx for last 2 months. If it comes back, you can have it.
Not free, not loan, but for a small price.


Title: Re: Starting setup needed
Post by: a3ruz on February 26, 2018, 10:13:41 PM
Happy to see yet another Keralite here
if you are in to drone racing hope you can join us
www.facebook.com/groups/droneracerskerala/


Edit
 ???




Title: Re: Starting setup needed
Post by: Aravind298 on February 26, 2018, 10:37:31 PM
Yeah. It's pretty rare that Mallus join RC, not that there aren't any. Great to see you!

Let it NOT divert the topic  :hatsoff:


Title: Re: Starting setup needed
Post by: AL HAM SHARI on February 26, 2018, 11:50:48 PM
Actually there are a lot of mallus in rc. But most of them I know are not in Rc India
 THEY KNOW ABOUT THE FORUM, but Idk.


Title: Re: Re: Starting setup needed
Post by: Asfakmhmd on March 05, 2018, 06:49:50 PM
Better off with a telemetry than a transmitter , get a telemetry and apm. Since , you cannot buy an fc now and then , don't buy kk boards. Buy APM, and telemetry. You can control the quad with a laptop or mobile phone. And, a normal Transmitter with basic setup do not have a range more than 2 km , while  basic 433mhz telemetry has a range of 3 km. And , it is not costly too. Buy telemetry, APM and GPS. Try buying second hand parts. And also , someone here will help with giving you if it's lying with them with no use.
Can we control the drone with apm and telemetry if so tell me how

Sent from my Redmi 3S using Tapatalk


Title: Re: Starting setup needed
Post by: Chiragthelegend12 on March 05, 2018, 07:02:00 PM
Edit : This reply was by mistake

 :hatsoff: