RC India
Welcome Guest, please login or register.
 
Pages: 1 [2] 3  All   Go Down
0 Members and 1 Guest are viewing this topic. Topic Tools Topic Tools 
Read
« Reply #25 on: June 03, 2014, 01:49:34 AM »
Feliks
Plane Lover
Active Member

**

Reputation Power: 1 
Feliks has no influence.
Offline Offline

City: Krakow ,Poland
State: OUTSIDE INDIA
RC Skills: Intermediate
Posts: 56
Join Date: Oct, 2010



Thanks Desmo of reminding us of the man who he liked the various interesting things to do ..

http://en.wikipedia.org/wiki/AeroVironment

This V8 Fireworks do not read my posts carefully and do not know that the inside of the wings is ... nothing ..
 
Well it looks like jeszce wing in cross-section, ie Naca Felix. and this is the name of the family that founded and requires determine what gaps, gfzie placed on which profiles also those bumps to the network, probably can be hundreds of types ..

http://www.new4stroke.com/airfoil2.jpg
Any real world application for this 4 Stroke?


Here .. I will do my prototype which acts from the top of the second wing multiplied by quantity and quantity received vacuum ..
 
Of course, you should quite carefully chosen angles of attack these wings and the distance between them ....



Then the pair of wings are fastened to the treadmill, instead of oxen to the appropriate spin speed and expected energy ....:hehe:

http://www.new4stroke.com/kierat2.JPG
Any real world application for this 4 Stroke?


Andrew Grin
Logged
 

Read
« Reply #26 on: June 03, 2014, 01:50:31 AM »
Feliks
Plane Lover
Active Member

**

Reputation Power: 1 
Feliks has no influence.
Offline Offline

City: Krakow ,Poland
State: OUTSIDE INDIA
RC Skills: Intermediate
Posts: 56
Join Date: Oct, 2010



Posted Today, 04:22
gruntguru, on 27 May 2014 - 00:58, said:
My money is on the oxen.. /quote
 
Oxen can become sick and will die. Besides then you must have 3 pairs of these oxen after 8 hours of work .. You know how much they eat ?  Not unless you are very rich .. :rolleyes:
 
can be several such pairs of wings with several compartments assemble and put on the ends of the pipes that supersede the broken windmill propeller .. There, at the end of the speed will be about 1 Mach .. Now you are at the disposal of the entire lift (lift) or how to get from the calculation of the efficiency of the above , about 7% of it you'll already have excess energy for 24 hours...
 
of course, each chamber will give others a vacuum, and therefore they must propel the various dimensions of the turbine, but connected on one axis ..

of course the whole family Naca Felix mission to be present. This is only the second descendant ..:rolleyes:
 
then are the chances of get sick of the high efficiency ..
 
The most important thing .. You know that the oxen have yet to clean up? ..:laugh:

http://www.new4stroke.com/several%20chambers.jpg
Any real world application for this 4 Stroke?


http://www.new4stroke.com/5-1332-5-mw-bard-near-shore-wind-turbine-erected-in-germany1.jpg
Any real world application for this 4 Stroke?


Andrew   Grin
Logged
 

Read
« Reply #27 on: November 25, 2014, 05:47:06 PM »
Feliks
Plane Lover
Active Member

**

Reputation Power: 1 
Feliks has no influence.
Offline Offline

City: Krakow ,Poland
State: OUTSIDE INDIA
RC Skills: Intermediate
Posts: 56
Join Date: Oct, 2010



Greetings to all from the Engine Expo 2014 in Novi Detroit ....

http://www.new4stroke.com/EXPO.jpg
Any real world application for this 4 Stroke?


http://www.new4stroke.com/EMYFORUM.jpg
Any real world application for this 4 Stroke?


http://www.new4stroke.com/Eplaque.jpg
Any real world application for this 4 Stroke?



I'm worried, because you will be some news about this new engine somehow obtain. As I wrote above, only 25% of the engines messages may come in handy .. The rest 75% you have to re-learn ..

Here are the materials you can download a PDF of the conference .. I am at the end of the first day, as it was in the schedule

http://www.ukintpress-conferences.com/conf/14exna_conf/index.php

http://www.ukintpress-conferences.com/conf/14exna_conf/download.php?conf_id=152&sess_id=1983&view=drill

Andrew Smiley
Logged
 

Read
« Reply #28 on: July 14, 2015, 01:10:05 AM »
Feliks
Plane Lover
Active Member

**

Reputation Power: 1 
Feliks has no influence.
Offline Offline

City: Krakow ,Poland
State: OUTSIDE INDIA
RC Skills: Intermediate
Posts: 56
Join Date: Oct, 2010



Next video of the Red Baron Windmill prototype "Effect spoons" ... Now, despite the simplicity of the prototype and are not necessarily matched the gap between the wing and the small fan, already takes off at a speed of 25 km / hour or 7 m / sec wind speed. At 40 km / h, the fan spins very quickly., Much better. than in the experiment with a single wing ..



Regards Andrew Grin
Logged
 

Read
« Reply #29 on: July 14, 2015, 01:11:31 AM »
Feliks
Plane Lover
Active Member

**

Reputation Power: 1 
Feliks has no influence.
Offline Offline

City: Krakow ,Poland
State: OUTSIDE INDIA
RC Skills: Intermediate
Posts: 56
Join Date: Oct, 2010




Here another video. The world's first Aerodynamics effect acting through blowing mouth. After puff heard hitting one wing of the second, and it's a loud ..




The pictures show the device to adjust the distance and angle between the wings
Yet research curiosity. Windmill spins better when opening the other wing is not blocked ..

..

http://www.new4stroke.com/viev1.JPG
Any real world application for this 4 Stroke?


http://www.new4stroke.com/viev.JPG
Any real world application for this 4 Stroke?


http://www.new4stroke.com/front.JPG
Any real world application for this 4 Stroke?


Andrew Grin
Logged
 

Read
« Reply #30 on: July 14, 2015, 01:14:03 AM »
Feliks
Plane Lover
Active Member

**

Reputation Power: 1 
Feliks has no influence.
Offline Offline

City: Krakow ,Poland
State: OUTSIDE INDIA
RC Skills: Intermediate
Posts: 56
Join Date: Oct, 2010



Now why I summoned Riccardo..Ricardo developed fairly firebox V-Comet .. Especially in diesel played a significant role - helped make a high speed diesel engine .In my also applied the swirl chamber, knowing about its merits. The eyebrow appearances, this is what you see on the animation, this is not the combustion chamber. It is only the cross section through the center of the engine combustion . At the rear, with the cross-sectional view as seen in the picture, it is a channel connecting the piston "sucking" piston "exhaust". Flows this way the entire load of fuel and air, but it achieves a very high speed, which in the initial attempts resulted in taking ionized air from between the spark plug electrodes and prevented the formation of spark .Only after a magnification of this channel, began to develop a spark. If sweeping spark plug, this place was a diesel injector, it would be very beneficial ,, because after falling into the space above the small pistons with a very high speed, it would be very intense spin and excellent mixing of fuel and air. I think it is possible to build a high speed diesel, well, up to 10 000 RPM. Also on gasoline this spinning is beneficial and Ground your walls on the smallest piston, is probably the smallest of the previously used, and the heat losses are the smallest .Also at such a high speed of rotation of the smallest piston samozapłonów foci formation will be very difficult. Apart from this place, burning virtually runs elsewhere, because the distance between the planes must be greater than two millimeters in height, so that there could arise a flame. In total combustion occurs with forced intensive centrifugation only over a small piston in the cylinder least .. This is the very Riccardo improved swirl chamber, with the movement of loads in one direction and forced mechanically great speed of combustion. Looking only at the same animations, we are not able to notice it all properly. Today on the combustion chamber.

http://www.new4stroke.com/blockspark1.jpg
Any real world application for this 4 Stroke?


Andrew Grin
Logged
 

Read
« Reply #31 on: July 14, 2015, 01:16:46 AM »
Feliks
Plane Lover
Active Member

**

Reputation Power: 1 
Feliks has no influence.
Offline Offline

City: Krakow ,Poland
State: OUTSIDE INDIA
RC Skills: Intermediate
Posts: 56
Join Date: Oct, 2010



Here, the film made using the experience to lift air wing. So yes, at the beginning of the film can be seen in the enclosure fan that blows the wind a piece of the wing, cut the stropianu, and nałożonegona these two metal rods that utzrymuja it in a horizontal position and transferred to the balanced Machinery with electronic scales, which shows the size of the wing lift when the wind blows at him with a fan .. size of this force is minimal and barely can observe the movement of machinery. The experience is best several possible KINDS wings of varying thickness profile, which can be changed in a device measuring and watch the size of the lift (which produces leaf vacuum) .. Thanks to this I like the wing of a set of experiments, it turned around and walked to the wing installed on your device . The wind from the fan created between them, comparatively very high vacuum. This vacuum is so huge that in gets called when I wanted to raise above the upper wing, lower, despite a solid metal load measuring machine, also raised very high up. This example shows that the strength of Spoon Effect, is several times greater than the single wing lift force, and thus, it is possible to use the vacuum between them several times larger ....
You see, with my theory, practice works well also..




Here on this simulation, made to explain the effect of ground on which it is about as shown in red, the increase in pressure, which float plane in the vicinity of the land that it represents a lower profile. And it is clear that the intensity of the red color that hypertension is very high and justifies the construction of such aircraft .it strongly an increased pressure in paktyce operates up to 3 meters above the flat surface of the earth
Coincidentally, in this simulation also shows a very intense blue vacuum which interests me, for good performance Windmill Red Baron. can be seen clearly very intense blue color, providing the emerging high-vacuum, which practically see in the video above .. Here are not only rake angles are important, but also the distance between these profiles, as well as setting between the longitudinal profiles, which is not necessarily also be symmetric. Also there is a completely new profile with a gap, certainly will little affect on its size.
After these few facts, I can estimate that the vacuum, with well-chosen all dimensions and angles profiles can be 20 times larger than the negative pressure created by a single profile .. It is a very good message for the Red Baron Windmill




Andrew Grin
Logged
 

Read
« Reply #32 on: July 14, 2015, 01:17:56 AM »
Feliks
Plane Lover
Active Member

**

Reputation Power: 1 
Feliks has no influence.
Offline Offline

City: Krakow ,Poland
State: OUTSIDE INDIA
RC Skills: Intermediate
Posts: 56
Join Date: Oct, 2010



Such a message regarding my two wings. When you are so positioned, with an angle of about 60 degrees, when you measured the exact speed of 4 m / sec wind from a fan, a small windmill starts at high speed ..
four meters per second is 14.4 km / h, it means that we can experiment while riding a bicycle ....

Andrew Grin
Logged
 

Read
« Reply #33 on: July 14, 2015, 01:19:33 AM »
Feliks
Plane Lover
Active Member

**

Reputation Power: 1 
Feliks has no influence.
Offline Offline

City: Krakow ,Poland
State: OUTSIDE INDIA
RC Skills: Intermediate
Posts: 56
Join Date: Oct, 2010



Quote from: jetman150;11374847
Can you use it to sipe out wind from pressure areas?  Say where there is interference, or where you might be able to use low pressure to create differentials for benefit?

So somehow luckily it happened, that we have such animations ... I did not have to do a lot of research

[YT]z1QOp_9IWLc[/YT]


http://www.new4stroke.com/viev.JPG
Any real world application for this 4 Stroke?


The wings are slots having a height of 2 mm and a length of 600 mm. or surface fissures through which you get negative pressure to the inside wing is 1200 mm ^ 2. Jarobiac the first model of this wing, I wanted to somehow very simple and cheap execute it. To derive this vacuum, I used a disposable syringe of 20 cc. It inside diameter of 22 mm .. or its surface, is 380 mm ^ 2. As you can see this is the narrowest section, which has to overcome the aerodynamic resistance of the vacuum. This section is very unfavorable, because it is up to 1200/380 = 3.15 lower than the inlet gap .. He should be at least equal to the area of ??the gap, or three such tubing from a syringe .And we have only one wing. Despite this, the fan, which is for the help transition to a higher diameters, ie D = 36 mm or 1017 mm surfaces ^ 2 ie more than two times greater than the tube Inlet, rotates, already at 4 m / sec ..and I think that this it is all very good, despite the primitive prototype, but the first on .. But it proved that way then you should follow..

Andrew:D
Logged
 

Read
« Reply #34 on: July 14, 2015, 01:20:12 AM »
Feliks
Plane Lover
Active Member

**

Reputation Power: 1 
Feliks has no influence.
Offline Offline

City: Krakow ,Poland
State: OUTSIDE INDIA
RC Skills: Intermediate
Posts: 56
Join Date: Oct, 2010



In 1969 I started my professional work of a sound engineer and music electronics with such a team, "Dzamble" which sang Andrzej Zaucha .... took a wonderful three years ..



Andrew Grin Grin
Logged
 

Read
« Reply #35 on: July 14, 2015, 01:20:47 AM »
Feliks
Plane Lover
Active Member

**

Reputation Power: 1 
Feliks has no influence.
Offline Offline

City: Krakow ,Poland
State: OUTSIDE INDIA
RC Skills: Intermediate
Posts: 56
Join Date: Oct, 2010



So once again we return to the thermodynamic efficiency new4stroke .. Here the hearing of the efficiency of the charts made for the traditional engine.
https://www.mhi.co.jp/technology/review/pdf/e451/e451021.pdf

You can see on the chart with the highest efficiency is low speed engine sea, which is 47%.
My engine as reported above, draws about 360 cc more than the old conventional engine, which did a prototype or 600 ccm ... But this extra volume displacement, is implemented by the system of pistons which rotate two times slower, ie, the force of inertia are four times smaller, because they are dependent upon the square of the rotation. that is, we can just to count the inertial forces relative to the sucked air further. 360 ccm divided by four is going to give us 90 cc. These 90 ccm going to beat the additional forces of inertia (ie a total of friction). But now we have a net profit of 360 ccm minus 90 cc = 270 cc. It is pure extra profit aspirated air, without any mechanical losses already on its construction .. that is entirely theoretical operational efficiency engine so it looks .. traditional engine of 600 cc is 47%, ie 12, 76 ccm is 1% plus an additional 270 cc, which is 270 divided by 12,76 = 21% additional efficiency .. So the total increase the efficiency regarding displacement capacity should be at 47 +21 = 68%. additionally, we can still make a profit energy by stopping propelling Similar systems poppet valves and springs which will have at least the 7% efficiency more .. So, the total physical ability of such an engine 68% + 7% = ~ 75%  .

ie it is to increase efficiency, which can not be subject to discussion.

If we add all the above mentioned advantages, no such low temperature in the combustion chamber, the combustion speed, and more, which can contribute to higher efficiency even further by around 5% this will give us the final number of efficiency of up to 80% .....
Andrew  Grin Grin
Logged
 

Read
« Reply #36 on: July 14, 2015, 08:05:08 AM »
rcpilotacro
Global Moderator
Forum Hero

*****

Reputation Power: 58 
rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.
Offline Offline

City: Delhi
State: Delhi
RC Skills: Advanced
Posts: 5041
Join Date: Nov, 2010

Practice, and only Practice will make you perfect



Dear Andrew

Extremely impressive, couple of thoughts

1. I see you are tapping the Adverse pressure gradient, Boundary Layer Control (Sdova Progranchinova Sloya or whatever as it was called in Russian) of suction and blowing existed since post WWII. You know that. But the problem of tapping the air from separation or near separation points are
  
    (a) The rear stagnation point climbs up on the wing, which means this happiness cannot last forever. there will pulsation of the pressure tapped

     (b) Twisting moment of the wing will be high, which means the wing support hub has to be strong and the aerofoil itself needs to be made incorporating aeroelastic tailoring

By no means i am saying it is not a viable concept, it is very viable, renewable and has the potential for further research

I must place on record your good work and passion for the concept (and music of course) Thumbs Up

please read http://enu.kz/repository/2010/AIAA-2010-1007.pdf


PS
Rotary engines today have very high efficiency because of not being a reciprocating motion

PPS
I wouldn't put too much money on nasa's Foilsim, ver-1 on Joukowsky aerofoil transformation had little bit of my contribution, for starters, transition and separation point is not depicted in Foilsim, whereas for you application i believe it is crucial

« Last Edit: July 14, 2015, 10:29:45 AM by rcpilotacro » Logged

Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can’t get it wrong.
 

Read
« Reply #37 on: July 26, 2015, 09:28:45 PM »
Feliks
Plane Lover
Active Member

**

Reputation Power: 1 
Feliks has no influence.
Offline Offline

City: Krakow ,Poland
State: OUTSIDE INDIA
RC Skills: Intermediate
Posts: 56
Join Date: Oct, 2010



Thank you for the very useful repository rcpilotacro  Bow


Windmills are good, but you need a wind to their work ...
But here the way we can, even in a closed room, well, for instance in the basement of the house, "produce wind" .. Just, the Starting a device, manually, to the speed of 18 m / sec..To are few, it is 1 turn per second.
I've been to all these wings Windmill Red Baron, will operate the wind, at the speed of 18 m / sec ..
If we consider, in simulator NASA and the effect of "spoon" is theoretically You will receive an strength of resistance to "lift force" (vacuum). and is about 15 times less ..
So the resistance force, it is only around 6% received "lift force"
I think that even with a very negligent and mismanagement execution of such a machine, it will propel herself after the first start-up .. And we should still get some electricity .. Case, jet just how much ..

http://www.new4stroke.com/dimension.jpg
Any real world application for this 4 Stroke?



description:

http://www.new4stroke.com/description.jpg
Any real world application for this 4 Stroke?


Vane drive:

http://www.new4stroke.com/vane%20drive.jpg
Any real world application for this 4 Stroke?





http://www.new4stroke.com/treadmill.mp4

or  https://www.youtube.com/watch?v=mt1DEHlZ0Kc


Regards Andrew Grin
Logged
 

Read
« Reply #38 on: July 26, 2015, 09:31:52 PM »
Feliks
Plane Lover
Active Member

**

Reputation Power: 1 
Feliks has no influence.
Offline Offline

City: Krakow ,Poland
State: OUTSIDE INDIA
RC Skills: Intermediate
Posts: 56
Join Date: Oct, 2010



We must take care to harmful aerodynamic resistances as low as possible ..
Because, after all, and two revolutions per second can turn the wings .. It is 120 km / h .. Pretty on the wind.
This cover should be good.

http://www.new4stroke.com/cover.jpg
Any real world application for this 4 Stroke?


Can of some use ..

http://enu.kz/repository/2010/AIAA-2010-1007.pdf

Andrew  Grin
Logged
 

Read
« Reply #39 on: July 31, 2015, 07:40:32 AM »
Feliks
Plane Lover
Active Member

**

Reputation Power: 1 
Feliks has no influence.
Offline Offline

City: Krakow ,Poland
State: OUTSIDE INDIA
RC Skills: Intermediate
Posts: 56
Join Date: Oct, 2010



If the vacuum looks like the animation spoon wings, it is seen that it has a range before the profile wings. Perhaps the the vacuum will suck the new air between the wings and hence a marked decrease their frontal resistance ..

https://www.youtube.com/watch?v=z1QOp_9IWLc&feature=youtu.be


Here a version with a large vane Engines .. I do not know yet what dimensions it should be .. Maybe even a big and then it will be adjusted to the amount and pressure created by the wings



Andrew Grin
Logged
 

Read
« Reply #40 on: August 03, 2015, 01:12:04 AM »
Feliks
Plane Lover
Active Member

**

Reputation Power: 1 
Feliks has no influence.
Offline Offline

City: Krakow ,Poland
State: OUTSIDE INDIA
RC Skills: Intermediate
Posts: 56
Join Date: Oct, 2010



Once upon a time there was no internet .. Even with the video was difficult .. only movies .. I have survived such films showing such beautiful cars with large wings .. I once suggested that such a wing but the bulge facing down ..but not all of it like .. it turned out that such huge wings were already in use .. Now can a wing of such large dimensions but the double - spoon effect .. interesting how many vacuum that could, if NACA-profile Felix apply any .. maybe above a certain speed .. .....

http://www.new4stroke.com/skrzydlo8.jpg
Any real world application for this 4 Stroke?



http://www.new4stroke.com/skrzydlo9.jpg
Any real world application for this 4 Stroke?



Andrew Grin
Logged
 

Read
« Reply #41 on: August 11, 2015, 02:59:23 AM »
Feliks
Plane Lover
Active Member

**

Reputation Power: 1 
Feliks has no influence.
Offline Offline

City: Krakow ,Poland
State: OUTSIDE INDIA
RC Skills: Intermediate
Posts: 56
Join Date: Oct, 2010



Yesterday marked the 70th anniversary of explosion atomic bomb in Nagasaki. the first theoretical founder Joseph Rotblat it was ..

https://www.wagingpeace.org/tag/joseph-rotblat/

quoted below what was his attitude to scientific discoveries:

"Hind al. [16] pointed out that the unpredictability switched
petent research makes such a project
difficult, if at all possible. But such a project
of it becomes meaningful if based on ethical principles.
Rotblat was of the opinion that the foundations of ethics should form
part of the training of all scientists. He wanted,
that universities have adopted some sort of cited above
oaths, and to students of natural filed
such a vow when finish their studies, and listened to lectures
on the ethical aspects of science. Relying on his conscience
and the good will of individual scientists not in itself
It will be sufficient, since the units are often unreliable.
Therefore called for the establishment of a number of ethics committees,
which might consider science projects that may affect
human life, some kind of medical committees
ethical. Consent ethics of such a committee would be required
for funding a particular direction of research.
In later life, Rotblat opposed
research conducted in secret, which is often
in the case of government research and industrial applications. He believed
that new knowledge to be shared. He moved a problem
associated with the commercialization of research, since many studies
carried out in universities were funded
from commercial sources. This could influence the direction
study, put at risk the ethical problems and increase the mystery.
He also began to hate the patenting of results
research, because in his opinion, knowledge should be
available for free. But scientists themselves often impose secrecy.
because they want to keep other scholars in the dark
until publication, because a person who
First it publishes, often gets awards and honors.
These views Rotblat that come with early stages
his career and matured over a lifetime, are a bit naive,
because competition, secrecy
and commercialization are part of learning. He simply wanted
resist these pressures "

I like it..

Andrew Grin
Logged
 

Read
« Reply #42 on: August 12, 2015, 07:55:10 PM »
Feliks
Plane Lover
Active Member

**

Reputation Power: 1 
Feliks has no influence.
Offline Offline

City: Krakow ,Poland
State: OUTSIDE INDIA
RC Skills: Intermediate
Posts: 56
Join Date: Oct, 2010



Here this car..

http://www.new4stroke.com/Spoon%20Red%20Baron%20Car.jpg
Any real world application for this 4 Stroke?


Andrew Grin
Logged
 

Read
« Reply #43 on: August 12, 2015, 07:58:17 PM »
Feliks
Plane Lover
Active Member

**

Reputation Power: 1 
Feliks has no influence.
Offline Offline

City: Krakow ,Poland
State: OUTSIDE INDIA
RC Skills: Intermediate
Posts: 56
Join Date: Oct, 2010




Quote from: Thepanzerfuhrer;32937258
If I employed this wing technique on say a convertible mustang, how much reduction could I expect in my corrected et?

for it is not such a simple thing .. My drawing is only a theory, and even to good its use probably still need many experiences .. It's like a first flight .. Here we see that one of the first aircraft was driven by the wheel to become independent by the wind .. https://en.wikipedia.org/wiki/Gustave_Whitehead
Now that the simulator airfoil from NASA perfectly we can see that even minimal changes in some parameters, the cause, the whole project can not go wrong .. You can discern that the value of lifting force to the resistance can take very extreme value. THEREFORE should be chosen carefully all the values. RELATIONSHIP TO RESISTANCE to the lift of WAS AS 1: 10 ..
For the time being we do not have a simulator to "spoon effect", the distance and angle of attack of wings .. But we can assume based on experience, that it will have a value, after careful about choosing the least 3 times larger than the two single wing, that is, if we simulator one wing lift 37 pounds is two give us 74 pounds .. multiply it by spoon effect. that is, times 3, which gives us 222 pounds of force "propellants", in relation to the resistance, which is 7.4 pounds ... So theoretical gain is about 30 times .. Now, from our skills and experience will depend on how much practically with the profit we will they could utilize to drive a car .. it is a very big number, and even if almost ten times we reduce it, it will be us coefficient 3, for a clean drive a car .. so it all depends on how it practically execute ..

http://www.new4stroke.com/Cardraglift.jpg
Any real world application for this 4 Stroke?


Andrew Grin
Logged
 

Read
« Reply #44 on: March 15, 2016, 05:21:58 PM »
Feliks
Plane Lover
Active Member

**

Reputation Power: 1 
Feliks has no influence.
Offline Offline

City: Krakow ,Poland
State: OUTSIDE INDIA
RC Skills: Intermediate
Posts: 56
Join Date: Oct, 2010



Here the newest model of the wind my car .. Only cosmetic changes on the outside .. Smiley

http://www.new4stroke.com/newmodel.jpg
Any real world application for this 4 Stroke?


But inside the revolution ..
I present two screenshots of the simulator NASA airfoil and it is clear that at different angle of attack with a symmetrical profile, receive different values ??of lift .. From negative to positive .. or 160 KG positive, or 160 kg (320 lbs) negative (downward pushing sash) when changing the angle of attack of 30 degrees .. and dimensions of the wings 2, 5 meters square at a speed of 100 km / h (60 miles)

http://www.new4stroke.com/foilplus.jpg
Any real world application for this 4 Stroke?



http://www.new4stroke.com/foilminus.jpg
Any real world application for this 4 Stroke?


Well, this wing of their forces can drive the crankshaft directly ..
Here, the animation .. The angle of attack of the wing can change either electrically or mechanically (cam) There is no need for this high energy ..


https://www.youtube.com/watch?v=evC5y0wgOVM&feature=youtu.be

Well needless to say that such a system also can work at creating their own wind ... ..

Andrew Smiley
Logged
 

Read
« Reply #45 on: April 11, 2017, 05:37:47 PM »
Feliks
Plane Lover
Active Member

**

Reputation Power: 1 
Feliks has no influence.
Offline Offline

City: Krakow ,Poland
State: OUTSIDE INDIA
RC Skills: Intermediate
Posts: 56
Join Date: Oct, 2010



Or maybe a two-wheel car would do ... There's no need for an differential and anything .. see the Segway
There is no steering wheel, and what's the return .. because let's say on wheels 1.5 meters in diameter ... for every trimmer will come ..

http://www.new4stroke.com/Segway.jpg
Any real world application for this 4 Stroke?


Such a Segway with a comfortable seat and visor, it could be called Feliks Car

Regards Andrew  Grin
Logged
 

Read
« Reply #46 on: April 11, 2017, 05:38:40 PM »
Feliks
Plane Lover
Active Member

**

Reputation Power: 1 
Feliks has no influence.
Offline Offline

City: Krakow ,Poland
State: OUTSIDE INDIA
RC Skills: Intermediate
Posts: 56
Join Date: Oct, 2010



Or maybe a two-wheel car would do ... There's no need for an differential and anything .. see the Segway
There is no steering wheel, and what's the return .. because let's say on wheels 1.5 meters in diameter ... for every trimmer will come ..

http://www.new4stroke.com/Segway.jpg
Any real world application for this 4 Stroke?


Such a Segway with a comfortable seat and visor, it could be called Feliks Car

Regards Andrew  Grin
Logged
 

Read
« Reply #47 on: May 03, 2018, 09:59:03 PM »
Feliks
Plane Lover
Active Member

**

Reputation Power: 1 
Feliks has no influence.
Offline Offline

City: Krakow ,Poland
State: OUTSIDE INDIA
RC Skills: Intermediate
Posts: 56
Join Date: Oct, 2010



http://www.new4stroke.com/segcarfeliks.jpg
Any real world application for this 4 Stroke?


So I have to thank that good people brought me to the ground with my Segway Car Felix ... I of course have invented it completely unmistakably, never seen such a solution .. But I was provided with my much earlier (2011) professional Segway rules here a few photos.

http://www.new4stroke.com/gm%20seg.jpg
Any real world application for this 4 Stroke?




Andrew Smiley
Logged
 

Read
« Reply #48 on: September 12, 2018, 04:50:55 AM »
Feliks
Plane Lover
Active Member

**

Reputation Power: 1 
Feliks has no influence.
Offline Offline

City: Krakow ,Poland
State: OUTSIDE INDIA
RC Skills: Intermediate
Posts: 56
Join Date: Oct, 2010



We'll be back in time a bit, for the first project ...

Here with a sketched diagram in cylinders. the basic standard norm poped by the timing.
You can see a huge difference in capacity volume and its asymmetry ..
Adding well-done gasodynamic phenomena, the volume of one cylinder can even be 700 ccm of really sucked air, with a basic piston of 300 ccm.
Well, it's a little not  surprising to receive this 200 hp at 5000 rpm with 1 liter of basic capacity ..

http://www.new4stroke.com/volume1.jpg
Any real world application for this 4 Stroke?


But of course I understand that my experience and knowledge is not needed for anyone ... You can start from the very beginning and ... lose a few years to get what I already know ...

Andrew Grin
Logged
 

Read
« Reply #49 on: September 12, 2018, 09:30:20 AM »
sanjayrai55
Plane Lover
Forum Hero

*****

Reputation Power: 85 
sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.
Offline Offline

City: Gurgaon
State: Haryana
RC Skills: Intermediate
Posts: 8337
Join Date: Dec, 2011

Don't wake a Tiger until you've factored the teeth



Andrew

Quote:
In later life, Rotblat opposed
research conducted in secret, which is often
in the case of government research and industrial applications. He believed
that new knowledge to be shared.
Unquote

Human Nature is greed oriented. Without monetary reward many bright minds will not be motivated to take up research
Logged

 

Pages: 1 [2] 3  All   Go Up
Jump to: