RC India
Welcome Guest, please login or register.
 
Pages: [1]   Go Down
0 Members and 1 Guest are viewing this topic. Topic Tools Topic Tools 
Read
« on: December 12, 2017, 11:42:56 AM »
gaurang.1972
Plane Lover
Forum Hero
*****

Reputation Power: 13 
gaurang.1972 has no influence.
Offline Offline

City: Ahmedabad
State: Gujarat
RC Skills: Intermediate
Posts: 659
Join Date: Dec, 2012




 
Aurora model engines (India)
HOME > ENGINE ARTICLES > Aurora model engines (India)
Aurora Model Engine History
 In this article I’ll attempt to summarize the history of one of the two major model engine manufacturers to have operated in India – the Aurora Model Manufacturing Co. Pvt. Ltd. of Calcutta, India (now correctly rendered as Kolkata). The other such manufacturer is Sharma Model Aero Engines & Propellers of Jodhpur, India, whose story has been recounted in a separate article on this website.
Right off the top, it's necessary to draw the reader's attention to the fact that the engines which I'll be discussing here have absolutelynothing to do with the Aurora Tornado .049 engines which were manufactured in the USA by K&B for the Aurora Plastics company in 1959-1960. The Indian and American Aurora companies are completely distinct entities having no mutual connection whatsoever. The Aurora Tornado engines were manufactured by K&B for use in Aurora Plastics' RTF models. The present article is concerned solely with the unrelated Aurora model engines manufactured in India.
 The Aurora company (as I will call it for the balance of this article) of India is best known for the Mills .75 and 1.3 reproductions which it manufactured in substantial numbers between 1965 and 2013. However, its activities extended well beyond the realm of Mills reproduction, as we shall see in due course.
Before getting started on the telling of this story, I must fulfil both a duty and a genuine pleasure by acknowledging the very considerable amount of help that I received from the present owner of the Aurora company, Mr. Rishi Kumar. There’s no substitute for first-hand information, and Rishi was kind enough both to share his own personal recollections and to search through the company records to confirm a number of key dates and events in the company’s history. All documents cited in this article remain on file with the Kumar family. Rishi also provided a number of photographs which greatly enhanced the telling of this story.
In sharing his direct personal knowledge of the company’s operations over the years, Rishi was able to clear up a number of mysteries and myths surrounding the activities of the Aurora company. I freely admit that I could not have even begun this article without Rishi’s help - indeed, it’s very difficult for me to adequately express my deep appreciation of his efforts. All of us who remain interested in model engine history are in his debt.  
With that pleasant duty fulfilled, it’s time to get on with the telling of the tale. The Aurora story is actually an unexpectedly interesting one with a strong British connection. I hope you find it as engaging as I did!
The Early Years
 Many model engine enthusiasts from outside India know the Aurora company of India solely for their Mills reproductions, remaining blissfully unaware of their broader range of products. In reality, the company had its roots in the model kit business rather than the manufacture of model engines, which came later. The company remains active in the kit business to this day (early 2017), over 60 years after its establishment .
The Aurora model manufacturing company had its beginnings as long ago as 1955, when Calcutta businessman and keen model enthusiast Mr. Suresh Kumar (1922 – 2010) decided that he wished to become involved in the manufacture of flying model kits. This was very much a labour of love, because the Kumar family had many other business interests. Among other ventures, the family operated the well-known Mirta Lina ladies’ fashion store on Park Street in central Calcutta (as I will continue to call the city given the general familiarity outside India with that rendition).
In 1955 Suresh Kumar (then 33 years old) took over a 200 square foot mezzanine space in the family’s Mirta Lina premises on Park Street, producing kits for balsa chuck gliders at that location. At this stage only two employees were on the payroll.
The fledgling model kit business grew steadily, to the point at which Mr. Kumar decided that further expansion of the company’s product range was warranted. In 1957 he commenced negotiations with Model Aeronautical Press (MAP) of England with a view towards obtaining permission to kit a number of their more popular published plan designs. A search of company records by Suresh Kumar’s younger son Rishi (present owner of the company) revealed that the initial authorization for the manufacture of kit versions of a number of MAP designs finally came in the form of a letter from MAP dated July 9th, 1958. A number of these designs continue to be offered in kit form today (2017).
 At the same time, the model manufacturing activities were relocated from Mirta Lina to larger premises located on a 1000 square foot mezzanine floor at 1A Russell Street above what is now India’s Hobby Centre on the corner of Park Street and Russell Street in Calcutta. Business had grown to the point at which 6 employees now worked in the model kit division. At this stage, model engine manufacture was still a thing of the future.
It’s worth mentioning in passing that the India’s Hobby Centre stores became major sales outlets for modelling goods in India. There were eventually no fewer than 6 branches at various locations across India, located in Calcutta, Delhi, Bombay, Bangalore, Madras and Hyderabad. All but Hyderabad opened in the period from the late 1950’s to the mid 1960’s. Hyderabad opened in 1977. A few of these outlets still exist today.
Returning to our main thread, the real turning point for Mr. Suresh Kumar’s involvement in the model industry came in 1963, when he visited England for the purpose of further developing some of his connections there. Among other things, this visit resulted in the issuance of letters dated May 8th and 25th, 1963 clarifying and re-confirming his right to produce MAP designs in kit form. Those letters remain in effect and on file today (2017).
 However, it didn’t end there! Mr. Kumar was interested in expanding his range of model kits, but wished to do so as before on the basis of proven designs. To that end, he met with Henry J. Nicholls of the famous 308 Holloway Road model supply business in London. These meetings resulted in the issuance  by Mercury Models Ltd. of a license dated May 16th, 1963 authorizing Aurora to manufacture and distribute Mercury kit designs, albeit exclusively within India. This license remains in effect today (2017).
During the course of his meetings with HJN, Mr. Kumar was introduced to Nicholls’ long-time associate Dennis Allen, then involved with the Merco engines as well as the Allen-Mercury (A-M) diesel series. This meeting was to have consequences of its own, as we shall see in due course.
In summary, by early 1963 Mr. Kumar had been active in the model kit business for some eight years and was actively and successfully pursuing a broader involvement in that field. However, circumstances had arisen which were to stimulate his interest in expanding his involvement in the model trade to include the manufacture of model engines. We’ll turn to that in the following section of this article.
The Aurora-Mills Connection
 In a separate article on this site, I’ve outlined the production history of the Mills range. David Owen and I have also presented information on the many and varied Mills replicas and reproductions which have appeared over the years following the cessation of original Mills model engine production in 1964.
For the present article, it will only be necessary to follow the Mills story forward from 1960 to the point at which Mr. Kumar’s Aurora company became the proprietors of the Mills assets. Readers interested in the bigger picture are referred to my previously-linked articles on the Mills engines.
Until 1960 all rights to the Mills model engine marque were of course held by Mills Brothers (Model Engineers) Ltd. That company was acquired in 1960 by Ayling Industries, an organization having a far broader scope in terms of their business interests. Naturally, Ayling became the owners of the Mills physical and intellectual property at that point. Mills Brothers (Model Engineers) Ltd. remained in operation as an Ayling subsidiary, continuing to hold all the Mills rights on behalf of the parent company. Production of the Mills engines continued as before, albeit now as an Ayling subsidiary operation.
However, it’s readily apparent from later events that the purchase of Mills Brothers by Ayling was largely driven by a desire to re-direct the former Mills Bros. facilities at Woking into the more lucrative full-sized aviation sub-contract market which had been exploited earlier by the management of their Mills Brothers subsidiary. For more information on that aspect of Mills Brothers activities, readers are once again referred to my separate article on Mills production history.
This being the case, it’s clear that Ayling had no real interest in continuing their subsidiary company’s involvement with model engine production. On the contrary, they were very much open to the idea of selling off their model engine interests to some interested buyer. This situation had apparently become well known in the trade as 1963 rolled around.
Mr. Kumar was made aware of the availability of the Mills assets either before or during his 1963 visit to London. In order to evaluate the possibility of Aurora acquiring the Mills assets, a meeting was arranged at Woking during Mr. Kumar’s London visit. The initial negotiations which took place at that meeting were confirmed in a letter from Mills Brothers to Mr. Kumar dated May 9th, 1963.
After Mr. Kumar’s return to India, negotiations continued throughout the balance of 1963 and the whole of 1964. In the interim, production of the Mills engines by Mills Brothers continued until mid 1964, when Ayling finally announced that all Mills model engine manufacture at Woking would be discontinued. Owners of the many thousands of original Mills engines which remained in service were not abandoned – original spare parts for those engines continued to be made available through a retail outlet called Woking Models.
The negotiations between Mr. Kumar's Aurora company and Mills Brothers were finally concluded in early 1965. A revenue receipt dated April 24th, 1965 remains on file at Aurora. This receipt confirms the completion of the Mills purchase, including the transfer of title to the Mills name, worldwide manufacturing rights, designs, original master drawings, production tooling, die-casting equipment and residual component stocks.
The die-casting equipment had been in the hands of a firm called Stone-Wallwork (Charlton) Ltd. of Woolwich Road, Woolwich, London SE7 which had evidently been supplying the crankcases for the original Mills engines. In a letter dated April 24th, 1965, Stone-Wallwork confirmed that they had forwarded this equipment to Mr. Kumar in Calcutta.
Finally, in a follow-up letter dated April 30th, 1965, Mills Brothers formally confirmed the complete cessation of all Mills engine-related activities at Woking. This left the future of the Mills range entirely in Mr. Kumar’s hands.
Aurora Model Engine Production Commences
Having secured the rights to the Mills range, Mr. Kumar set about developing the required production facilities. Model engine manufacture is a very different line of business from balsa kit manufacturing, making it essential that new facilities be secured. Accordingly, Mr. Kumar took premises in the Shalimar area on Foreshore Road in Calcutta and commenced the process of setting up a machine shop there.
The steps involved in getting the new manufacturing facility into operation took some nine months. The dies had to be received from England, and arrangements had to be made with a local foundry which could use these dies to produce the necessary castings. The required machine tooling also had to be assembled. All of the company’s lathes and grinding equipment at this early stage were WW2 surplus items which were purchased at auction. Finally, the original Mills jigs and fixtures had to be deployed and their use fully appreciated by the workers who would make the engines.
 In the meantime, Mr. Kumar re-registered his company under the name of the Aurora Model Manufacturing Co. Pvt. Ltd, hereinafter shortened to just plain Aurora. According to Indian corporate records which are available on the Internet, this registration took effect on February 10th, 1966.
It was soon thereafter that the manufacture of Mills .75 and 1.3 engines resumed at the Foreshore Road location, using the original Mills Brothers production equipment, tooling, jigs and fixtures as well as utilizing castings produced using the original Mills dies. The major change was the use of castings formed in plain aluminium alloy rather than the chromate-blackened magnesium alloy components formerly used. At the same time, the familiar yellow Aurora label was introduced.
The early examples of the K75 and K1.3 Mills models (as they were designated from the outset by their manufacturer) featured crankshafts which were made of mild steel. Unfortunately, these were readily bent in a crash, besides having less-than-optimal wearing qualities. An improved steel was eventually specified for these components, which greatly improved the engines’ durability. The material used for the con-rods was also upgraded.
Logged
 

Read
« Reply #1 on: December 12, 2017, 11:46:15 AM »
gaurang.1972
Plane Lover
Forum Hero
*****

Reputation Power: 13 
gaurang.1972 has no influence.
Offline Offline

City: Ahmedabad
State: Gujarat
RC Skills: Intermediate
Posts: 659
Join Date: Dec, 2012



Mr. Kumar absorbed some criticism for the quality issues associated with the early Aurora Mills models, which I personally consider to be quite undeserved because he was a genuine enthusiast who undoubtedly did his very best to deal with the various issues about which people complained. As a result of his efforts, the later engines were far better made, including the previously-mentioned use of superior materials for the crankshafts and conrods. In particular, piston/cylinder fits on all models were generally excellent throughout. As Rishi Kumar so eloquently puts it, the employees responsible for those fits had "golden hands"!
One issue which has come up time and time again over the years is that of the "staggered" induction and transfer porting which is a normal feature of the Aurora Mills engines. People have commented adversely upon the fact that the twin drilled holes which make up both induction and transfer ports are not drilled at the same vertical elevation, causing one of the pair to open before the other. This has often been cited as evidence of sloppy workmanship on the part of the Aurora employees.
In reality, most original Mills engines exhibit this same feature. Moreover, Rishi Kumar tells me that the relevant cylinder porting jigs obtained by his father from Mills Brothers are specifically set up this way - the porting in the Aurora Mills engines was formed using those original jigs. This is therefore an original Mills design feature as opposed to a manufacturing error. It would result in higher initial gas velocities, which might in turn contribute to the engines' excellent starting characteristics. Whatever the motivation, Rishi tells us that the original Mills Brothers jigs in Aurora's possession reflect this structural feature.
The above discussion leads up to a somewhat controversial point – should the Aurora-made Mills engines be called “replicas” or “reproductions”? The Kumar family is understandably quite definite on this point – as far as they’re concerned, the Aurora-produced engines are not “replicas” at all – rather, they’re simply a continuation of the Mills range using the same designs and production equipment, albeit produced by a different manufacturer at a distant location. In their view, the term “reproduction” better describes the status of the Aurora Mills engines. Although this point is undoubtedly open to debate given the different materials and finishes used for the Aurora castings, I will defer to the family’s wishes by using the term “reproduction” when discussing the Mills .75 and 1.3 models produced by Aurora. I'm personally quite comfortable with that term.
The Aurora-made Mills engines were initially marketed in India, but efforts were soon commenced to extend their marketing outreach to other countries. These efforts proved to be quite successful in the long run - Carlson Engine Imports of Phoenix, Arizona, became a major US distributor, while Mick Wilshire of Super Tigre Engines UK became a major sales agent in the UK. Australian sales were handled by Mike & Tony Farnan of Model Engines, Melbourne.
But that was later ...... meanwhile, back in the mid 1960's, plans were afoot to expand the range of model engine products marketed by the Aurora company.
The Aurora Model Engine Range Expands
 As mentioned earlier, a key individual with whom Mr. Kumar met during his 1963 visit to London was Dennis Allen, who had long been associated with Henry J. Nicholls and Mercury Models through his Allen-Mercury (A-M) model engine range as well as the Merco engines which he was also manufacturing by that time. This contact resulted in further discussions leading to the assignation to Mr. Kumar of Indian distribution rights for the A-M model diesels.
This agreement was formalized in 1965 at the same time as Aurora’s new model engine manufacturing facility on Foreshore Road was becoming operational. Mr. Kumar was also successful in arranging for distribution rights to certain FROG models, which were secured from Alan Hales of the A. A. Hales organization which owned the FROG model engine range at the time in question.
The tangible result of these discussions was the 1966 appearance in the Indian marketplace of several of the A-M models, notably the  A-M 15 (1.5 cc) and A-M 25 (2.5 cc) models, as well as the FROG 149, 249 and 349 models. At this stage, and for some years thereafter, the Mills .75 and 1.3 reproductions were  the only engines actuallymanufactured by Aurora.
Another significant move in 1966 was the co-location of the model kit manufacturing operations with the model engine production facilities at Foreshore Road. By this time, Aurora’s kit division employed 10 people, while the engine manufacturing activities provided work for 12 more individuals. Evidently the Aurora Mills reproductions were selling well at this stage.
In 1969 the range of model engines manufactured by Aurora was expanded with the securing of name, design and manufacturing rights to the iconic Taplin Twin diesel from England. A number of these engines were produced by Aurora, some of which used certain original components which were acquired in the deal. As with the other Aurora model engines at this time, quality of these twins was somewhat variable, but a good one was very good.
Logged
 

Read
« Reply #2 on: December 12, 2017, 11:46:54 AM »
gaurang.1972
Plane Lover
Forum Hero
*****

Reputation Power: 13 
gaurang.1972 has no influence.
Offline Offline

City: Ahmedabad
State: Gujarat
RC Skills: Intermediate
Posts: 659
Join Date: Dec, 2012



Expansion and Challenging Times at Aurora 
 As Aurora’s business continued to expand, a further move was made in 1970 when the company’s model engine manufacturing facilities were relocated to premises at 15 Shakespeare Sarani Road in central Calcutta. Here they were co-located with another of the Kumar family’s businesses, the Astor Hotel. This must surely be the most up-market accommodation ever for a model engine manufacturing business! By this time, 20 individuals were employed in the engine manufacturing division.
The central location of the engine manufacturing facilities had significant advantages, being very close to the India's Hobby Centre sales outlet. The machine shop was located at the rear of the hotel. The engine testing room was effectively sound-proofed, but the smell of diesel exhaust fumes was a problem which required the use of a few exhaust fans working overtime to direct the fumes away from the hotel.
To augment its production capabilities, the company subsequently invested in an Automat lathe. This was never used in the manufacture of the Aurora Mills engines, which were produced throughout using the original equipment acquired in 1965 from Mills Brothers. Rather, it was utilised exclusively in the production of the other members of the K model engine range which began to appear in the early 1970’s. 
Oddly enough, the new machine’s efficiency was its downfall – it proved to be capable of producing work at a rate which far exceeded the demand for its services! As a result, it kept on getting well ahead of the other production processes, hence sitting idle for significant periods of time. It was soon put to work fulfilling outsource contracts in order to pay for the investment which it represented.
 For some years up to the early 1970’s the Aurora model engine range continued to include the K75 and K1.3 Mills models as well as a relatively small number of Taplin Twins. The company was also still marketing the A-M engines at this stage. However, in the early 1970’s the company began to develop its own original designs to replace the A-M range, the supply of which was drying up by that time. Aurora actually felt that they could improve upon the A-M designs in some respects. Their earliest designs featured steel cylinders having integrally-formed cooling fins, but later a separate alloy jacket was used instead.
All dies and tooling used in the manufacture of these engines were created in India by the Aurora company. They did consult Dennis Allen regarding their use of certain features of his designs, but this permission was freely granted. The engines were offered in 1.5 cc, 2.5 cc and 3.5 cc displacements, being identified respectively as the K150, K250 and K350 models. In 1975 Dennis Allen actually visited the company’s Calcutta premises as their guest, making a number of valuable suggestions for improvements.
In the early 1980’s a further step forward took place with the introduction of the K250 and K350 models in ball-race form. Both twin ball-race and single (inboard) ball race versions were made available. These engines were quite recognizably based upon the old FROG 249 BB, which had been one of the more popular British engines in India. They were very successful, continuing in production for many years with a few changes along the way. I have personally used a modified example of the "middle" variant of the 2.5 cc version with great success.
Also in the early 1980's the day-to-day running of the company was transferred to Mr. Suresh Kumar's elder son Mr. Ravi Kumar, a trained engineer by profession. This situation was to remain in effect until the late 1990's, when Ravi Kumar's younger brother Mr. Rishi Kumar took over the reins, which he still holds today (2017).
 The plain bearing K150, K250 and K350 models remained in production at this time, later being joined by a 2 cc model called the K200. At some point in time during the early to mid 1980's the former solid cylinders with integral cooling fins were replaced with unfinned cylinder liners secured by light alloy cooling jackets. This reduced weight significantly, although the K rotary valve engines were all still relatively heavy for their displacements.
The alloy cooling jackets at this stage were patterned along the lines of those used earlier in engines such as the Davies-Charlton Rapier 2.5 cc model. That is, the upper portion of the crankcase was externally threaded to accommodate an internal thread on the cooling jacket below the exhaust apertures. The jacket was a slip fit over the upper cylinder, which was of course left unthreaded.
As can readily be seen in the above image extracted from Mike Clanford's well-known 1987 “Pictorial A-Z of Vintage and Classic Model Airplane Engines”, the crankcases of the ball-bearing engines were clearly patterned on the old FROG 249 BB.  By  contrast, the contemporary plain bearing versions of these engines bore a very strong resemblance to the former A-M models. Hopefully the attached image at the right (also extracted from Clanford's book) will clarify this point.
At this juncture, it’s necessary to correct a piece of misinformation which appears on page 103 of Clanford’s interesting but often unreliable “A-Z" compilation. Beneath a photo of a purported Aurora K350 (which is actually a mid-'70's Sharma 2.5 cc model from Jodhpur, India), Clanford makes the comment “So that’s where all the old FROG tooling went!”. The Kumar family wishes to set the record straight – they never at any time bought any dies or tooling from either Dennis Allen or A. A. Hales, owners of the FROG range. They simply utilized certain elements of the A-M design for the plain bearing models (with Dennis Allen’s permission) and drew upon the FROG 249 layout for the ball-race models, making a number of their own design changes in both instances and producing their own dies and tooling.
Logged
 

Read
« Reply #3 on: December 12, 2017, 11:48:03 AM »
gaurang.1972
Plane Lover
Forum Hero
*****

Reputation Power: 13 
gaurang.1972 has no influence.
Offline Offline

City: Ahmedabad
State: Gujarat
RC Skills: Intermediate
Posts: 659
Join Date: Dec, 2012



In the mid 1980’s, Mick Wilshire of Super Tigre Engines UK,  who was Aurora’s British distributor at the time, suggested that the company release bored-out versions of the Mills engines in a range of different displacements. This suggestion initially led to the introduction of 1 cc and 1.5 cc versions of the company’s two Mills models. In the late 1980’s, Aurora began to experiment with even larger renditions of the basic Mills design. This resulted in the production of a relatively small number of Mills-based engines in displacements ranging up to as high as 6 cc.
The illustrated example of the 5 cc model may be taken as typical of these supersized Mills units. This one was loaned to me by my valued frend Derek Butler of Queensland, Australia, to whom my very sincere thanks are extended. The engine has a black-painted crankcase which accommodates a twin ball-race crankshaft and an R/C throttle. Despite being a little roughly made in spots and having only "fair" compression, the engine starts and runs very well indeed, although the throttle function leaves something to be desired.  A full test of this very rare unit, of which only around 50 were apparently made, will follow on this site in due course.
There were also a very few examples of a mini-Mills unit having a displacement of 0.375 cc. I'm indebted to my good mate Maris Dislers for drawing my attention to this engine. He obtained his example from fellow Aussie Don Howie, who had been unable to extract sufficient power from it to fly a model. Maris did a little tinkering and was eventually able to extract some 0.014 BHP @ 7,000 RPM from it. However, he reports that the engine suffered from a few manufacturing defects as well as being lumbered with an excessively long con-rod. It appears that very few of these mini-Mills motors were produced.
 Also in the late 1980's, the style of cooling jacket used on the rotary valve models was changed again. The cylinders were now threaded directly into the upper crankcases, while the alloy cooling jackets were threaded onto the upper cylinders rather than onto the crankcases. This assembly resulted in improved heat transfer between the cylinder and cooling jacket due to the intimate contact provided by the threads.
The resulting engines were noticeably neater in appearance as a result of this change. The attached image of a K250 BB having this style of cooling jacket typifies this arrangement. As can be seen, this is a very handsome engine indeed!  It is this variant which has given me a great deal of good service in modified form. 
Although the model engine range was continuing to develop very nicely while the kit manufacturing business was also flourishing, there were signs of trouble on the horizon. Indeed, the 1970 move to Shakespeare Sarani Road proved to be not entirely successful in the long run. This was largely due to the fact that that there was considerable labour unrest in the neighbourhood, driven in large part by the prevailing political climate. Problems encountered included a period during which Aurora employees were prevented from entering their workplace for a whole month. There was also an incident involving arson ………
Suffice it to say that these and other issues eventually forced Aurora to abandon the Shakespeare Sarani Road location in 1990 and move their engine manufacturing back to Foreshore Road. At this point, the model engine manufacturing workforce was down to only 10 individuals. The Astor Hotel on Shakespeare Sarani Road was finally sold off by the Kumar family in 1999. 
Latter-Day Developments
 After the move back to Foreshore Road in 1990, development of the model engine range continued. In 1996 the company’s Mills models began to receive black paint finishes on their crankcases, giving them the superficial appearance of being far more authentic reproductions of the original Mills engines from Woking. The castings continued to be formed from aluminium alloy, which in many ways is a superior material to the magnesium alloy of the original Mills engines given the incorrigible tendency of magnesium alloy towards corrosion.
The previously-mentioned K250 and K350 twin ball-race engines had used ball bearings having relatively large outside diameters, exactly like the old FROG 249 BB on which they were based. In 1996 smaller-diameter ball bearings became more generally available in India. This allowed the company to re-design their twin ball-race engines to have far slimmer noses as well as lugs of increasing thickness. The contour and number of the cooling fins on the screw-on cylinder jackets were also changed. The resulting engines were very smooth and dependable runners.
Logged
 

Read
« Reply #4 on: December 12, 2017, 11:49:05 AM »
gaurang.1972
Plane Lover
Forum Hero
*****

Reputation Power: 13 
gaurang.1972 has no influence.
Offline Offline

City: Ahmedabad
State: Gujarat
RC Skills: Intermediate
Posts: 659
Join Date: Dec, 2012



The plain bearing 2.5 cc models were discontinued in 1996. The majority of customers wanted the extra performance of the twin ball-race models, so this made complete sense. Mr. Suresh Kumar told his son Rishi that the plain-bearing engines had been aimed at young fliers who could afford to buy a kit but not a relatively high-priced engine to go with it. Those customers didn't care that their "budget" engines produced 800 RPM less than the more expensive ball-race models - they just wanted to fly and have fun! However, such customers had dwindled in numbers by the mid 1990's.
Aurora also produced several diesel conversion kits in the early 1990's for O.S. and Super Tigre .40 and .60 glow-plug models. These were commissioned by John Maloney of World Engines. This inspired Ron Irvine to produce a diesel conversion of his Irvine 40 glow-plug model. The diesel conversion engines with their Schnuerle porting sounded great, and were able to swing a larger prop than their glow-plug counterparts. 
In 1997, an R/C carburettor was developed for the Aurora K75 and K1.3 Mills models. This was based upon the throttle unit on an original Mills .75 in Aurora’s possession. Around 500 of these throttle units were exported over the following years. Doubtless some of these were retro-fitted to original Mills engines.
Sadly, the move back to Foreshore Road did not resolve the labour issues which had forced the company to abandon their Shakespeare Sarani Road location. On the contrary, the Shalimar area and Foreshore Road also constituted a sensitive labour pocket, as they continue to do to this day (2017). The area used to be famous for its jute mills, but 90% of these are now closed due to labour problems. Aurora got around these issues to some degree by buying additional lathes which were installed in their employees’ homes so that they could work at home on an outsource basis. This avoided the daily commute as well as any access issues.
 While all this was going on in Calcutta, events had been unfolding in other parts of the world. It will be recalled that in 1965 Mr. Suresh Kumar (on behalf of his Aurora company) had acquired the outright and exclusive title to the Mills name, worldwide manufacturing rights, designs, original master drawings, production tooling, die-casting equipment and residual component stocks.
Beginning in 1972, a number of Mills replicas began to appear from other makers in a number of countries. The late David Owen and I have covered the story of the Mills replicas in a separate article on this website. Suffice it to say that the majority of these cases involved very limited production of the engines concerned, in some cases (as with the original Doonside Mills models) being distributed by subscription rather than through retail sales on the open market. Moreover, they were targeted at a different market from the Aurora models.
Even so, with one exception none of the makers involved approached Aurora to seek authorization for the use of the Mills name and designs. The sole exception was Irvine Engines of London, England, who  produced a series of Mills replicas during the 1990’s. These engines were built to Irvine’s usual very high standards in both .75 and 1.3 cc sizes. Aurorawas approached by Ron Irvine to secure permission to produce these units – the only replica manufacturer to do so. This approach resulted in a verbal agreement between Ron Irvine and Aurora, the terms being that Irvine Engines was given free rein to manufacture its Mills replicas without challenge from Aurora, while Aurora was designated as Irvine's Indian distributor and was supplied with engines at a discount price. Both parties thus benefited from this arrangement.
As far as the majority of the other replicas went, although they were undoubtedly infringing upon the exclusive rights held by Aurora in using the Mills name and designs, the company policy was to leave well alone since these limited-edition replicas posed no great threat to Aurora’s ongoing marketing efforts. Moreover, attacking them could well be harmful to Aurora's public relations image.
However, there was one notable exception! In 2007 Dave “Boddo” Boddington of England contracted with the CS company of Shanghai, China for the production of a series of engines which were very directly based upon the designs of the Mills .75 and 1.3 models to which Mr. Kumar held the exclusive rights. These were marketed worldwide from England by Dave under the designation “Boddo Mills” units. Hence they were utilizing both the Mills name and the Mills designs.
 This was a very different situation from that presented by the other unauthorised replicas - the CS products represented very stiff direct competition since they were being offered in quantity on the open market in the same price category. This prompted the Aurora company to bring an immediate legal action against Dave requiring him to cease selling these replica Mills models.
In 2008, when this action was initiated, Aurora began by offering Boddo the opportunity to acquire the original Mills assets held by Aurora. This would have allowed him to continue to have the engines manufactured by CS and to market them worldwide. However, Dave had then recently been diagnosed with the cancer that was sadly to claim him in 2010, hence declining this offer. Accordingly, the legal action proceeded. The final settlement of the case allowed Dave to sell off his remaining stocks (with payment of a royalty to Aurora for the engines sold) but required him to refrain from ordering any more.
This naturally left CS without a bulk customer for the engines! Undeterred, they carried right on making their CS Mills replicas, marketing them directly worldwide through their on-line store. Given the attention paid to Dave Boddington by Aurora, it's scarcely surprising that their next target was CS. In fact, that company had been selling Mills replicas on their own account since 2007, calling them "Miller" engines in an attempt to get around any name infringement issues. This of course fooled nobody, least of all Aurora, who pursued CS for infringement of their rights to the use of the Mills name and designs.
Logged
 

Read
« Reply #5 on: December 12, 2017, 12:00:50 PM »
gaurang.1972
Plane Lover
Forum Hero
*****

Reputation Power: 13 
gaurang.1972 has no influence.
Offline Offline

City: Ahmedabad
State: Gujarat
RC Skills: Intermediate
Posts: 659
Join Date: Dec, 2012



The outcome of this matter was that CS dropped all mention of the Mills (or Miller) name in connection with these engines. However, they continued to market them under the NAVO trade-name right up to the point in late 2015 at which they finally abandoned the model engine field. Once again, no-one was deceived - one look was all that was required to establish the NAVO models' credentials as Mills replicas! Indeed, by this time the look was so universally familiar that the name was effectively superfluous!
It's probably worth mentioning another analagous situation with which Aurora was faced in 2009. In that year, an individual from Calcutta who shall remain nameless made a few appearances on the Internet trying to generate some interest in what he described as his own brand of PICO model diesel engines. These included a Mills .75 replica as well as a similar 1 cc model. Rishi Kumar has confirmed that the individual concerned was an acquaintance of his who had been buying Aurora engines in lots, repackaging them and selling them under his own name, most notably in New Zealand. Aurora took action to put an end to this, after which no more was heard of the PICO venture. 
Another proposal which did not get off the ground was an inquiry relating to the possibility of Aurora making a series of replicas of the David-Andersen engines from Norway. It seems that Aurora was approached in the early 1990's with a proposal that they should manufacture a run of 1000 examples of one of these models. The drawings for the model in question were provided - how these were obtained is anyone's guess! Apparently some correspondence was exchanged regarding this matter, but the proposal eventually came to nothing. 
End of the Road
Unfortunately, continuing changes in the worldwide model goods market resulted in a slow but steady erosion of Aurora’s model-related business. By 2003 the Foreshore Road premises had become far larger than required to house the model kit and engine manufacturing operations which still went on there. At that point, both activities were relocated yet again, this time back to the premises at 1A Russell Street above India’s Hobby Centre which had first been occupied by Aurora in 1958!  The wheel had come almost full circle!
By this time the workforce had shrunk to only 4 individuals in each of the model kit and model engine departments. Since they were no longer needed for model kit and engine production, the Foreshore Road premises were turned over to Rishi Kumar’s uncle, who converted them into a steel “godown” (warehouse). Apart from the fact that some of the machinery rooms have been turned into offices, the Foreshore Road premises remain largely intact today (2017).
 Throughout its entire existence, the Aurora venture had in effect been a “hobby” which was financed by company founder Mr. Suresh Kumar from his own personal resources. His son Rishi estimates that over the life of the company from its foundation in 1955 to his death in 2010, his father may have lost as much as US$50,000 of his own money in supporting the venture. However, he didn't care - his devotion to the hobby in general, and model engines in particular, allowed him to view this as simply the cost of participation in an activity which he loved.
Until his final days, Mr. Kumar retained his passionate interest in the model engines that clearly became his first love, providing his input to their design and construction throughout. Rishi Kumar tells us that his father continued to visit the Hobby Centre twice a week, often sitting in the engine department to watch and listen to the engines being tested prior to shipment. He was always ready to comment on such issues as performance, prop sizes, fuel mixtures, case hardening problems, proposals for Schnuerle porting of the 250/350 diesels, etc.  A true enthusiast right to the end!
Sadly, Mr. Kumar passed away in 2010 at the age of 88. The loss of his energy, enthusiasm and support was a major blow to the Aurora company from which it never really recovered. In September 2013, the engine department at the Russell Street location was finally closed. The fundamental reason for this was a lack of suitably qualified and experienced machinists and fitters. The “golden hands” had all officially retired by 2005, having worked on until they could do so no more. It turned out to be impossible to replace them.
Company records show that the total number of Mills .75 and 1.3 replicas exported over the years was approximately 33,000. In addition, some 1,500 examples were sold in India. The total of almost 35,000 Mills engines represents close to 40% of the total number of original Mills engines manufactured at Woking. 
At the time of writing (early 2017) the kit division still survived with 3 employees. The company was still making the Mercury and MAP kits, as they had been doing for almost 60 years. They also made kits for a number of indigenous designs. Many types of kits had been discontinued like C/L aerobatics, C/L speed, F/F for Mills .75, large towline gliders, Open power ratio F/F, Scale concours F/F and large Wakefield type rubber models. However, Aurora remained able to supply any kit to order, since all the templates and plans were still on hand. A few of their F/F kits are now generally flown as electric E-flight models with 2-4 channel R/C. The Tomboy, Magna, Matador, Martin and Tiger Moth are examples.
Also at the time of writing in April 2017, the Aurora company was continuing to offer its entire Mills and Taplin Twin holdings for sale. These assets included name rights, design rights, remaining parts, dies, jigs and tooling, along with a one-week training session in their use. It was the Kumar family's sincere hope that these assets could return to their native England, although they were open to offers from any location worldwide. If any reader is sincerely interested in exploring the acquisition of these assets, I'll be glad to put you in direct contact. You can always contact me through the Aurora thread on my blog site.
Conclusion
I hope that the above article will have demonstrated that Aurora was (and is) a very sincere company which was founded by a genuine enthusiast, Mr. Suresh Kumar, and has been operated by the Kumar family for over 60 years at the time of writing (2017)  with the goal of providing a valuable service to the worldwide modelling community. Although now considerably diminished as a result of changing market conditions, the fact that the company remains in operation over 60 years after its establishment is a testament to the dedication and success with which its founder pursued his goals. This is a venture which deserves the respect of all of us who value sincere efforts to support our chosen hobby.
_________________________
Article © Adrian C. Duncan, Coquitlam, British Columbia, Canada
First published May 2017
Logged
 

Read
« Reply #6 on: December 12, 2017, 12:25:04 PM »
gaurang.1972
Plane Lover
Forum Hero
*****

Reputation Power: 13 
gaurang.1972 has no influence.
Offline Offline

City: Ahmedabad
State: Gujarat
RC Skills: Intermediate
Posts: 659
Join Date: Dec, 2012



file

AU-02B.jpg
Re: aurora model engines (india)
* AU-02B.jpg (93.68 KB, 613x800 - viewed 1489 times.)
This post has 1 more images(s)/attachment(s). Please login or register to view them.
Logged
 

Read
« Reply #7 on: December 12, 2017, 12:26:53 PM »
gaurang.1972
Plane Lover
Forum Hero
*****

Reputation Power: 13 
gaurang.1972 has no influence.
Offline Offline

City: Ahmedabad
State: Gujarat
RC Skills: Intermediate
Posts: 659
Join Date: Dec, 2012



more pics

AU-05.jpg
Re: aurora model engines (india)
* AU-05.jpg (66.78 KB, 800x678 - viewed 1301 times.)
This post has 1 more images(s)/attachment(s). Please login or register to view them.
Logged
 

Read
« Reply #8 on: December 12, 2017, 12:31:50 PM »
gaurang.1972
Plane Lover
Forum Hero
*****

Reputation Power: 13 
gaurang.1972 has no influence.
Offline Offline

City: Ahmedabad
State: Gujarat
RC Skills: Intermediate
Posts: 659
Join Date: Dec, 2012



more

AU-11.jpg
Re: aurora model engines (india)
* AU-11.jpg (65.38 KB, 800x674 - viewed 1238 times.)
This post has 2 more images(s)/attachment(s). Please login or register to view them.
Logged
 

Read
« Reply #9 on: December 12, 2017, 01:14:43 PM »
rcrcnitesh
Plane Lover
Forum Hero

*****

Reputation Power: 22 
rcrcnitesh barely matters.rcrcnitesh barely matters.
Offline Offline

City: Chennai
State: Tamil Nadu
RC Skills: Beginner
Posts: 2154
Join Date: Jul, 2013



Loved reading this article. You should've posted the original link http://adriansmodelaeroengines.com/catalog/main.php?cat_id=135

Regards,
Nitesh
Logged

Maker | Aeromodeller | Teenager
 

Read
« Reply #10 on: December 12, 2017, 02:08:42 PM »
K K Iyer
Global Moderator
Forum Hero
*****

Reputation Power: 61 
K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!
Offline Offline

City: Indore
State: Madhya Pradesh
RC Skills: Intermediate
Posts: 5165
Join Date: Jan, 2012



http://www.rcindia.org/rc-people/rc-hall-of-fame/msg136167/#msg136167

Quote from my post of 13.4.2013 in the Hall of Fame thread   
Thanks guys.
First nominee is the late Mr Suresh Kumar of IHC, SMAE, Aurora Models, Mills/Frog/AM diesels.



And here's a photo of Rishi Kumar...

IMG_1073.jpg
Re: aurora model engines (india)
* IMG_1073.jpg (56.62 KB, 800x600 - viewed 1013 times.)
Logged
 

Read
« Reply #11 on: December 12, 2017, 06:13:07 PM »
sanjayrai55
Plane Lover
Forum Hero

*****

Reputation Power: 85 
sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.
Offline Offline

City: Gurgaon
State: Haryana
RC Skills: Intermediate
Posts: 8337
Join Date: Dec, 2011

Don't wake a Tiger until you've factored the teeth



Interesting read. Thanks Gaurang
Logged

 

Read
« Reply #12 on: December 13, 2017, 03:38:22 AM »
KALYANPRODHAN
Global Moderator
Forum Hero

*****

Reputation Power: 17 
KALYANPRODHAN has no influence.
Offline Offline

City: Kolkata
State: West Bengal
RC Skills: Intermediate
Posts: 1584
Join Date: Jul, 2010

Information sharing improves knowledge of both.



Interestingly read. But the aurora was tried to search out by me in the forshore road from 2003-2011, several times as my residance was just in opposite to river Ganga, and cannot search in the entire area. In contradictory, since 2000 to 2007, i was posted in park street (Metro Bhvan), hardly distance of 300 mts from IHC, but they not only overpriced, but also taking 3-10 times of the imported china models, which extinguished my hobby (and several other youngstars, like rohit and lot kolkata public), quite a bit, which again started after joining into this forum (truely speaking a open minded forum).
Now, coming into the business stratagy, I saw in my childhood, about the fun fly at Behala Aero drum, popularized by Doordarshan NEWS, and later several new private engineering college started, which may re-energize the hobby. While the students can afford the quadcoptor, they can make RC better (Electrical, Electronics, Mechanical). They are doing robotic war, they will do better with model engine tuning (Mechanical & Aero-Space). The engine may be flourished, only if the engine supply line, would be available, with the entry path as basic models are be available.
In my engineering college days from start to end(1995-2008), I was in search of a kolkata based engine (Not only for lesser cost, but for spare parts), but in vain. The inner hobby was kept alive by making models based on CG Calculation with stick and foam, Study of older books, Magazines from National Library etc. NCC 2 Bengal uses joypur based engines. (Sharma Diesel?). So, what sacrifice the Sr. kumar done, in his lifetime, Jr. kumar cannot even hold them at all, with modifying with time. The "man with golden arm" was not continued throughout the generations, even from iti students trainee...(Mainly fresh blood, among which, if 1 out of 100 trainee, would fall in love, it will be an asset for Aurora).

Look, being an kolkata boy, i cannot get the real support of the Sr. Kumar's effort, rather the offensive impulses from staff of IHC, which make distance from IHC, while we have time, young blood, enough time in hand, and no smartphone, no arduino,  little but self earned money,  And I am not the one... there are not only thousands but lakhs of youngstars of my age from kolkata...the failure story was of the time,when if proper strategy was followed, we can have Aurora BL Motors, ESCs, Tx/Rx and appx. 5000 engine sold/year only in kolkata, even after selling of electrics...

There were several possibility specially in kolkata, as the technicians of bengal goes on experimenting... even with engines...
Example: they makes irregular engine vehicles which used in villages, possibly higher than regular vehicles...

Every industry lives on it's marketing as well as quality of the product, and the production cost depends upon supporting industry, manpower, and market demand/production rate, which was not considered as per my experiences as an open customer (instead of an known person to kumar). Avoiding Open rate marketing by IHC, ruined the AURORA.....

But RCINDIA posts can have the basic start on the chapters to the hobbyist newcomers...and can ignite the pation VIGOROUSLY (reignited me)... really....And in no cost for knowledge........
« Last Edit: December 13, 2017, 09:00:16 AM by KALYANPRODHAN » Logged

We have to unite and to prove ourself to make indigenous products as well as marketing / Canvasing them. I'm sure we must achieve success if we try unitedly.
 

Read
« Reply #13 on: December 13, 2017, 06:06:21 AM »
sanjayrai55
Plane Lover
Forum Hero

*****

Reputation Power: 85 
sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.
Offline Offline

City: Gurgaon
State: Haryana
RC Skills: Intermediate
Posts: 8337
Join Date: Dec, 2011

Don't wake a Tiger until you've factored the teeth



"which was not considered as per my experiences as an open customer (instead of an known person to kumar)"
Kalyan, in my dealings with IHC Bombay and Delhi, I generally found the staff very supportive. Sometimes a bit snobbish (Actually! They thought this was some great secret they were imparting, and aeromodelling was an exclusive club. BTW some aeromodellers still behave like this!) but overall supportive. Never had to deal with Kumar himself, but I'm sure my experience would be echoed by many across the IHCs in India
Logged

 

Read
« Reply #14 on: December 13, 2017, 08:26:54 AM »
saikat
Plane Lover
Forum Hero
*****

Reputation Power: 14 
saikat has no influence.
Offline Offline

City: Tezpur
State: Tripura
RC Skills: Expert
Posts: 1130
Join Date: Jul, 2009



actually Kalyan does have a point....
India Hobby Centre staff were snobbish , with a " take it or leave it kind of attitude " which put off many youngsters

the internet and online ordering were the saviours

However - I have many fond memories of the place - I used to spend the whole year planning what to buy during my families annnual
trips to Kolkata. I remember they used to hand out a cyclostyled pricelist.
Logged

 

Read
« Reply #15 on: December 13, 2017, 08:29:53 AM »
Aeroresurrect
Plane Lover
Senior Member
***

Reputation Power: 3 
Aeroresurrect has no influence.
Offline Offline

City: Noida
State: Uttar Pradesh
RC Skills: Beginner
Posts: 134
Join Date: Jun, 2012



In the above article(s) posted, I found no mention of the diesel (by the name K-100) which were sold by IHC at Kolkata. These were advertised in the "Illustrated Weekly" (a national magazine) in the late 60s and early 70s.
My initial interest in Aeromodelling began in 1970 at which time I bought an "Aurora Tomboy" which cost me Rs 64/- including shipping (a princely amount at that time) and later in 1972 a K-150. (maybe for Rs 100/- as far as I remember). However, could not make it fly and resulted in devastating crashes ! Also engine fuel was an issue...
I was quite passionate about this hobby which I had to let go because of finances (pocket-allowance) and pursuing my academic career.
But yes, the staff were so, so supportive at IHC Kolkata when I visited them in the early 70s (including a smart sales-girl) were nowhere near the rough guys I encountered at IHC during my (one) visit in 2005....
A very, very interesting article and many consider Kumars as the founder and pioneer of aeromodelling in the Indian scene !
Logged
 

Read
« Reply #16 on: January 25, 2018, 05:12:12 PM »
flyingboxcar
Plane Lover
Forum Hero
*****

Reputation Power: 22 
flyingboxcar barely matters.flyingboxcar barely matters.
Offline Offline

City: Chennai
State: Tamil Nadu
RC Skills: Intermediate
Posts: 1768
Join Date: Apr, 2009



I guess it all depends on who you were dealing with.
Late Mr Kumar was known to give away models at Behala just to encourage people. My first interaction with the Kumar's was when I marched in to Mr Ravi's cabin and announced I want to learn aero modelling. He gave a smile and offered me seat, glass of cold water (very welcome on that hot summer day of 1988) and told me that they did not teach they sold aeromodels. After a brief conversation, I left his office with few old magazines and while on the way out did pick up a Yellow bird kit, an Me 109 chuck catapult and the Chaser rubber powered one. Ohh! I still remember the smell of the wood and paint on those.
Later befriended Rishi and have remained good friends ever since, and all credit to him for keeping my hobby and interest alive.   
Logged

If you are really into scale you should be here. www.rcscalebuilder.com
 

Read
« Reply #17 on: January 25, 2018, 06:12:51 PM »
sanjayrai55
Plane Lover
Forum Hero

*****

Reputation Power: 85 
sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.
Offline Offline

City: Gurgaon
State: Haryana
RC Skills: Intermediate
Posts: 8337
Join Date: Dec, 2011

Don't wake a Tiger until you've factored the teeth



....and then it all began  Grin
Logged

 

Read
« Reply #18 on: January 25, 2018, 11:59:32 PM »
flyingboxcar
Plane Lover
Forum Hero
*****

Reputation Power: 22 
flyingboxcar barely matters.flyingboxcar barely matters.
Offline Offline

City: Chennai
State: Tamil Nadu
RC Skills: Intermediate
Posts: 1768
Join Date: Apr, 2009





http://www.rcindia.org/rc-people/rc-hall-of-fame/msg136167/#msg136167


Quote from my post of 13.4.2013 in the Hall of Fame thread   
Thanks guys.
First nominee is the late Mr Suresh Kumar of IHC, SMAE, Aurora Models, Mills/Frog/AM diesels.



And here's a photo of Rishi Kumar...

In that picture it's not Rishi Kumar. And believe me I have that from the horse's mouth. 😊
Logged

If you are really into scale you should be here. www.rcscalebuilder.com
 

Read
« Reply #19 on: January 26, 2018, 12:20:18 AM »
K K Iyer
Global Moderator
Forum Hero
*****

Reputation Power: 61 
K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!
Offline Offline

City: Indore
State: Madhya Pradesh
RC Skills: Intermediate
Posts: 5165
Join Date: Jan, 2012



Oops! All these years I thought it was...
Will check the cover photo caption when I'm back home next month.
Logged
 

Pages: [1]   Go Up
Jump to:  

Related Topics
Subject Started by Replies Views Last post
Aurora Kits/ Mills engines/ India Hobby Centre / Rishi Kumar « 1 2  All »
RC Outlets and Resellers
b4ggu 40 50915 Last post September 20, 2019, 12:27:05 AM
by gaurang.1972
Model Steam engines
Fuel and Engines
speedracer 2 4536 Last post May 10, 2013, 11:16:45 AM
by pline
FOR SALE 2.5cc Aurora Mills Diesel aero engines
For Sale
pline 1 3123 Last post July 25, 2023, 08:57:05 PM
by Pradeeppk
Aurora Model Mfg Co
RC Outlets and Resellers
K K Iyer 2 1891 Last post July 14, 2020, 10:30:17 AM
by shirsa2001
Aurora Models India Hobby Center
Kites, Trains, Free Flight and All Others
Free Flight 1 3126 Last post March 01, 2022, 04:03:45 PM
by K K Iyer