RC India
Welcome Guest, please login or register.
 
Pages: [1] 2 3 ... 16   Go Down
0 Members and 3 Guests are viewing this topic. Topic Tools Topic Tools 
Read
« on: May 28, 2011, 06:45:00 PM »
flyingboxcar
Plane Lover
Forum Hero
*****

Reputation Power: 22 
flyingboxcar barely matters.flyingboxcar barely matters.
Offline Offline

City: Chennai
State: Tamil Nadu
RC Skills: Intermediate
Posts: 1768
Join Date: Apr, 2009




I had been thinnking of this for some time. Wanted to document all my engines and what better place to preserve them for posterity than the RC forum.
Over a period of time I would slowly post all the engines I have or may acquire later.
Hope this would help in converting some of the electric flyer to wet fuel engines as well

So here is the largest capacity engine I have. 

1. The plain box hides a gem of an engine. The engine is considered to be must have for most of the precision scale and 1000 hrs job models where you can not afford to have the engine fail mid air
2. Its a Laser 150 four stroke manufactured in UK. The engine is not known to be a powerhouse but for reliability. In fact the mfrs themselves recommend putting a 150 where a normal 120 would be required.
3. The box on opening
4. The engine as it comes out of box. Muffler and carb are not yet attached

Engine Series 1 001.jpg
Engines, Engines and more Engines...!!!
* Engine Series 1 001.jpg (32.13 KB, 640x480 - viewed 2363 times.)
This post has 3 more images(s)/attachment(s). Please login or register to view them.
Logged

If you are really into scale you should be here. www.rcscalebuilder.com
 

Read
« Reply #1 on: May 28, 2011, 06:46:40 PM »
flyingboxcar
Plane Lover
Forum Hero
*****

Reputation Power: 22 
flyingboxcar barely matters.flyingboxcar barely matters.
Offline Offline

City: Chennai
State: Tamil Nadu
RC Skills: Intermediate
Posts: 1768
Join Date: Apr, 2009



5. The carb, the shiny steel part goes in to the engine carb manifold. You would see that the fuel charge has to travel a very short distance and straight to the induction port
6. The muffler. The part with"o" rings goes into exhaust manifold. Advantage of this muffler being that you ca rotate it and fit it at any angle you need to. Same with the carb as well
7. The engine rear view. Push rods, rockers are all at the rear to protect in case of that unforeseen circumstances. This is same design philosphy as Enya of today and OS 4T of early years. You can also see the manifolds for carb and muffler, the carb goes on the left and muffler to the right (as lookedfrom rear). You can also see the crankcase breather at the bottom of the crankcase       
8. The engine right view

Engine Series 1 005.jpg
Re: Engines, Engines and more Engines...!!!
* Engine Series 1 005.jpg (60.87 KB, 640x480 - viewed 2322 times.)
This post has 3 more images(s)/attachment(s). Please login or register to view them.
Logged

If you are really into scale you should be here. www.rcscalebuilder.com
 

Read
« Reply #2 on: May 28, 2011, 06:49:40 PM »
flyingboxcar
Plane Lover
Forum Hero
*****

Reputation Power: 22 
flyingboxcar barely matters.flyingboxcar barely matters.
Offline Offline

City: Chennai
State: Tamil Nadu
RC Skills: Intermediate
Posts: 1768
Join Date: Apr, 2009



9. Front view.
10. Top view. The plug is staright up unlike the enya which are angled to the front making use of a removable booster impossible. Here one can easily use it but has to be careful.
11. Clsoe up of the crank. You would notice that the entire engine with the exception of carb and muffler are machined from bar stock and not cast. Quality is evident everywhere. All metal joints are sealed with silicone gaskets and the engine inspires confidence
12.  The supplied instructions

Engine Series 1 009.jpg
Re: Engines, Engines and more Engines...!!!
* Engine Series 1 009.jpg (37.34 KB, 640x480 - viewed 1694 times.)
This post has 3 more images(s)/attachment(s). Please login or register to view them.
Logged

If you are really into scale you should be here. www.rcscalebuilder.com
 

Read
« Reply #3 on: May 28, 2011, 06:55:48 PM »
flyingboxcar
Plane Lover
Forum Hero
*****

Reputation Power: 22 
flyingboxcar barely matters.flyingboxcar barely matters.
Offline Offline

City: Chennai
State: Tamil Nadu
RC Skills: Intermediate
Posts: 1768
Join Date: Apr, 2009



13. This portion shows that the mfrs recommend 15% oil content and very clealry say that no nitro is required, however if one wishes to max recomendation is 12.5%. Alsoif you notice for gen lubrication and preservation the recommendation is to use SAE 30 or 2T oil. Now that would be easy andeconomical than the prorietary after run oils
14. Prop and fuel tank size recommendations   

Engine Series 1 013.jpg
Re: Engines, Engines and more Engines...!!!
* Engine Series 1 013.jpg (45.49 KB, 800x450 - viewed 1716 times.)
This post has 1 more images(s)/attachment(s). Please login or register to view them.
Logged

If you are really into scale you should be here. www.rcscalebuilder.com
 

Read
« Reply #4 on: May 28, 2011, 07:03:11 PM »
avijit17basu
Plane Lover
Senior Member
***

Reputation Power: 3 
avijit17basu has no influence.
Offline Offline

City: CHENNAI
State: Tamil Nadu
RC Skills: Beginner
Posts: 214
Join Date: Mar, 2009



Make this a sticky topic and others should also post interesting engines
waiting for the next engine in this series Capt. Maybe details of your RCV engine which is a totally different concept.
 does anyone have an OS wankel?
regards
Avijit
Logged
 

Read
« Reply #5 on: May 28, 2011, 07:04:52 PM »
flyingboxcar
Plane Lover
Forum Hero
*****

Reputation Power: 22 
flyingboxcar barely matters.flyingboxcar barely matters.
Offline Offline

City: Chennai
State: Tamil Nadu
RC Skills: Intermediate
Posts: 1768
Join Date: Apr, 2009



Doc,
I would prefer that if some others have interesting engines a seperate thread is started. And BTW mythread would not be limited to interesting engines alone but would cover whatever engines I have from exotic to mundane
   
Logged

If you are really into scale you should be here. www.rcscalebuilder.com
 

Read
« Reply #6 on: May 28, 2011, 07:07:54 PM »
flyingboxcar
Plane Lover
Forum Hero
*****

Reputation Power: 22 
flyingboxcar barely matters.flyingboxcar barely matters.
Offline Offline

City: Chennai
State: Tamil Nadu
RC Skills: Intermediate
Posts: 1768
Join Date: Apr, 2009



Next in line, again from UK and a very good pedigree. But not a glow this time a diesel. Many of you may recognise the form. Yes it looks very much like our own sharma diesel (actually sharma diesels resemble these). Yes if you guessed it to be a PAW it is indeed a PAW. And I have twp of these. Intend to put them in a small control line DC 3 which I have been working on with help of some other modellers  
1. The boxes, they do come in slightly more colorful boxes than the Laser. A bright yellow (you cant miss this in your cupboard)
2. The mfrs details
3. Engine details. Mine is a 1.5 cc TBR (twin ball raced/twin ball bearings) Paw has many varities within the same displacement, but for my intended purpose these would be sufficient
4. On opening the box the engine and needle are neatly packed in poly bag and sorrounded with tissue paper padding

Engine Series 1 015.jpg
Re: Engines, Engines and more Engines...!!!
* Engine Series 1 015.jpg (76.99 KB, 800x450 - viewed 1648 times.)
This post has 3 more images(s)/attachment(s). Please login or register to view them.
Logged

If you are really into scale you should be here. www.rcscalebuilder.com
 

Read
« Reply #7 on: May 28, 2011, 07:11:57 PM »
vivek.sharma
Plane Lover
Active Member
**

Reputation Power: 1 
vivek.sharma has no influence.
Offline Offline

City: jodhpur
State: Rajasthan
RC Skills: Advanced
Posts: 41
Join Date: Feb, 2011



Manish Sir,

It really looks a CHARMER.

On which model you will be using this?

Regards,
Vivek
Logged
 

Read
« Reply #8 on: May 28, 2011, 07:14:38 PM »
flyingboxcar
Plane Lover
Forum Hero
*****

Reputation Power: 22 
flyingboxcar barely matters.flyingboxcar barely matters.
Offline Offline

City: Chennai
State: Tamil Nadu
RC Skills: Intermediate
Posts: 1768
Join Date: Apr, 2009



Vivek sir, I plan to put these on a CL DC 3

I am having issues attaching the pics hence going to post them one or two at a time
5. Engines port side
6. Starboard side

Engine Series 1 023.jpg
Re: Engines, Engines and more Engines...!!!
* Engine Series 1 023.jpg (64.49 KB, 800x450 - viewed 1209 times.)
This post has 1 more images(s)/attachment(s). Please login or register to view them.
Logged

If you are really into scale you should be here. www.rcscalebuilder.com
 

Read
« Reply #9 on: May 28, 2011, 07:15:28 PM »
vivek.sharma
Plane Lover
Active Member
**

Reputation Power: 1 
vivek.sharma has no influence.
Offline Offline

City: jodhpur
State: Rajasthan
RC Skills: Advanced
Posts: 41
Join Date: Feb, 2011



Sir that 4 stroke 150?
Logged
 

Read
« Reply #10 on: May 28, 2011, 07:19:01 PM »
flyingboxcar
Plane Lover
Forum Hero
*****

Reputation Power: 22 
flyingboxcar barely matters.flyingboxcar barely matters.
Offline Offline

City: Chennai
State: Tamil Nadu
RC Skills: Intermediate
Posts: 1768
Join Date: Apr, 2009



oh!! That one is going to go in a 1/4 Tiger Moth
This time top and rear view

Engine Series 1 026.jpg
Re: Engines, Engines and more Engines...!!!
* Engine Series 1 026.jpg (68.11 KB, 800x450 - viewed 1121 times.)
This post has 1 more images(s)/attachment(s). Please login or register to view them.
Logged

If you are really into scale you should be here. www.rcscalebuilder.com
 

Read
« Reply #11 on: May 28, 2011, 07:33:42 PM »
flyingboxcar
Plane Lover
Forum Hero
*****

Reputation Power: 22 
flyingboxcar barely matters.flyingboxcar barely matters.
Offline Offline

City: Chennai
State: Tamil Nadu
RC Skills: Intermediate
Posts: 1768
Join Date: Apr, 2009



From the continent. A glow. Not only out of production but the company recently shut down as they could not compete with cheap chinese imports. The lineage is again superb, known for quality and craftmanship like any other German machinery, a WEBRA Speed 90. The engine is NIB and interesting feature of this engine is that it has a sliding carb rather than rotating barrel. Called Dynamix carb. Have read mixed reviews about the carb, will come to own conclusions when I finally get to run this one
 

Engine Series 1 072.jpg
Re: Engines, Engines and more Engines...!!!
* Engine Series 1 072.jpg (68.09 KB, 800x450 - viewed 1228 times.)
This post has 3 more images(s)/attachment(s). Please login or register to view them.
Logged

If you are really into scale you should be here. www.rcscalebuilder.com
 

Read
« Reply #12 on: May 28, 2011, 07:38:52 PM »
flyingboxcar
Plane Lover
Forum Hero
*****

Reputation Power: 22 
flyingboxcar barely matters.flyingboxcar barely matters.
Offline Offline

City: Chennai
State: Tamil Nadu
RC Skills: Intermediate
Posts: 1768
Join Date: Apr, 2009



If you noticed there are no holes for mounting a muffler. So this will either have to have a strap on or holes would have to be drilled and tapped to take on a muffler. Should not be a problem as there is enough material around  

Engine Series 1 077.jpg
Re: Engines, Engines and more Engines...!!!
* Engine Series 1 077.jpg (59.33 KB, 800x450 - viewed 1162 times.)
This post has 3 more images(s)/attachment(s). Please login or register to view them.
Logged

If you are really into scale you should be here. www.rcscalebuilder.com
 

Read
« Reply #13 on: May 28, 2011, 08:13:15 PM »
ujjwaana
Plane Lover
Forum Hero

*****

Reputation Power: 28 
ujjwaana barely matters.ujjwaana barely matters.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Intermediate
Posts: 2384
Join Date: Oct, 2009



Offff!!! The Laser has smitten  me so bad that I cannot concentrate to the IPL Finale'! Thats not fair Capt!
Logged

Futaba 8FG Super | HK-450v2 | FA-22 Raptor |AXN Floater-Jet | FunJet | Black Horse Edge 540 | Amp Master 015 | 2.3M Big Brother
 

Read
« Reply #14 on: May 28, 2011, 09:54:54 PM »
AEROVISHWA
Its Your LIFE... Make it LARGE.....
Plane Lover
Forum Hero

*****

Reputation Power: 16 
AEROVISHWA has no influence.
Offline Offline

City: belgaum
State: Karnataka
RC Skills: Intermediate
Posts: 1320
Join Date: Feb, 2011

IN THRUST WE TRUST.....!!



thats a awsome collection...!!!  Clap Clap Salute Salute Salute
Logged

Aerodynamics are for people who can't build engines.
-Enzo Ferrari

https://sites.google.com/site/vishveshkakkeri93/
HAPPY LANDINGS
 

Read
« Reply #15 on: May 29, 2011, 12:20:44 AM »
Akshayb
Plane Lover
Forum Veteran

****

Reputation Power: 5 
Akshayb has no influence.
Offline Offline

State: Karnataka
RC Skills: Beginner
Posts: 386
Join Date: Dec, 2010



Nice collection, Love English. but Russians are missing ?
Logged
 

Read
« Reply #16 on: May 29, 2011, 12:47:42 AM »
flyingboxcar
Plane Lover
Forum Hero
*****

Reputation Power: 22 
flyingboxcar barely matters.flyingboxcar barely matters.
Offline Offline

City: Chennai
State: Tamil Nadu
RC Skills: Intermediate
Posts: 1768
Join Date: Apr, 2009



I am taking pictures and posting them here in the order the engines are stored in the cupboard.
Two of the Russians are out waiting to be photographed. So hold on to your horses and all would be revealed. Giggle
Pssst.... in case you did not know it is said that Ukrainians are better than Russians or Brits Wink

@Ujjw
The Laser resembles a pot bellied middle aged man. And is as dependable as such a man could be, neither fast and furious rocket , nor a slouch.Steady and dependable!!!
Logged

If you are really into scale you should be here. www.rcscalebuilder.com
 

Read
« Reply #17 on: May 29, 2011, 12:54:05 AM »
flyingboxcar
Plane Lover
Forum Hero
*****

Reputation Power: 22 
flyingboxcar barely matters.flyingboxcar barely matters.
Offline Offline

City: Chennai
State: Tamil Nadu
RC Skills: Intermediate
Posts: 1768
Join Date: Apr, 2009



More shot of the dynamix carbs
This shot shows the carb fully open.
Unfortunately while I took  the engine out today I realised that the slide and throat had started to rust. So some more oil was added to the parts to keep them safe. I am going to get a tin of grease and pack the small steel parts with it so that no way these would rust. The current situation of the rust on this is not worrisome, nothing which a bit of wire brush on a dremel can not take care of

Engine Series 1 082.jpg
Re: Engines, Engines and more Engines...!!!
* Engine Series 1 082.jpg (60.13 KB, 800x450 - viewed 1190 times.)
Logged

If you are really into scale you should be here. www.rcscalebuilder.com
 

Read
« Reply #18 on: May 29, 2011, 12:59:07 AM »
flyingboxcar
Plane Lover
Forum Hero
*****

Reputation Power: 22 
flyingboxcar barely matters.flyingboxcar barely matters.
Offline Offline

City: Chennai
State: Tamil Nadu
RC Skills: Intermediate
Posts: 1768
Join Date: Apr, 2009



The carb half open
You should be able to get the idea, the rectangualr slide has a circular hole and it covers or opens the carb throat. The result is said to be more linear throttle response. High Speed Needle is on the left and the brass knurled knob on the right is to to adjust the slow speed needle. The threaded rod with the brass ball takes a ball link from the throttle servo. The ball is also threaded and can be moved anywhere on the threaded rod for max mechanical advantage. Not very clear in the pic is the slow speed needle which again is a hollow cylinder which moves over a needle along with the main slide to vary the fuel supply. This can be seen just below the spring laoded slow speed needle on the right
Mechanism of the carb can be seen at the pic (look at the diagram just above the left side of the carb you can clearly make out the slide and the slow speed mechanism 

Engine Series 1 085.jpg
Re: Engines, Engines and more Engines...!!!
* Engine Series 1 085.jpg (68.61 KB, 800x450 - viewed 1188 times.)
Logged

If you are really into scale you should be here. www.rcscalebuilder.com
 

Read
« Reply #19 on: May 29, 2011, 01:11:36 AM »
flyingboxcar
Plane Lover
Forum Hero
*****

Reputation Power: 22 
flyingboxcar barely matters.flyingboxcar barely matters.
Offline Offline

City: Chennai
State: Tamil Nadu
RC Skills: Intermediate
Posts: 1768
Join Date: Apr, 2009



Since we were talking of cheap chinese imports, how about one such engine??
So here is one from China Shang or commonly known as CS engines. This one is apparently a copy of the Russian Norvel with some distinctive features of its own.
NIB CS 06 Glow RC. The engine was picked up from RCD

Engine Series 1 029.jpg
Re: Engines, Engines and more Engines...!!!
* Engine Series 1 029.jpg (39.6 KB, 800x450 - viewed 1037 times.)
This post has 1 more images(s)/attachment(s). Please login or register to view them.
Logged

If you are really into scale you should be here. www.rcscalebuilder.com
 

Read
« Reply #20 on: May 29, 2011, 11:30:43 PM »
flyingboxcar
Plane Lover
Forum Hero
*****

Reputation Power: 22 
flyingboxcar barely matters.flyingboxcar barely matters.
Offline Offline

City: Chennai
State: Tamil Nadu
RC Skills: Intermediate
Posts: 1768
Join Date: Apr, 2009



Some more of the CS
1. Right side view and as supplied with a piece of plastic tubing. You can also spot the single bolt which retains the muffler
2. Engines front view
3. Close up of the carb
5. Left side view with the CS and made in China marking clearly visible
6. Rear view

Engine Series 1 033_opt.jpg
Re: Engines, Engines and more Engines...!!!
* Engine Series 1 033_opt.jpg (40.39 KB, 400x225 - viewed 1233 times.)
This post has 3 more images(s)/attachment(s). Please login or register to view them.
Logged

If you are really into scale you should be here. www.rcscalebuilder.com
 

Read
« Reply #21 on: May 29, 2011, 11:39:04 PM »
flyingboxcar
Plane Lover
Forum Hero
*****

Reputation Power: 22 
flyingboxcar barely matters.flyingboxcar barely matters.
Offline Offline

City: Chennai
State: Tamil Nadu
RC Skills: Intermediate
Posts: 1768
Join Date: Apr, 2009



The all greek and latin instructions (apparently they did not intend to sell this anywhere out of mainland China, else they would have included bi-lingual instructions as well  Giggle)

Recommended prop sizes are 6x3 and with APC the claimed RPM is around 14K (not bad!!)

Three views of the engine (but dimensions are missing)  

Engine Series 1 038_opt.jpg
Re: Engines, Engines and more Engines...!!!
* Engine Series 1 038_opt.jpg (23.8 KB, 400x225 - viewed 1186 times.)
This post has 2 more images(s)/attachment(s). Please login or register to view them.
Logged

If you are really into scale you should be here. www.rcscalebuilder.com
 

Read
« Reply #22 on: May 29, 2011, 11:47:58 PM »
flyingboxcar
Plane Lover
Forum Hero
*****

Reputation Power: 22 
flyingboxcar barely matters.flyingboxcar barely matters.
Offline Offline

City: Chennai
State: Tamil Nadu
RC Skills: Intermediate
Posts: 1768
Join Date: Apr, 2009



So moving back from the Mainland China to Europe. We have here an Engine which today is made by MECOA in US who bought the toolings and right for all the engines made by this original mfrs from Austria.
The original mfrs main business was making live munitions and they also diversified into model IC engines and what a line of engines they had.

So here is one from thier line up
1. A NIB HP VT 21 4 Stroke
2. Any body here knows how to translate whats there on the box?
3. Label that indicates whats inside the box. From what I have observed I have three different HP engines and all of them have same box. Only the label indicates what's there inside
4. The box on opening     

Engine Series 1 041_opt.jpg
Re: Engines, Engines and more Engines...!!!
* Engine Series 1 041_opt.jpg (19.1 KB, 400x225 - viewed 1076 times.)
This post has 3 more images(s)/attachment(s). Please login or register to view them.
Logged

If you are really into scale you should be here. www.rcscalebuilder.com
 

Read
« Reply #23 on: May 29, 2011, 11:53:48 PM »
flyingboxcar
Plane Lover
Forum Hero
*****

Reputation Power: 22 
flyingboxcar barely matters.flyingboxcar barely matters.
Offline Offline

City: Chennai
State: Tamil Nadu
RC Skills: Intermediate
Posts: 1768
Join Date: Apr, 2009



The engine is supplied with lot of documents and advertisement materials.
1. One of these is full line up of HP Gold Cup engines (the other line was silver star). If you observe there are marine and car engines as well Thumbs Up
2. The engine diagram showing some of the innard parts (notice how the crank is split in this engine and you would be amazed at how the same feature also figures in one of the engines to be posted later)
3. Technical data
4. Engine as in the box and no that brass thing on top left is not an empty case it is a muffler for the engine. Now you can clearly see what the mfrs made as thier main product

Engine Series 1 048_opt.jpg
Re: Engines, Engines and more Engines...!!!
* Engine Series 1 048_opt.jpg (47.85 KB, 400x711 - viewed 1144 times.)
This post has 3 more images(s)/attachment(s). Please login or register to view them.
Logged

If you are really into scale you should be here. www.rcscalebuilder.com
 

Read
« Reply #24 on: May 30, 2011, 12:05:27 AM »
flyingboxcar
Plane Lover
Forum Hero
*****

Reputation Power: 22 
flyingboxcar barely matters.flyingboxcar barely matters.
Offline Offline

City: Chennai
State: Tamil Nadu
RC Skills: Intermediate
Posts: 1768
Join Date: Apr, 2009



1. Now here's the full muffler. Looks dainty ain't it?
2. Limited warranty from, hold it .... yes Tower Hobbies apparently they did carry this line up in days gone by
3. Looking from the front
4. And from the right

Engine Series 1 057_opt.jpg
Re: Engines, Engines and more Engines...!!!
* Engine Series 1 057_opt.jpg (16.15 KB, 400x225 - viewed 1136 times.)
This post has 3 more images(s)/attachment(s). Please login or register to view them.
Logged

If you are really into scale you should be here. www.rcscalebuilder.com
 

Pages: [1] 2 3 ... 16   Go Up
Jump to:  

Related Topics
Subject Started by Replies Views Last post
ASP Engines : anyone using? « 1 2  All »
Fuel and Engines
amir 32 27761 Last post January 14, 2012, 09:37:50 AM
by sanjayrai55
Engines
For Sale
theaviator 9 9917 Last post December 04, 2009, 12:50:28 PM
by sbajare
MT Engines MT 57 & MT 80
Fuel and Engines
rcdhamaka 0 3196 Last post March 10, 2010, 04:07:36 PM
by rcdhamaka
What oil in the jet engines
Fuel and Engines
asupan 7 8401 Last post December 31, 2014, 12:13:24 AM
by sundaram
cox engines
Wanted
Nehutech 7 5030 Last post June 18, 2014, 10:34:52 AM
by Pradu