|
Title: size of spinner Post by: laldenga on June 01, 2010, 09:39:55 PM What size of spinner should i use for 11 X 6 size master air screw propeller
Title: Re: size of spinner Post by: RotorZone on June 01, 2010, 10:07:30 PM 2 1/2 inch one.
Title: Re: size of spinner Post by: sushil_anand on June 02, 2010, 10:41:08 AM What size of spinner should i use for 11 X 6 size master air screw propeller The spinner size is really dictated by the cowling. The spinner backplate should be the same or very slightly smaller than the front of the cowl to make it look realistic. Of course, if there is no cowl, then it becomes uncritical. Use whatever size looks good to you! Title: Re: size of spinner Post by: anwar on June 06, 2010, 11:38:33 PM I asked around, most people on our field are using 2 1/4 inch ones. Must be an availability thing.
|