RC India

http://www.himodel.com/engines/NGH_9CC_Petrol_Engine_for_Radio_Control_Aeroplane_GT9.html#
Saw this engine last friday at Dubai Field. It looks much easier to tune. Quiet powerful for the size and weight(Less than 550gms)

Nice. This or a derivative will soon feature in cars. HPI racing Savage with gasoline engine is expected soon. I thought the Saito ones were the smallest. But weight at 545gms is a concern.

They are available here in India with us. Stocks are been updated and can be bought from Monday noon.

Please reserve two for me. I will buy right away but will be able to take delivery only after 15th Jan  after my leave.

whats the price? and any discount of new product launching?

Manoj bhai  - Are these 9cc engines being used on .40 and .46 sized models ? Are people doing 3D (prop-hanging / torque rolls) with these ?

Does the package include a silencer? On the RCD webpage it does'nt show one

What kind of muffler/tuned pipe will be needed? RCD- can you provide?

Standard Fit with NGH 9CC

OK. Thanks Augustine

Not flying this morning?

Thanks Sanjay, yeah just finished 4 sorties on the YAK  ( prep for the meet) in the office now. I have a 15 cc , good engine very good pull, can swing a bigger prop, rcexel ignition unit doesn't require cooling (at least here , it is -7 deg in the morning) , finding the spark plug is a big PIA, one caution for all who are buying this engine, please check all fitting before starting, my walbro carb came loose and hit the prop, it was a wooden prop so no damage to the carb , prop broke. It will be a challenge to find gas pipe which is flexible enough for fitting inside the small fuel tank, I had to add additional weight so that the klunk falls easily,

-7!

Here I was freezing my a** off in Delhi at 3 deg C! Fingers working OK on the sticks in the cold?

A prop nick in the cold really hurts :(

My flying gloves (dupont) works fine, thinking of fitting skids, one inch of frost on the grass, engine requires good 3-5 mts of running for warm up, 5000 rpm is good rpm for break in and warm up.

One  inch of frost!!!!!! OMG....  I am happily enjoying here in Trichy. :)

@sundaram sir how long will u be there in Trichy?

Till end of this month and then will be going to Pune.

@ Anwar Gi..
Sorry for the late response.. I have only seen it once at the field with Mr. Buti Swaidan. It was fitted on a High wing trainer and was flying great. I will check with him regarding the real performance an update. He was trying it for the first time. Mr.Buti has a new shop near The Al Sili flying field.
Please check out this video. Mr. Buti is the one in Red T Shirt.
http://www.youtube.com/watch?v=pvPmjIUD0YE

@RCDHAMAKA
Do you have any experiance with this engine / the performance ?

9cc has set course from Bangalore, awaiting its arrival at Shillong. first one goes into my scratch built yellow bird,

Great.... :thumbsup: Do let us know the performamce of this engine sir.. It looks easy to tune for a beginer in Gas (Same as a nitro engine)...

:Rs: 9800 at RCDhamaka , with free shiping!!

http://www.rcdhamaka.com/index.php?main_page=product_info&cPath=58_61&products_id=888

But 14% VAT kills :((

Hi,
Question for all Engine & Heli Gurus
Will this go into a 50 size heli & work

Regards

I never flew a heli except in simulator. I don’t think its meant for Heli. Its bulky, Less RPM compared to a heli engine etc etc. From the looks,  you may have to make lot of modifications on the heli kit to suit it. I hope some one fly a heli will reply..

Augustinev sir, did you get your engine? Any update for us :-)

Got the engine full update by the weekend here

http://www.rcindia.org/fuel-and-engines/review-ngh-engines-gt9-(9-07-cc)/msg85549/#msg85549