Title: HM-Modelltechnik Concorde (EDF / Turbine) Post by: DominicM on November 21, 2020, 02:11:33 PM Amazing flights by Seba Silvestri experimenting with the broad CG range of this iconic airliner. An additional kit to install the realistic nose movement is available. It can either be powered by two 90mm EDFs with 12S 8000mAh Lipos or one or two turbines.
Length: 3400mm Wingspan: 1450mm Engine: 2× 90mm Electric Ducted Fan or 2 x 45N turbine Battery: 12S 8000mA/h (2x6s 8000mA/h) Flying Time: ~ 7 Minutes Take Off Weight: Depending on the equipment 11-12 kg https://www.youtube.com/watch?v=hPGDhscw7DE Title: Re: HM-Modelltechnik Concorde (EDF / Turbine) Post by: sanjayrai55 on November 21, 2020, 05:04:42 PM Thanks Dominic
You didn't show Silvestri pulling out of the vertical dive!! What exactly is the "broad CG range" Title: Re: HM-Modelltechnik Concorde (EDF / Turbine) Post by: DominicM on November 21, 2020, 05:21:22 PM All I can show is it showed 2 flights and on the second they had added weight to the tail and it flew equally well. If anyone purchased the model kit Harald at HM-Modelltechnik would share specific CG information.
Title: Re: HM-Modelltechnik Concorde (EDF / Turbine) Post by: sanjayrai55 on November 21, 2020, 05:35:21 PM :salute:
|