|
Title: MXS-R 70 3D Assembly Thread Post by: umayash1 on February 05, 2013, 09:20:55 PM Hello All,
Uploading sum assembly pics of Goldwing MXS-R 70 3D.. Setup- OS 55 AX Hitec HS-475HB All around Radio- Futaba 9CHP T@nm@y Title: Re: MXS-R 70 3D Assembly Thread Post by: umayash1 on February 05, 2013, 09:22:36 PM more..
Title: Re: MXS-R 70 3D Assembly Thread Post by: umayash1 on February 05, 2013, 09:23:24 PM ...
Title: Re: MXS-R 70 3D Assembly Thread Post by: umayash1 on February 05, 2013, 09:24:10 PM ...
Title: Re: MXS-R 70 3D Assembly Thread Post by: umayash1 on February 05, 2013, 09:24:58 PM ...
Title: Re: MXS-R 70 3D Assembly Thread Post by: umayash1 on February 05, 2013, 09:25:30 PM ...
Title: Re: MXS-R 70 3D Assembly Thread Post by: umayash1 on February 05, 2013, 09:25:59 PM ;) ;) ;) ;)
Title: Re: MXS-R 70 3D Assembly Thread Post by: vishal on February 05, 2013, 09:39:11 PM Wow! This looks great.
:thumbsup: Title: Re: MXS-R 70 3D Assembly Thread Post by: umayash1 on February 05, 2013, 10:55:23 PM Thanks- Vishal..
Title: Re: MXS-R 70 3D Assembly Thread Post by: rcpilotacro on February 06, 2013, 09:00:56 AM Umayash
Good Build, isn't throttle servo throw less since your connection on the servo is on the inner most hole of the servo horn ? Just Curious, also remote glow once covered with the cowling needs frequent inspection, has the tendency to come off. Needless to say a superb flier, just picked up a 30cc version :thumbsup: for your maiden Title: Re: MXS-R 70 3D Assembly Thread Post by: sundaram on February 06, 2013, 09:10:11 AM Excellent Build :thumbsup:
Some flight video is awaited. :) Title: Re: MXS-R 70 3D Assembly Thread Post by: sravan on February 06, 2013, 08:55:39 PM Isnt it little underpowered for 3d with OS 55? R u using nitro?
Title: Re: MXS-R 70 3D Assembly Thread Post by: vineet on February 07, 2013, 12:30:31 PM wow and what about that plane in profile pic
Title: Re: MXS-R 70 3D Assembly Thread Post by: umayash1 on February 07, 2013, 12:37:38 PM @Sravan- OS 55AX (2 stroke) is recommended engine for this plane.. Can also Put 70-90 size four stroke engine, @Vineet- Its a real cessna 172R..
Title: Re: MXS-R 70 3D Assembly Thread Post by: vineet on February 07, 2013, 12:41:40 PM and do not tell me you have that also (:|~
Title: Re: MXS-R 70 3D Assembly Thread Post by: umayash1 on February 07, 2013, 12:42:53 PM LOLZz..
Title: Re: MXS-R 70 3D Assembly Thread Post by: shadman_alam on February 13, 2013, 01:24:56 AM this model deserves a fourstroke.. and or electric.. . if u are looking for 3d .. 2stroke isnt the right option..
Title: Re: MXS-R 70 3D Assembly Thread Post by: sanjayrai55 on February 13, 2013, 10:59:25 AM What a beautiful model. Very clean assembly, :salute: {:)}
All the best for the maiden :thumbsup: Title: Re: MXS-R 70 3D Assembly Thread Post by: umayash1 on March 19, 2014, 10:36:28 PM After 50 Flights on OS 55AX,
Converted it into a Electric Setup. Not tested Yet, But will upload the flying videos soon. Main Aim is to do "Rolling Harriers" ;D Setup:- Motor- Turnigy Aerodrive SK3 - 5045-450kv Brushless Motor ESC- Turnigy Brushless ESC 85A w/ 5A SBEC Battery- Turnigy nano-tech 3000mah 6S 25~50C Lipo Prop- APC 15X8 Title: Re: MXS-R 70 3D Assembly Thread Post by: Dr. Abhishek Agrawal on March 19, 2014, 11:01:25 PM Good Luck upload video soon :thumbsup:
Title: Re: MXS-R 70 3D Assembly Thread Post by: sanjayrai55 on March 20, 2014, 07:11:55 AM What sort of flying time would you expect on this set-up Tanmay?
Title: Re: MXS-R 70 3D Assembly Thread Post by: controlflyer on March 20, 2014, 08:49:02 AM nice build..
Title: Re: MXS-R 70 3D Assembly Thread Post by: umayash1 on March 20, 2014, 12:18:26 PM @Sanjay Sir:- Expecting a easy 10 min of Hard 3D Flying,
AUW comes in tipping the scale at 4.8Lbs total with battery! 1,260 Watts at only 4.8Lbs give this beast a power to weight ratio of 262 watts Per 1 Lbs ! Title: Re: MXS-R 70 3D Assembly Thread Post by: sanjayrai55 on March 20, 2014, 02:12:03 PM Excellent! {:)} {:)}
Will be following this with keen anticipation Title: Re: MXS-R 70 3D Assembly Thread Post by: rohit256 on March 20, 2014, 05:13:43 PM beautiful ...........................
Title: Re: MXS-R 70 3D Assembly Thread Post by: umayash1 on November 28, 2014, 02:20:51 PM Prop Hanging:-
https://www.youtube.com/watch?v=9EH1MdxZLDU (https://www.youtube.com/watch?v=9EH1MdxZLDU) Title: Re: MXS-R 70 3D Assembly Thread Post by: sanjayrai55 on November 28, 2014, 05:29:05 PM Nice one, Tanmay :D
Title: Re: MXS-R 70 3D Assembly Thread Post by: umayash1 on November 28, 2014, 07:14:22 PM Thank you Sir
Title: Re: MXS-R 70 3D Assembly Thread Post by: umayash1 on December 19, 2014, 07:48:41 PM Some Prop hanging Pics..
|